A Themed Issue Dedicated to Professor John B. Goodenough on the Occasion of His 100th Birthday Anniversary

This book of Molecules is dedicated to Professor John B. Goodenough (born July 25, 1922, Jena, Germany), an American physicist, who won the 2019 Nobel Prize for Chemistry for his work on developing lithium-ion batteries

An overview and prospective on Al and Al-ion battery technologies

Aluminum batteries are considered compelling electrochemical energy storage systems because of the natural abundance of aluminum, the high charge storage capacity of aluminum of 2980 mA h g−1/8046 mA h cm−3, and the sufficiently low redox potential of Al3+/Al. Several electrochemical storage technologies based on aluminum have been proposed so far. This review classifies the types of reported Al-batteries into two main groups: aqueous (Al-ion, and Al-air) and non-aqueous (aluminum graphite dual-ion, Al-organic dual-ion, Al-ion, and Al-sulfur). Specific focus is given to Al electrolyte chemistry based on chloroaluminate melts, deep eutectic solvents, polymers, and “chlorine-free” formulations

An overview and prospective on Al and Al-ion battery technologies

Aluminum batteries are considered compelling electrochemical energy storage systems because of the natural abundance of aluminum, the high charge storage capacity of aluminum of 2980 mA h g−1/8046 mA h cm−3, and the sufficiently low redox potential of Al3+/Al. Several electrochemical storage technologies based on aluminum have been proposed so far. This review classifies the types of reported Al-batteries into two main groups: aqueous (Al-ion, and Al-air) and non-aqueous (aluminum graphite dual-ion, Al-organic dual-ion, Al-ion, and Al-sulfur). Specific focus is given to Al electrolyte chemistry based on chloroaluminate melts, deep eutectic solvents, polymers, and “chlorine-free” formulations

金属有機構造体からの機能性多孔性炭素材料の合成

早大学位記番号:新7976早稲田大

Supercapacitors for the Next Generation

Supercapacitors are presently applied in various devices and have the potential to be used in many fields in the future. For example, the use of supercapacitors is currently limited not only to automobiles, buses, and trucks, which have been electrified recently, but also to railways and aircraft. We believe that these devices are the most suitable physical batteries for absorbing regenerative energy produced during motor regeneration; thus, further research and development in this direction is expected in the future

Pressurized CO2 Electrochemical Conversion to Formic Acid: From Theoretical Model to Experimental Results

To curb the severely rising levels of carbon dioxide in the atmosphere, new approaches to capture and utilize this greenhouse gas are currently being investigated. In the last few years, many researches have focused on the electrochemical conversion of CO2 to added-value products in aqueous electrolyte solutions. In this backdrop, the pressurized electroreduction of CO2 can be assumed an up-and-coming alternative process for the production of valuable organic chemicals [1-3]. In this work, the process was studied in an undivided cell with tin cathode in order to produce formic acid and develop a theoretical model, predicting the effect of several operative parameters. The model is based on the cathodic conversion of pressurized CO2 to HCOOH and it also accounts for its anodic oxidation. In particular, the electrochemical reduction of CO2 to formic acid was performed in pressurized filter press cell with a continuous recirculation of electrolytic solution (0.9 L) at a tin cathode (9 cm2) for a long time (charge passed 67’000 C). It was shown that it is possible to scale-up the process by maintaining good results in terms of faradaic efficiency and generating significantly high concentrations of HCOOH (about 0.4 M) [4]. It was also demonstrated that, for pressurized systems, the process is under the mixed kinetic control of mass transfer of CO2 and the reduction of adsorbed CO2 (described by the Langmuir equation), following our proposed reaction mechanism [5]. Moreover, the theoretical model is in good agreement with the experimental results collected and well describes the effect of several operating parameters, including current density, pressure, and the type of reactor used. 1. Ma, S., & Kenis, P. J. (2013). Electrochemical conversion of CO2 to useful chemicals: current status, remaining challenges, and future opportunities. Current Opinion in Chemical Engineering, 2(2), 191-199. 2. Endrődi, B., Bencsik, G., Darvas, F., Jones, R., Rajeshwar, K., & Janáky, C. (2017). Continuous-flow electroreduction of carbon dioxide. Progress in Energy and Combustion Science, 62, 133-154. 3. Dufek, E. J., Lister, T. E., Stone, S. G., & McIlwain, M. E. (2012). Operation of a pressurized system for continuous reduction of CO2. Journal of The Electrochemical Society, 159(9), F514-F517. 4. Proietto, F., Schiavo, B., Galia, A., & Scialdone, O. (2018). Electrochemical conversion of CO2 to HCOOH at tin cathode in a pressurized undivided filter-press cell. Electrochimica Acta, 277, 30-40. 5. Proietto, F., Galia, A., & Scialdone, O. (2019) Electrochemical conversion of CO2 to HCOOH at tin cathode: development of a theoretical model and comparison with experimental results. ChemElectroChem, 6, 162-172

Effect of the air pressure on electro-Fenton process

Electro-Fenton process is considered a very promising tool for the treatment of waste waters contaminated by organic pollutants refractant or toxic for microorganisms used in biological processes [1-6]. In these processes H2O2 is continuously supplied to an acidic aqueous solution contained in an electrolytic cell from the two-electron reduction of oxygen gas, directly injected as pure gas or bubbled air. Due to the poor solubility of O2 in aqueous solutions, two dimensional cheap graphite or carbon felt electrodes give quite slow generation of H2O2, thus resulting in a slow abatement of organics. In this context, we report here a series of studies [7-9] on the effect of air pressure on the electro-generation of H2O2 and the abatement of organic pollutants in water by electro-Fenton process. The effect of air pressure, current density, mixing and nature of the organic pollutant was evaluated. [1] E. Brillas, I. Sirés, M.A. Oturan, Chem. Rev., 109 (2009) 6570-6631. [2] C.A. Martínez-Huitle, M.A. Rodrigo, I. Sirés, O. Scialdone, Chem. Rev. 115 (2015) 13362–13407. [3] M. Panizza, G. Cerisola, Chem. Rev. 109 (2009) 6541–6569. [4] I. Sirés, E. Brillas, M.A. Oturan, M.A. Rodrigo, M. Panizza, Environ. Sci. Pollut. Res. 21 (2014) 8336–8367. [5] C.A. Martínez-Huitle, S. Ferro, Chem. Soc. Rev. 35 (2006) 1324–1340. [6] B.P.P. Chaplin, Environ. Sci. Process. Impacts. 16 (2014) 1182–1203. [7] O. Scialdone, A. Galia, C. Gattuso, S. Sabatino, B. Schiavo, Electrochim. Acta, 182 (2015) 775-780. [8] J.F. Pérez, A. Galia, M.A. Rodrigo, J. Llanos, S. Sabatino, C. Sáez, B. Schiavo, O. Scialdone, Electrochim. Acta, 248 (2017) 169-177. [9] A.H. Ltaïef, S. Sabatino, F. Proietto, A. Galia, O. Scialdone, O. 2018, Chemosphere, 202, 111-118

State-of-the-art materials science in Belgium 2017

This book is a collection of both review and original research papers which appeared in a Special Issue of the open access journal, Materials, “State-of-the-Art Materials Science in Belgium 2017”. It covers a wide range of selected material topics, currently under investigation at universities throughout Belgium. As a country, Belgium has hardly any physical resources which can be exploited in materials research and development or industry. However, the resource drawback is compensated by focussing on highly technological fields of research, not requiring vast amounts of raw material. This ‘high-tech’ approach includes the development of new analytical methods for the characterization of materials, research into new advanced functional materials, as well as defining new industrial processes for existing materials. As such, the book presents a contemporary view on materials research activities in Belgium

Graphene-based metal-organic framework hybrids for applications in catalysis, environmental, and energy technologies

Current energy and environmental challenges demand the development and design of multifunctional porous materials with tunable properties for catalysis, water purification, and energy conversion and storage. Because of their amenability to de novo reticular chemistry, metal-organic frameworks (MOFs) have become key materials in this area. However, their usefulness is often limited by low chemical stability, conductivity and inappropriate pore sizes. Conductive two-dimensional (2D) materials with robust structural skeletons and/or functionalized surfaces can form stabilizing interactions with MOF components, enabling the fabrication of MOF nanocomposites with tunable pore characteristics. Graphene and its functional derivatives are the largest class of 2D materials and possess remarkable compositional versatility, structural diversity, and controllable surface chemistry. Here, we critically review current knowledge concerning the growth, structure, and properties of graphene derivatives, MOFs, and their graphene@MOF composites as well as the associated structure- property-performance relationships. Synthetic strategies for preparing graphene@MOF composites and tuning their properties are also comprehensively reviewed together with their applications in gas storage/separation, water purification, catalysis (organo-, electro-, and photocatalysis), and electrochemical energy storage and conversion. Current challenges in the development of graphene@MOF hybrids and their practical applications are addressed, revealing areas for future investigation. We hope that this review will inspire further exploration of new graphene@MOF hybrids for energy, electronic, biomedical, and photocatalysis applications as well as studies on previously unreported properties of known hybrids to reveal potential "diamonds in the rough".Web of Science12224173381724