Merged Two-Stage Power Converter With Soft Charging Switched-Capacitor Stage in 180 nm CMOS

In this paper, we introduce a merged two-stage dc-dc power converter for low-voltage power delivery. By separating the transformation and regulation function of a dc-dc power converter into two stages, both large voltage transformation and high switching frequency can be achieved. We show how the switched-capacitor stage can operate under soft charging conditions by suitable control and integration (merging) of the two stages. This mode of operation enables improved efficiency and/or power density in the switched-capacitor stage. A 5-to-1 V, 0.8 W integrated dc-dc converter has been developed in 180 nm CMOS. The converter achieves a peak efficiency of 81%, with a regulation stage switching frequency of 10 MHz.Interconnect Focus Center (United States. Defense Advanced Research Projects Agency and Semiconductor Research Corporation

Two-stage power conversion architecture for an LED driver circuit

This paper presents a merged-two-stage circuit topology suitable for efficient LED drivers operating from either wide-range dc input voltage or ac line voltage. This two-stage topology is based on a soft-charged switched-capacitor pre-regulator/transformation stage and a high-frequency magnetic regulator stage. Soft charging of the switched capacitor circuit, zero voltage switching of the high-frequency regulator circuit, and time-based indirect scale current control are used to maintain high efficiency, high power density, and high power factor. Two implementations of the proposed architecture are demonstrated: a wide input voltage range dc-dc converter and a line interfaced ac-dc converter. The dc-dc converter shows 85–95% efficiency at 20 W power across 25–200 V input voltage range, and the ac-dc converter achieves 88% efficiency with 0.93 power factor at 8.4 W average power

Modular Switched-Capacitor DC-DC Converters Tied with Lithium-Ion Batteries for use in Battery Electric Vehicles

Abstract-This paper presents a modular switched-capacitor (SC) dc-dc converter based electric drive system for battery electric vehicles. In such a system, modularized lithium-ion battery cell tied MOSFET SC converters are used instead of the more conventional IGBT boost converter. Following the drive train architecture, the modeling approach for each electrical component, including the battery set, dc-dc and dc-ac converters, ac machines, and their control is discussed. Emphasis is given on state of the art lithium-ion battery models and SC converter design. System level performance is analyzed based on simulation results across drive cycles. Hardware including a three-cell lithium-ion battery tied SC converter module is built and tested. Application notes such as economic and spacing constraints are addressed

Adaptive Processes in Hearing

Our auditory environment is constantly changing and evolving over time, requiring us to rapidly adapt to a complex dynamic sensory input. This adaptive ability of our auditory system can be observed at different levels, from individual cell responses to complex neural mechanisms and behavior, and is essential to achieve successful speech communication, correct orientation in our full environment, and eventually survival. These adaptive processes may differ in individuals with hearing loss, whose auditory system may cope via “readapting” itself over a longer time scale to the changes in sensory input induced by hearing impairment and the compensation provided by hearing devices. These devices themselves are now able to adapt to the listener’s individual environment, attentional state, and behavior. These topics related to auditory adaptation, in the broad sense of the term, were central to the 6th International Symposium on Auditory and Audiological Research held in Nyborg, Denmark, in August 2017. The symposium addressed adaptive processes in hearing from different angles, together with a wide variety of other auditory and audiological topics. The papers in this special issue result from some of the contributions presented at the symposium

Power conversion architecture for grid interface at high switching frequency

This paper presents a new power conversion architecture for single-phase grid interface. The proposed architecture is suitable for realizing miniaturized ac-dc converters operating at high frequencies (HF, above 3 MHz) and high power factor, without the need for electrolytic capacitors. It comprises of a line-frequency rectifier, a stack of capacitors, a set of regulating converters, and a power combining converter (or set of power combining converters). The regulating converters have inputs connected to capacitors on the capacitor stack, and provide regulated outputs while also achieving high power factor, with twice-line-frequency energy buffered on the capacitor stack. The power combining converter combines power from the individual regulated outputs to a single output, and may also provide isolation. While this architecture can be utilized with a variety of circuit topologies, it is especially suited for systems operating at HF (above 3 MHz), and we introduce circuit implementations that enable efficient operation in this range. The proposed approach is demonstrated for an LED driver operating from 120 V[subscript ac], and supplying a 35 V, 30 W output. The prototype converter operates at a (variable) switching frequency of 5-10 MHz and an efficiency of > 93%. The converter achieves a displacement power density of 130 W/in[superscript 3], while providing a 0.89 power factor, without the use of electrolytic capacitors

A multilevel energy buffer and voltage modulator for grid-interfaced micro-inverters

Micro-inverters operating into the single-phase grid from solar photovoltaic (PV) panels or other low-voltage sources must buffer the twice-line-frequency variations between the energy sourced by the PV panel and that required for the grid. Moreover, in addition to operating over wide average power ranges, they inherently operate over a wide range of voltage conversion ratios as the line voltage traverses a cycle. These factors make the design of micro-inverters challenging. This paper presents a multilevel energy buffer and voltage modulator (MEB) that significantly reduces the range of voltage conversion ratios that the dc-ac converter portion of the micro-inverter must operate over by stepping its effective input voltage in pace with the line voltage. The MEB also functions as an active energy buffer to reduce the twice-line-frequency voltage ripple at the output of the solar panel. The small additional loss of the MEB can be compensated by the improved efficiency of the dc-ac converter stage, leading to a higher overall system efficiency. A prototype micro-inverter incorporating a MEB, designed for 27 V to 38 V dc input voltage, 230 V rms ac output voltage, and rated for line cycle average power of 70 W, has been built and tested in grid-connected mode. It is shown that the MEB can successfully enhance the performance of a single-phase grid-interfaced micro-inverter by increasing its efficiency and reducing the total size of the twice-line-frequency energy buffering capacitance

Miniaturized Low-Voltage Power Converters With Fast Dynamic Response

This paper demonstrates a two-stage approach for power conversion that combines the strengths of variable-topology switched capacitor techniques (small size and light-load performance) with the regulation capability of magnetic switch-mode power converters. The proposed approach takes advantage of the characteristics of complementary metal-oxide-semiconductor (CMOS) processes, and the resulting designs provide excellent efficiency and power density for low-voltage power conversion. These power converters can provide low-voltage outputs over a wide input voltage range with very fast dynamic response. Both design and fabrication considerations for highly integrated CMOS power converters using this architecture are addressed. The results are demonstrated in a 2.4-W dc-dc converter implemented in a 180-nm CMOS IC process and co-packaged with its passive components for high performance. The power converter operates from an input voltage of 2.7-5.5 V with an output voltage of ≤1.2 V, and achieves a 2210 W/in[superscript 3] power density with ≥80% efficiency.Focus Center Research ProgramUnited States. Defense Advanced Research Projects AgencySemiconductor Research CorporationCharles Stark Draper Laborator