Examination and comparison of different methods to model closed loop kinematic chains using Lagrangian formulation with cut joint, clearance joint constraint and elastic joint approaches

This work aims at presenting, in a comprehensive manner, several approaches to model and simulate closed loop topologies using the classical Lagrangian formulation. One of the great advantages of the Lagrangian approach is its simplicity and easiness of obtaining the equations of motion. However, a critical aspect arises when the mechanical systems include closed loop topologies, since the process of deriving the equations of motion becomes a complex task. The key point of the present study is to convert the closed loop nature into open systems, which ultimately simplifies the modeling process when the Lagrangian formulation is utilized. For this purpose, three different methods are considered, namely those based on the cut joint approach, the clearance joint constraint model, and the elastic joint formulation are used. In the sequel of this process, a slider-crank mechanism is utilized as a demonstrative application example, and the main results are compared with those obtained with the well-established Newton-Euler method for constrained multibody systems. Moreover, this example allows the comparison of the main characteristics and peculiarities of the described approaches.This work has been supported by Portuguese Foundation for Science and Technology, under the national support to R&D units grant, with the reference project UIDB/04436/2020 and UIDP/04436/2020, as well as through IDMEC, under LAETA, project UIDB/50022/202

Non-newtonian 3D ciliary fluid flow in a semi-infinite domain

This paper was presented at the 3rd Micro and Nano Flows Conference (MNF2011), which was held at the Makedonia Palace Hotel, Thessaloniki in Greece. The conference was organised by Brunel University and supported by the Italian Union of Thermofluiddynamics, Aristotle University of Thessaloniki, University of Thessaly, IPEM, the Process Intensification Network, the Institution of Mechanical Engineers, the Heat Transfer Society, HEXAG - the Heat Exchange Action Group, and the Energy Institute.Continuing our previous investigations in ciliary fluid transportation (Isvoranu et al., 2010) our present paper looks into the matter of non-newtonian fluid flow. Naturally, in constant properties fluids (newtonian fluids) ciliary transportation is based on a non-symmetric actuation mechanism meaning different geometrical configuration of the cilium during the active and passive stroke. Artificial cilia can mimick this behaviour through asymmetric magnetic actuation as discused in (Isvoranu et. al., 2008). What happens when fluid properties (eg. viscosity) are not constant throughout a beating cycle? Such situation is expected to be encountered when dealing with biological fluids like saliva, for example. In the case of a shear-thinning fluid, like the above mentioned one, the motion can also become asymetric due to deformation rate dependent viscosity that ultimately leads to different time scales of the forward and backward strokes. In the present paper we are investigating a 3D flow generated by an array of cilia embedded in a non-newtonian fluid whose viscosity is characterized by a power low shear rate dependency. The same magnetic actuation mechanism is considered

Bio-inspired Tensegrity Soft Modular Robots

In this paper, we introduce a design principle to develop novel soft modular robots based on tensegrity structures and inspired by the cytoskeleton of living cells. We describe a novel strategy to realize tensegrity structures using planar manufacturing techniques, such as 3D printing. We use this strategy to develop icosahedron tensegrity structures with programmable variable stiffness that can deform in a three-dimensional space. We also describe a tendon-driven contraction mechanism to actively control the deformation of the tensegrity mod-ules. Finally, we validate the approach in a modular locomotory worm as a proof of concept.Comment: 12 pages, 7 figures, submitted to Living Machine conference 201

Enhanced stiffness modeling of manipulators with passive joints

The paper presents a methodology to enhance the stiffness analysis of serial and parallel manipulators with passive joints. It directly takes into account the loading influence on the manipulator configuration and, consequently, on its Jacobians and Hessians. The main contributions of this paper are the introduction of a non-linear stiffness model for the manipulators with passive joints, a relevant numerical technique for its linearization and computing of the Cartesian stiffness matrix which allows rank-deficiency. Within the developed technique, the manipulator elements are presented as pseudo-rigid bodies separated by multidimensional virtual springs and perfect passive joints. Simulation examples are presented that deal with parallel manipulators of the Ortholide family and demonstrate the ability of the developed methodology to describe non-linear behavior of the manipulator structure such as a sudden change of the elastic instability properties (buckling)

Rate-independent soft crawlers

This paper applies the theory of rate-independent systems to model the locomotion of bio-mimetic soft crawlers. We prove the well-posedness of the approach and illustrate how the various strategies adopted by crawlers to achieve locomotion, such as friction anisotropy, complex shape changes and control on the friction coefficients, can be effectively described in terms of stasis domains. Compared to other rate-independent systems, locomotion models do not present any Dirichlet boundary condition, so that all rigid translations are admissible displacements, resulting in a non-coercivity of the energy term. We prove that existence and uniqueness of solution are guaranteed under suitable assumptions on the dissipation potential. Such results are then extended to the case of time-dependent dissipation

Stiffness modeling for perfect and non-perfect parallel manipulators under internal and external loadings

International audienceThe paper presents an advanced stiffness modeling technique for perfect and non-perfect parallel manipulators under internal and external loadings. Particular attention is paid to the manipulators composed of non-perfect serial chains, whose geometrical parameters differ from the nominal ones and do not allow to assemble manipulator without internal stresses that considerably affect the stiffness properties and also change the end-effector location. In contrast to other works, several types of loadings are considered simultaneously: an external force applied to the end-effector, internal loadings generated by the assembling of non-perfect serial chains and external loadings applied to the intermediate points (auxiliary loading due to the gravity forces and relevant compensator mechanisms, etc.). For this type of manipulators, a non-linear stiffness modeling technique is proposed that allows to take into account inaccuracy in the chains and to aggregate their stiffness models for the case of both small and large deflections. Advantages of the developed technique and its ability to compute and compensate the compliance errors caused by the considered factors are illustrated by an example that deals with parallel manipulators of the Orthoglide family

Multibody dynamics in robotics with focus on contact events

Multibody dynamics methodologies have been fundamental tools utilized to model and simulate robotic systems that experience contact conditions with the surrounding environment, such as in the case of feet and ground interactions. In addressing such problems, it is of paramount importance to accurately and efficiently handle the large body displacement associated with locomotion of robots, as well as the dynamic response related to contact-impact events. Thus, a generic computational approach, based on the Newton-Euler formulation, to represent the gross motion of robotic systems, is revisited in this work. The main kinematic and dynamic features, necessary to obtain the equations of motion, are discussed. A numerical procedure suitable to solve the equations of motion is also presented. The problem of modeling contacts in dynamical systems involves two main tasks, namely the contact detection and the contact resolution, which take into account for the kinematics and dynamics of the contacting bodies, constituting the general framework for the process of modeling and simulating complex contact scenarios. In order to properly model the contact interactions, the contact kinematic properties are established based on the geometry of contacting bodies, which allow to perform the contact detection task. The contact dynamics is represented by continuous contact force models, both in terms of normal and tangential contact directions. Finally, the presented formulations are demonstrated by the application to several robotics systems that involve contact and impact events with surrounding environment. Special emphasis is put on the systems’ dynamic behavior, in terms of performance and stability