Indoor wireless communications and applications

Chapter 3 addresses challenges in radio link and system design in indoor scenarios. Given the fact that most human activities take place in indoor environments, the need for supporting ubiquitous indoor data connectivity and location/tracking service becomes even more important than in the previous decades. Specific technical challenges addressed in this section are(i), modelling complex indoor radio channels for effective antenna deployment, (ii), potential of millimeter-wave (mm-wave) radios for supporting higher data rates, and (iii), feasible indoor localisation and tracking techniques, which are summarised in three dedicated sections of this chapter

A survey on acoustic positioning systems for location-based services

Positioning systems have become increasingly popular in the last decade for location-based services, such as navigation, and asset tracking and management. As opposed to outdoor positioning, where the global navigation satellite system became the standard technology, there is no consensus yet for indoor environments despite the availability of different technologies, such as radio frequency, magnetic field, visual light communications, or acoustics. Within these options, acoustics emerged as a promising alternative to obtain high-accuracy low-cost systems. Nevertheless, acoustic signals have to face very demanding propagation conditions, particularly in terms of multipath and Doppler effect. Therefore, even if many acoustic positioning systems have been proposed in the last decades, it remains an active and challenging topic. This article surveys the developed prototypes and commercial systems that have been presented since they first appeared around the 1980s to 2022. We classify these systems into different groups depending on the observable that they use to calculate the user position, such as the time-of-flight, the received signal strength, or the acoustic spectrum. Furthermore, we summarize the main properties of these systems in terms of accuracy, coverage area, and update rate, among others. Finally, we evaluate the limitations of these groups based on the link budget approach, which gives an overview of the system's coverage from parameters such as source and noise level, detection threshold, attenuation, and processing gain.Agencia Estatal de InvestigaciónResearch Council of Norwa

3D indoor positioning of UAVs with spread spectrum ultrasound and time-of-flight cameras

Este trabajo propone el uso de un sistema híbrido de posicionamiento acústico y óptico en interiores para el posicionamiento 3D preciso de los vehículos aéreos no tripulados (UAV). El módulo acústico de este sistema se basa en un esquema de Acceso Múltiple por División de Código de Tiempo (T-CDMA), en el que la emisión secuencial de cinco códigos ultrasónicos de espectro amplio se realiza para calcular la posición horizontal del vehículo siguiendo un procedimiento de multilateración 2D. El módulo óptico se basa en una cámara de Tiempo de Vuelo (TOF) que proporciona una estimación inicial de la altura del vehículo. A continuación se propone un algoritmo recursivo programado en un ordenador externo para refinar la posición estimada. Los resultados experimentales muestran que el sistema propuesto puede aumentar la precisión de un sistema exclusivamente acústico en un 70-80% en términos de error cuadrático medio de posicionamiento.This work proposes the use of a hybrid acoustic and optical indoor positioning system for the accurate 3D positioning of Unmanned Aerial Vehicles (UAVs). The acoustic module of this system is based on a Time-Code Division Multiple Access (T-CDMA) scheme, where the sequential emission of five spread spectrum ultrasonic codes is performed to compute the horizontal vehicle position following a 2D multilateration procedure. The optical module is based on a Time-Of-Flight (TOF) camera that provides an initial estimation for the vehicle height. A recursive algorithm programmed on an external computer is then proposed to refine the estimated position. Experimental results show that the proposed system can increase the accuracy of a solely acoustic system by 70–80% in terms of positioning mean square error.• Gobierno de España y Fondos para el Desarrollo Regional Europeo. Proyectos TARSIUS (TIN2015-71564-C4-4-R) (I+D+i), REPNIN (TEC2015-71426-REDT) y SOC-PLC (TEC2015-64835-C3-2-R) (I+D+i) • Junta de Extremadura, Fondos FEDER y Fondo Social Europeo. Proyecto GR15167 y beca predoctoral 45/2016 Exp. PD16030peerReviewe

Fast Chirped Signals for a TDMA Ultrasonic Indoor Positioning System

In this paper, a new concept for ultrasonic indoor positioning based on instantaneous frequency of ultrasonic signals is presented. Nonlinear phase characteristics of ultrasonic transducers introduce a frequency deviation in ultrasonic signals. By sweeping at very fast rates, a large spike in the deviation is introduced. The artefacts observable in instantaneous frequency estimations are highly localized and present an opportunity for accurate frequency detection. In order to be useful, the artefacts need to take place within the pulse and have sufficient magnitude for accurate processing. The system consists of a transducer transmitter and receiver pair, which have a center frequency of 40kHz and a bandwidth of 460Hz. In order to incorporate more transmitters, a time-division multiple access (TDMA) scheme is applied to ensure orthogonality of signals. The concept includes four ultrasonic transmitters and a single receiver, which can uniquely identify each transmitter by a distinct signal sweep. Linear chirp signals are used to form narrow pulses and ensure no interference in the TDMA scheme. The received signal is amplified and passed through a phase-locked loop (PLL) to detect the chirp signals. Accurate instantaneous frequency detection can be done on the voltage-controlled oscillator (VCO) of the PLL, which has a narrower bandwidth than the overall signal sweep. The instantaneous frequency estimation methods are largely explored in this work and consider two methods: the Hilbert transform and a zero-crossings method. This work highlights some of the advantages and disadvantages of both methods. Time of flight (ToF) in this system can ultimately be obtained by considering the instantaneous frequency estimations and the time for one particular frequency to be transmitted and received

A noncontact ultrasonic platform for structural inspection

Miniature robotic vehicles are receiving increasing attention for use in nondestructive testing (NDE) due to their attractiveness in terms of cost, safety, and their accessibility to areas where manual inspection is not practical. Conventional ultrasonic inspection requires the provision of a suitable coupling liquid between the probe and the structure under test. This necessitates either an on board reservoir or umbilical providing a constant flow of coupling fluid, neither of which are practical for a fleet of miniature robotic inspection vehicles. Air-coupled ultrasound offers the possibility of couplant-free ultrasonic inspection. This paper describes the sensing methodology, hardware platform and algorithms used to integrate an air-coupled ultrasonic inspection payload into a miniature robotic vehicle platform. The work takes account of the robot's inherent positional uncertainty when constructing an image of the test specimen from aggregated sensor measurements. This paper concludes with the results of an automatic inspection of a aluminium sample

Accurate acoustic ranging system using android smartphones

ACCURATE ACOUSTIC RANGING SYSTEM USING ANDROID SMARTPHONES By Mohammadbagher Fotouhi, Master of Science A thesis submitted in partial fulfillment of the requirements for the degree of Master of Science at Virginia Commonwealth University Virginia Commonwealth University 2017 Major Director: Dr. Ruixin Niu, Associate Professor of Department of Electrical and Computer Engineering In this thesis, we present the design, implementation, and evaluation of an android ranging system, a high-accuracy acoustic-based ranging system which allows two android mobile phones to learn their physical distance from each other. In this system we propose a practical solution for accurate ranging based on acoustic communication between speakers and microphones on two smartphones. Using the audible-band acoustic signal with the Wi-Fi assistance without the sound disturbance is promising for large deployment. Our method is a pure software-based solution and uses only the most basic set of commodity hardware: a speaker, a microphone, and Wi-Fi communication. So it is readily applicable to many commercial-off-the-shelf mobile devices like cell phones. Our system is the result of several design goals, including user privacy, decentralized administration, and low cost. Rather than relying on any centralized management which tracks the user’s location to help them find their distance, our system helps devices learn their distance from each other without advertising their location information with any centralized management. Compared to alternatives that require special-purpose hardware or pre-existence of precision location infrastructure , our system is applicable on most of off-the-shelf components so it is a commodity-based solution will obviously have wider applications and is cost effective. Currently, two smartphones are used to estimate the distance between them through Wi-Fi and audio communications. The basic idea is estimating the distance between two phones by estimating the traveling time of audio signal from one phone to the other as the speed of sound is known. The preliminary results of ranging demonstrate that our algorithm could achieve high accuracy, and stable and reliable results for real time smartphone-based indoor ranging

A novel indoor localization scheme based on fingerprinting technique And CDMA signals

International audience—In this paper, we propose a novel acoustic local-ization system based on fingerprinting technique. It deploys the Time Of Arrival of CDMA signals emitted by speakers to locate a microphone. The system is inspired from our earlier proposed scheme [1] which deploys the lateration method. Here, we adopt the fingerprinting technique since it is more applicable to indoor environments. The position estimation is accomplished through nonparametric kernel regression. Performance are evaluated by experiments, performed in a hall of interns in National School of Engineers of Le Mans. Results have shown that our proposed scheme provides an accuracy of 8.5 cm within 80% precision

Indoor Positioning Using Synchronized Ultrasonic OFDMA Signals

This paper proposes a method of short-range indoor localization using differential phase measurements of synchronized two-tone ultrasonic signals in an Orthogonal Frequency Multiple Access (OFDMA) scheme. This indoor positioning system (IPS) operates at an ultrasonic frequency of approximately 40kHz and synchronizes using an infrared signal. The OFDMA scheme allows for a receiver to process the signals from multiple transmitters continuously without the signals interfering with each other. The phases of the signals are measured using Goertzel Filters, allowing for low-complexity frequency content analysis. A MATLAB simulation using the proposed localization method is performed using four transmitter nodes in the corners of a 2.5m x 2.5m room and a receiver node within. The designs for the synchronizing transmitter node and the receiver node are then implemented in hardware and tested at 22cm and 28cm. The work described in this paper found that the proposed IPS functions correctly in simulation, and the hardware implementation of the receiver and transmitter provides accurate distance measurements with variance as low as 0.05cm. This variance is on the same order of magnitude as the wavelength of the ultrasonic signals used. The hardware used in the implementation of this design is low-power, low-cost, and easy to implement, but it carries with it design tradeoffs. The main difficulty introduced by the hardware is the generation of imperfectly orthogonal signals due to a time-discretization error imposed by the clock of the transmitter\u27s general purpose microcontroller. This error is theoretically and experimentally analyzed yielding closely matching values