Maximizing Communication Concurrency via Link-Layer Packet Salvaging in Mobile Ad Hoc Networks

Carrier-sense medium access control (MAC) protocols such as the IEEE 802.11 distributed coordination function (DCF) avoid collisions by holding up pending packet transmission requests when a carrier signal is observed above a certain threshold. However, this often results in unnecessarily conservative communication, thus making it difficult to maximize the utilization of the spatial spectral resource. This paper shows that a higher aggregate throughput can be achieved by allowing more concurrent communications and adjusting the communication distance on the fly, which needs provisions for the following two areas. On the one hand, carrier sense-based MAC protocols do not allow aggressive communication attempts when they are within the carrier senseable area. On the other hand, the communication distance is generally neither short nor adjustable because multihop routing protocols strive for providing minimum hop paths. This paper proposes a new MAC algorithm, called multiple access with salvation army (MASA), which adopts less sensitive carrier sensing to promote more concurrent communications and adjusts the communication distance adaptively via packet salvaging at the MAC layer. Extensive simulation based on the ns-2 has shown MASA to outperform the DCF, particularly in terms of packet delay. We also discuss the implementation of MASA based on the DCF specification

Minimizing Spatial and Time Reservation With Collision-Aware DCF in Mobile Ad Hoc Networks

Carrier sensing is widely adopted in wireless communication to protect data transfers from collisions. For example, distributed coordination function (DCF) in IEEE 802.11 standard renders a node to defer its communication if it senses the medium busy. For the duration of deferment, each frame carries, in its MAC header, a 16-bit number in microseconds during which any overhearing node must defer. However, even if the carrier signal is detected, both ongoing and a new communication can be simultaneously successful depending on their relative positions in the network or equivalently, their mutual interference level. Supporting multiple concurrent communications is important in multihop ad hoc networks in order to maximize the network performance. However, it is largely ignored in DCF of the 802.11 standards because it is primarily targeted at single-hop wireless LANs. In addition, in DCF, the time duration information mentioned above is not delivered to all potential interferers, particularly those in the distance. This paper proposes Collision-Aware DCF (CAD) that efficiently utilizes the available channel resource along with the spatial as well as time dimension. First, each node makes its deferment decision adaptively based on the feedback from the communication counterpart and the status of the medium rather than on a simple, fixed carrier sense threshold as DCF. Second, CAD embeds the spatial and time reservation requirements in the PHY header, which is transmitted at the lowest data rate, so that a larger group of neighbors become aware of the ongoing communication and thus avoid collisions. Extensive experiments based on ns-2 network simulator show that CAD consistently outperforms DCF regardless of node mobility, traffic intensity, and channel randomness. For practicality, this paper discusses the implementation of CAD based on the DCF specification

A Cooperative Diversity-Based Robust Mac Protocol in Wireless Ad Hoc Networks

In interference-rich and noisy environment, wireless communication is often hampered by unreliable communication links. Recently, there has been active research on cooperative communication that improves the communication reliability by having a collection of radio terminals transmit signals in a cooperative way. This paper proposes a medium access control (MAC) algorithm, called Cooperative Diversity MAC (CD-MAC), which exploits the cooperative communication capability of the physical (PHY) layer to improve robustness in wireless ad hoc networks. In CD-MAC, each terminal proactively selects a partner for cooperation and lets it transmit simultaneously so that this mitigates interference from nearby terminals, and thus, improves the network performance. For practicability, CD-MAC is designed based on the widely adopted IEEE 802.11 MAC. For accurate evaluation, this study presents and uses a realistic reception model by taking bit error rate (BER), derived from Intersil HFA3861B radio hardware, and the corresponding frame error rate (FER) into consideration. System-level simulation study shows that CD-MAC significantly outperforms the original IEEE 802.11 MAC in terms of packet delivery ratio and end-to-end delay

Exploiting the power of multiplicity: a holistic survey of network-layer multipath

The Internet is inherently a multipath network: For an underlying network with only a single path, connecting various nodes would have been debilitatingly fragile. Unfortunately, traditional Internet technologies have been designed around the restrictive assumption of a single working path between a source and a destination. The lack of native multipath support constrains network performance even as the underlying network is richly connected and has redundant multiple paths. Computer networks can exploit the power of multiplicity, through which a diverse collection of paths is resource pooled as a single resource, to unlock the inherent redundancy of the Internet. This opens up a new vista of opportunities, promising increased throughput (through concurrent usage of multiple paths) and increased reliability and fault tolerance (through the use of multiple paths in backup/redundant arrangements). There are many emerging trends in networking that signify that the Internet's future will be multipath, including the use of multipath technology in data center computing; the ready availability of multiple heterogeneous radio interfaces in wireless (such as Wi-Fi and cellular) in wireless devices; ubiquity of mobile devices that are multihomed with heterogeneous access networks; and the development and standardization of multipath transport protocols such as multipath TCP. The aim of this paper is to provide a comprehensive survey of the literature on network-layer multipath solutions. We will present a detailed investigation of two important design issues, namely, the control plane problem of how to compute and select the routes and the data plane problem of how to split the flow on the computed paths. The main contribution of this paper is a systematic articulation of the main design issues in network-layer multipath routing along with a broad-ranging survey of the vast literature on network-layer multipathing. We also highlight open issues and identify directions for future work

Self-adaptivity of applications on network on chip multiprocessors: the case of fault-tolerant Kahn process networks

Technology scaling accompanied with higher operating frequencies and the ability to integrate more functionality in the same chip has been the driving force behind delivering higher performance computing systems at lower costs. Embedded computing systems, which have been riding the same wave of success, have evolved into complex architectures encompassing a high number of cores interconnected by an on-chip network (usually identified as Multiprocessor System-on-Chip). However these trends are hindered by issues that arise as technology scaling continues towards deep submicron scales. Firstly, growing complexity of these systems and the variability introduced by process technologies make it ever harder to perform a thorough optimization of the system at design time. Secondly, designers are faced with a reliability wall that emerges as age-related degradation reduces the lifetime of transistors, and as the probability of defects escaping post-manufacturing testing is increased. In this thesis, we take on these challenges within the context of streaming applications running in network-on-chip based parallel (not necessarily homogeneous) systems-on-chip that adopt the no-remote memory access model. In particular, this thesis tackles two main problems: (1) fault-aware online task remapping, (2) application-level self-adaptation for quality management. For the former, by viewing fault tolerance as a self-adaptation aspect, we adopt a cross-layer approach that aims at graceful performance degradation by addressing permanent faults in processing elements mostly at system-level, in particular by exploiting redundancy available in multi-core platforms. We propose an optimal solution based on an integer linear programming formulation (suitable for design time adoption) as well as heuristic-based solutions to be used at run-time. We assess the impact of our approach on the lifetime reliability. We propose two recovery schemes based on a checkpoint-and-rollback and a rollforward technique. For the latter, we propose two variants of a monitor-controller- adapter loop that adapts application-level parameters to meet performance goals. We demonstrate not only that fault tolerance and self-adaptivity can be achieved in embedded platforms, but also that it can be done without incurring large overheads. In addressing these problems, we present techniques which have been realized (depending on their characteristics) in the form of a design tool, a run-time library or a hardware core to be added to the basic architecture

Maximizing Communication Concurrency via Link-Layer Packet Salvaging in Mobile Ad Hoc Networks

Carrier-sense medium access control (MAC) protocols such as the IEEE 802.11 distributed coordination function (DCF) avoid collisions by holding up pending packet transmission requests when a carrier signal is observed above a certain threshold. However, this often results in unnecessarily conservative communication, thus making it difficult to maximize the utilization of the spatial spectral resource. This paper shows that a higher aggregate throughput can be achieved by allowing more concurrent communications and adjusting the communication distance on the fly, which needs provisions for the following two areas. On the one hand, carrier sense-based MAC protocols do not allow aggressive communication attempts when they are within the carrier senseable area. On the other hand, the communication distance is generally neither short nor adjustable because multihop routing protocols strive for providing minimum hop paths. This paper proposes a new MAC algorithm, called multiple access with salvation army (MASA), which adopts less sensitive carrier sensing to promote more concurrent communications and adjusts the communication distance adaptively via packet salvaging at the MAC layer. Extensive simulation based on the ns-2 has shown MASA to outperform the DCF, particularly in terms of packet delay. We also discuss the implementation of MASA based on the DCF specification

Anales del XIII Congreso Argentino de Ciencias de la Computación (CACIC)

Contenido: Arquitecturas de computadoras Sistemas embebidos Arquitecturas orientadas a servicios (SOA) Redes de comunicaciones Redes heterogéneas Redes de Avanzada Redes inalámbricas Redes móviles Redes activas Administración y monitoreo de redes y servicios Calidad de Servicio (QoS, SLAs) Seguridad informática y autenticación, privacidad Infraestructura para firma digital y certificados digitales Análisis y detección de vulnerabilidades Sistemas operativos Sistemas P2P Middleware Infraestructura para grid Servicios de integración (Web Services o .Net)Red de Universidades con Carreras en Informática (RedUNCI