430 research outputs found
Downlink Training in Cell-Free Massive MIMO: A Blessing in Disguise
Cell-free Massive MIMO (multiple-input multiple-output) refers to a
distributed Massive MIMO system where all the access points (APs) cooperate to
coherently serve all the user equipments (UEs), suppress inter-cell
interference and mitigate the multiuser interference. Recent works demonstrated
that, unlike co-located Massive MIMO, the \textit{channel hardening} is, in
general, less pronounced in cell-free Massive MIMO, thus there is much to
benefit from estimating the downlink channel. In this study, we investigate the
gain introduced by the downlink beamforming training, extending the previously
proposed analysis to non-orthogonal uplink and downlink pilots. Assuming
single-antenna APs, conjugate beamforming and independent Rayleigh fading
channel, we derive a closed-form expression for the per-user achievable
downlink rate that addresses channel estimation errors and pilot contamination
both at the AP and UE side. The performance evaluation includes max-min
fairness power control, greedy pilot assignment methods, and a comparison
between achievable rates obtained from different capacity-bounding techniques.
Numerical results show that downlink beamforming training, although increases
pilot overhead and introduces additional pilot contamination, improves
significantly the achievable downlink rate. Even for large number of APs, it is
not fully efficient for the UE relying on the statistical channel state
information for data decoding.Comment: Published in IEEE Transactions on Wireless Communications on August
14, 2019. {\copyright} 2019 IEEE. Personal use of this material is permitted.
Permission from IEEE must be obtained for all other use
Ubiquitous Cell-Free Massive MIMO Communications
Since the first cellular networks were trialled in the 1970s, we have
witnessed an incredible wireless revolution. From 1G to 4G, the massive traffic
growth has been managed by a combination of wider bandwidths, refined radio
interfaces, and network densification, namely increasing the number of antennas
per site. Due its cost-efficiency, the latter has contributed the most. Massive
MIMO (multiple-input multiple-output) is a key 5G technology that uses massive
antenna arrays to provide a very high beamforming gain and spatially
multiplexing of users, and hence, increases the spectral and energy efficiency.
It constitutes a centralized solution to densify a network, and its performance
is limited by the inter-cell interference inherent in its cell-centric design.
Conversely, ubiquitous cell-free Massive MIMO refers to a distributed Massive
MIMO system implementing coherent user-centric transmission to overcome the
inter-cell interference limitation in cellular networks and provide additional
macro-diversity. These features, combined with the system scalability inherent
in the Massive MIMO design, distinguishes ubiquitous cell-free Massive MIMO
from prior coordinated distributed wireless systems. In this article, we
investigate the enormous potential of this promising technology while
addressing practical deployment issues to deal with the increased
back/front-hauling overhead deriving from the signal co-processing.Comment: Published in EURASIP Journal on Wireless Communications and
Networking on August 5, 201
Fundamental Limits in Correlated Fading MIMO Broadcast Channels: Benefits of Transmit Correlation Diversity
We investigate asymptotic capacity limits of the Gaussian MIMO broadcast
channel (BC) with spatially correlated fading to understand when and how much
transmit correlation helps the capacity. By imposing a structure on channel
covariances (equivalently, transmit correlations at the transmitter side) of
users, also referred to as \emph{transmit correlation diversity}, the impact of
transmit correlation on the power gain of MIMO BCs is characterized in several
regimes of system parameters, with a particular interest in the large-scale
array (or massive MIMO) regime. Taking the cost for downlink training into
account, we provide asymptotic capacity bounds of multiuser MIMO downlink
systems to see how transmit correlation diversity affects the system
multiplexing gain. We make use of the notion of joint spatial division and
multiplexing (JSDM) to derive the capacity bounds. It is advocated in this
paper that transmit correlation diversity may be of use to significantly
increase multiplexing gain as well as power gain in multiuser MIMO systems. In
particular, the new type of diversity in wireless communications is shown to
improve the system multiplexing gain up to by a factor of the number of degrees
of such diversity. Finally, performance limits of conventional large-scale MIMO
systems not exploiting transmit correlation are also characterized.Comment: 29 pages, 8 figure
Random Access Protocols for Massive MIMO
5G wireless networks are expected to support new services with stringent
requirements on data rates, latency and reliability. One novel feature is the
ability to serve a dense crowd of devices, calling for radically new ways of
accessing the network. This is the case in machine-type communications, but
also in urban environments and hotspots. In those use cases, the high number of
devices and the relatively short channel coherence interval do not allow
per-device allocation of orthogonal pilot sequences. This article motivates the
need for random access by the devices to pilot sequences used for channel
estimation, and shows that Massive MIMO is a main enabler to achieve fast
access with high data rates, and delay-tolerant access with different data rate
levels. Three pilot access protocols along with data transmission protocols are
described, fulfilling different requirements of 5G services
Massive MIMO for Internet of Things (IoT) Connectivity
Massive MIMO is considered to be one of the key technologies in the emerging
5G systems, but also a concept applicable to other wireless systems. Exploiting
the large number of degrees of freedom (DoFs) of massive MIMO essential for
achieving high spectral efficiency, high data rates and extreme spatial
multiplexing of densely distributed users. On the one hand, the benefits of
applying massive MIMO for broadband communication are well known and there has
been a large body of research on designing communication schemes to support
high rates. On the other hand, using massive MIMO for Internet-of-Things (IoT)
is still a developing topic, as IoT connectivity has requirements and
constraints that are significantly different from the broadband connections. In
this paper we investigate the applicability of massive MIMO to IoT
connectivity. Specifically, we treat the two generic types of IoT connections
envisioned in 5G: massive machine-type communication (mMTC) and ultra-reliable
low-latency communication (URLLC). This paper fills this important gap by
identifying the opportunities and challenges in exploiting massive MIMO for IoT
connectivity. We provide insights into the trade-offs that emerge when massive
MIMO is applied to mMTC or URLLC and present a number of suitable communication
schemes. The discussion continues to the questions of network slicing of the
wireless resources and the use of massive MIMO to simultaneously support IoT
connections with very heterogeneous requirements. The main conclusion is that
massive MIMO can bring benefits to the scenarios with IoT connectivity, but it
requires tight integration of the physical-layer techniques with the protocol
design.Comment: Submitted for publicatio
Recent Advances in Acquiring Channel State Information in Cellular MIMO Systems
In cellular multi-user multiple input multiple output (MU-MIMO) systems the quality of the available channel state information (CSI) has a large impact on the system performance. Specifically, reliable CSI at the transmitter is required to determine the appropriate modulation and coding scheme, transmit power and the precoder vector, while CSI at the receiver is needed to decode the received data symbols. Therefore, cellular MUMIMO systems employ predefined pilot sequences and configure associated time, frequency, code and power resources to facilitate the acquisition of high quality CSI for data transmission and reception. Although the trade-off between the resources used user data transmission has been known for long, the near-optimal configuration of the vailable system resources for pilot and data transmission is a topic of current research efforts. Indeed, since the fifth generation of cellular systems utilizes heterogeneous networks in which base stations are equipped with a large number of transmit and receive antennas, the appropriate configuration of pilot-data resources becomes a critical design aspect. In this article, we review recent advances in system design approaches that are designed for the acquisition of CSI and discuss some of the recent results that help to dimension the pilot and data resources specifically in cellular MU-MIMO systems
- …