Millimetriaaltopohjainen runkoyhteys ultratiheille langattomille verkoille - Itseasentuvien verkkoelementtien analyysi

The amount of wireless traffic and number of connected devices are expected to explode in the coming future. By the year 2020 the amount of data traffic is forecasted to grow 1000 times from 2010 levels and the amount of connected devices is expected to reach 50 billion. One reason to these numbers is massive increase in machine type communications. 5G networks have been envisioned to address these challenges. In the 5G network concept the networks are getting denser than ever before. Millimeter wave communications play an important role in backhauling of the mobile traffic as deploying optical fiber to every small node is most likely going to be too cost intensive for operators. Efficient deployment of an ultra-dense wireless network requires that the devices support so called “plug and play” installation. In practice it means that a mechanic installing a new radio node should only perform physical mounting of the device. Antenna alignment and link setup processes should be fully automated. The purpose of this thesis is to study practical issues and possible solutions of realizing the plug and play installation in a cost efficient way. This study will define scenarios and functional requirements of adding access nodes to backhaul networks. Technical evaluation of link discovery process and cost analysis on plug and play installation of access nodes are conducted.Tulevaisuudessa langattomien laitteiden määrän ja niiden generoiman liikenteen odotetaan kasvavan räjähdysmäisesti. Vuoteen 2020 mennessä verkoissa siirrettävien datamäärien on ennustettu kasvavan tuhatkertaisiksi vuoden 2010 tasosta, ja liitettyjen laitteiden määrän odotetaan nousevan 50 miljardiin. Yksi syy näihin on koneiden välisen viestinnän massiivinen kasvu. 5G-verkkoja on kaavailtu vastaamaan edellä mainittuihin haasteisiin. Osana 5G-konseptia verkkojen odotetaan rakentuvan tiheämmiksi kuin koskaan aiemmin. Millimetriaaltoihin pohjautuvat linkit tulevat olemaan merkittävässä roolissa mobiilidatan siirtämisessä radionoodeista runkoverkkoon, koska optisen kuidun rakentaminen jokaiselle pienelle noodille tulisi mitä luultavimmin operaattoreille liian kalliiksi. Ultratiheiden verkkojen tehokas rakentaminen vaatii, että asennettavat laitteet tukevan niin sanottua itseasennusta. Käytännössä se tarkoittaa sitä, että asentajan täytyy ainoastaan suorittaa radionoodin fyysinen asennus. Antenniensuuntaus- ja linkinmuodostusprosessien tulisi olla täysin automatisoituja. Tämän diplomityön tarkoituksena on tutkia kustannustehokkaaseen itseasennukseen liittyviä käytännön ongelmia sekä mahdollisia ratkaisuita. Tutkimus määrittelee skenaariot ja funktionaaliset vaatimukset radionoodien lisäämiseksi osaksi operaattorin verkkoa. Työ sisältää linkkienmuodostusprosessin teknisen evaluoinnin, sekä kustannusanalyysin tiheiden verkkojen rakentamisesta hyödyntäen itseasennustekniikkaa

Evaluating the effectiveness of Cooperative/Coordinated Multipoint (CoMP) LTE feature in uplink and downlink transmissions

Shannon demonstrated that the channel capacity depends of the ratio of the received signal power to interference plus noise power (SINR). Inter-cell interference caused by neighbouring base stations (BSs) has been identified as one of the most severe problem towards the deployment of LTE technology as it can significantly deteriorate the performance of cellside User Equipment (UE). However, because of regulatory and radiation restrictions as well as operational costs, signal power may only be increased only up to a certain limit to reduce the interference. The other common radio propagation impairment is multipath. Multipath refers to a scenario where multiple copies of a signal propagate to a receiver using different paths. The paths can be created due to signal reflection, scattering and diffraction. As will be discussed later the effects of multipath contribute little to intercell interference because multipath characteristics such as delay spread are compensated for using cyclic prefixes. In this work, we will limit our scope to interference as it has been identified as the main cause of performance degradation for cell edge users due to the full frequency reuse technique used in LTE. To mitigate interference 3GPP devised options of increasing the capacity in LTEAdvanced Release 12 which include the use of spectral aggregation, employing Multiple Input and Multiple Output (MIMO) Antenna techniques, deploying more base stations and micro and femto cells, increasing the degree of sectorisation and Coordinated Multipoint (CoMP). We are primarily interested in evaluating performance improvements introduced when uplink (UL) and downlink (DL) coordinated/cooperative multipoint (CoMP) is enabled in LTE Advanced Release 12 as a way of reducing interference among sites. The CoMP option of reducing interference does not require deployment of new equipment compared to the other options mentioned above hence network deployment costs are minimal. CoMP in theory is known to reduce interference especially for cell edge users and therefore improves network fairness. With CoMP, multiple points coordinate with each other such that transmission of signals to and from other points do not incur serious interference or the interference can even be exploited as a meaningful signal. In September 2011 work on specifications for CoMP support was started in 3GPP LTEAdvanced as one of the core features in LTE-Advanced Release 11 to improve cell edge user throughput as well as the average network throughput. We set to do field measurements in the evaluation of the effectiveness of CoMP in LTE. 3GPP LTE Release 12 was used and cell edge users' performance was the focus. The network operates in 2330 - 2350 MHz band (Channel 40). From the field measurements, it was demonstrated that the CoMP (Scenario 2) feature indeed effective in improving service quality/user experience/fairness for cell edge users. CoMP inherently improves network capacity. A seven (7) percent throughput was noticed

D 3. 3 Final performance results and consolidated view on the most promising multi -node/multi -antenna transmission technologies

This document provides the most recent updates on the technical contributions and research challenges focused in WP3. Each Technology Component (TeC) has been evaluated under possible uniform assessment framework of WP3 which is based on the simulation guidelines of WP6. The performance assessment is supported by the simulation results which are in their mature and stable state. An update on the Most Promising Technology Approaches (MPTAs) and their associated TeCs is the main focus of this document. Based on the input of all the TeCs in WP3, a consolidated view of WP3 on the role of multinode/multi-antenna transmission technologies in 5G systems has also been provided. This consolidated view is further supported in this document by the presentation of the impact of MPTAs on METIS scenarios and the addressed METIS goals.Aziz, D.; Baracca, P.; De Carvalho, E.; Fantini, R.; Rajatheva, N.; Popovski, P.; Sørensen, JH.... (2015). D 3. 3 Final performance results and consolidated view on the most promising multi -node/multi -antenna transmission technologies. http://hdl.handle.net/10251/7675

Optimization of Mobility Parameters using Fuzzy Logic and Reinforcement Learning in Self-Organizing Networks

In this thesis, several optimization techniques for next-generation wireless networks are proposed to solve different problems in the field of Self-Organizing Networks and heterogeneous networks. The common basis of these problems is that network parameters are automatically tuned to deal with the specific problem. As the set of network parameters is extremely large, this work mainly focuses on parameters involved in mobility management. In addition, the proposed self-tuning schemes are based on Fuzzy Logic Controllers (FLC), whose potential lies in the capability to express the knowledge in a similar way to the human perception and reasoning. In addition, in those cases in which a mathematical approach has been required to optimize the behavior of the FLC, the selected solution has been Reinforcement Learning, since this methodology is especially appropriate for learning from interaction, which becomes essential in complex systems such as wireless networks. Taking this into account, firstly, a new Mobility Load Balancing (MLB) scheme is proposed to solve persistent congestion problems in next-generation wireless networks, in particular, due to an uneven spatial traffic distribution, which typically leads to an inefficient usage of resources. A key feature of the proposed algorithm is that not only the parameters are optimized, but also the parameter tuning strategy. Secondly, a novel MLB algorithm for enterprise femtocells scenarios is proposed. Such scenarios are characterized by the lack of a thorough deployment of these low-cost nodes, meaning that a more efficient use of radio resources can be achieved by applying effective MLB schemes. As in the previous problem, the optimization of the self-tuning process is also studied in this case. Thirdly, a new self-tuning algorithm for Mobility Robustness Optimization (MRO) is proposed. This study includes the impact of context factors such as the system load and user speed, as well as a proposal for coordination between the designed MLB and MRO functions. Fourthly, a novel self-tuning algorithm for Traffic Steering (TS) in heterogeneous networks is proposed. The main features of the proposed algorithm are the flexibility to support different operator policies and the adaptation capability to network variations. Finally, with the aim of validating the proposed techniques, a dynamic system-level simulator for Long-Term Evolution (LTE) networks has been designed

D13.2 Techniques and performance analysis on energy- and bandwidth-efficient communications and networking

Deliverable D13.2 del projecte europeu NEWCOM#The report presents the status of the research work of the various Joint Research Activities (JRA) in WP1.3 and the results that were developed up to the second year of the project. For each activity there is a description, an illustration of the adherence to and relevance with the identified fundamental open issues, a short presentation of the main results, and a roadmap for the future joint research. In the Annex, for each JRA, the main technical details on specific scientific activities are described in detail.Peer ReviewedPostprint (published version

Device-to-device communications for 5G Radio Access Networks

Nowadays it is very popular to share video clips and images to one’s social network in the proximity. Direct device-to-device (D2D) communication is one of the means to respond to this requirement. D2D offers users improved end-to-end latency times, and additionally can provide higher data rates. At the same time the overall cellular network congestion decreases. D2D is also known as Proximity Services (ProSe). LTE is missing direct D2D communication. Currently D2D for 5G is standardised in the 3rd Generation Partnership Project (3GPP) Releases 12, and in parallel Mobile and wireless communications Enablers for the Twenty-twenty Information Society (METIS) project has D2D as one of its research topics. Multiple articles have been published about D2D communication. This thesis is a literature based thesis following D2D communication in 5G literature. The scope is to describe similarities and differences found in Technical Reports and Technical Specifications of the 3GPP Release 12, in deliverables written in METIS project and in some selected D2D related publications about D2D communications. 3GPP Release 12 concentrates on ProSe at least for public safety. ProSe communication out-of-coverage is only for public safety purposes. METIS provides multiple solutions for diverse D2D topics, for example, device discovery, radio resource management, mobility management and relaying. METIS provides solutions for D2D communication not yet mature enough for development and implementation but which might be realized in the future.Nykyisin on suosittua lähettää lyhyitä videoita tai kuvia läheisyydessä oleville ystäville. Laitteiden välinen suora kommunikointi eli D2D-viestintä tuo ratkaisun tähän vaatimukseen. D2D-viestinnän ansiosta viive lyhenee ja lisäksi siirtonopeudet kasvavat. Samaan aikaan koko verkon kuormitus vähenee. Suora kahden laitteen välinen kommunikointi puuttuu LTE:stä. Tällä hetkellä 3GPP Release 12 standardisoi suoraa kahden laitteen välistä kommunikointia. Samanaikaisesti Mobile and wireless communications Enablers for the Twenty-twenty Information Society (METIS) –projektin yhtenä tutkimuskohteenaan on kahden laitteen välinen suora kommunikointi, Lisäksi on lukuisia julkaisuja liittyen D2D-viestintään. Tämä diplomityö perustuu kirjallisuuteen. Sen tavoitteena on selvittää, miten kahden laitteen välistä suoraa kommunikointia on kuvattu 3GPP Release 12:ta teknisissä spesifikaatioissa, METIS-projektin julkaisuissa sekä muutamassa valitussa tieteellisessä julkaisussa. Tavoitteena on selvittää D2D-viestinnän yhtäläisyyksiä sekä poikkeamia. 3PGG Release 12 standardointi keskittyy D2D-viestinnän käyttöön ainakin julkisessa pelastustyössä. D2D-viestinnän tulee ainakin julkisessa pelastustyössä toimia myös siellä missä matkapuhelinverkko ei toimi tai sitä ei ole olemassa. METIS tarjoaa useita ratkaisuja D2D-viestinnän eri osa-alueille, esimerkiksi laitteiden tunnistamiseen, resurssien hallintaan, liikkuvuuden hallintaa ja viestien edelleen lähettämiseen. METIS-projekti on tuottanut D2D-viestinnän ratkaisuja, joiden toteuttaminen on järkevää ja mahdollista vasta tulevaisuudessa