Design a CPW antenna on rubber substrate for multiband applications

This paper presents a compact CPW monopole antenna on rubber substrate for multiband applications. The multi band applications (2.45 and 3.65 GHz) is achieved on this antenna design with better antenna performances. Specially this antenna focused on ISM band application meanwhile some of slots (S1, S2, S3) have been used and attained another frequency band at 3.65 GHz for WiMAX application. The achievement of the antenna outcomes from this design that the bandwidth of 520 MHz for first band, the second band was 76 MHz for WiMAX application and the radiation efficiency attained around 90%. Moreover, the realized gain was at 4.27 dBi which overcome the most of existing design on that field. CST microwave studio has been used for antenna simulation

Special oils for halal and safe cosmetics

Three types of non conventional oils were extracted, analyzed and tested for toxicity. Date palm kernel oil (DPKO), mango kernel oil (MKO) and Ramputan seed oil (RSO). Oil content for tow cultivars of dates Deglect Noor and Moshkan was 9.67% and 7.30%, respectively. The three varieties of mango were found to contain about 10% oil in average. The red yellow types of Ramputan were found to have 11 and 14% oil, respectively. The phenolic compounds in DPKO, MKO and RSO were 0.98, 0.88 and 0.78 mg/ml Gallic acid equivalent, respectively. Oils were analyzed for their fatty acid composition and they are rich in oleic acid C18:1 and showed the presence of (dodecanoic acid) lauric acid C12:0, which reported to appear some antimicrobial activities. All extracted oils, DPKO, MKO and RSO showed no toxic effect using prime shrimp bioassay. Since these oils are stable, melt at skin temperature, have good lubricity and are great source of essential fatty acids; they could be used as highly moisturizing, cleansing and nourishing oils because of high oleic acid content. They are ideal for use in such halal cosmetics such as Science, Engineering and Technology 75 skin care and massage, hair-care, soap and shampoo products

Technology 2003: Conference Proceedings from the Fourth National Technology Transfer Conference and Exposition, Volume 1

Proceedings from symposia of the Technology 2003 Conference and Exposition, December 7-9, I993, Anaheim, CA. Volume 1 features the Plenary Session and the Plenary Workshop, plus papers presented in Advanced Manufacturing, Biotechnology/Medical Technology, Environmental Technology, Materials Science, and Power and Energy

Acetylcholine esterase as a possible marker for the detection of halal way of slaughtering

Introduction: Different methods of slaughtering are being practiced because of differences in religious guidelines and environmental issues (use of electricity) or convenience of handling etc. Variation in methods of slaughtering results in different conditions namely, release of varying amount of blood and different degree of movement of its body parts prior to death. These issues are related to the release of neurotransmitter (NT) at the neuro-muscular junction (NMJ) eventually is subject to be released from the body through the blood flow. Experimental design: Muscle samples from chicken in small pieces were collected immediately after slaughtering. Slaughtering was carried out using sharp knife. Two different conditions pertaining to the Islamic guidelines of slaughtering were investigated. such as whether the neck was severed (S+) or not (S-) from the body during slaughtering and whether the animal just after slaughtering was released (R+) or not (R-). The level of acetylecholine esterase mRNA involved in the degradation of acetylecholine, a NT at NMJ was investigated by RT-PCR. Results: The level of acetylecholine esterase mRNA was not detected in the sample obtained from the chicken slaughtered following Islamic guidelines i.e., neck should not be severed and body should be released just after the slaughtering (R+S-). Conclusions: Level of acetylcholine or acetylcholine esterase can be used as a biomarker to identify if the slaughtering is performed following Islamic guidelines

Calophyllum canum : antibacterial and anticancer plant

Human have used plants as a source of medicine throughout the world since time immemorial. Today there are at least 120 distinct chemical substances derived from plants that are considered as important drugs currently in use in one or more countries in the world. In particular, 60% drugs currently in clinical use for treatment of cancer were found to be of natural origin. Calophyllum canum is a large tree which grows in South East Asia and which is popular for its timber. This plant belongs to the family Guttiferae; a family that boasts species which are rich in bioactive phytochemicals. Some species are believed to having medicinal values and are used against several diseases including anti-inflammatory, anti infectious, astringent and antipyretic. We have successfully isolated two compounds from the methanol extract of Calophyllum canum stembarks that active inhibit the growth of Staphylococcus aureus (ATCC 29213 and ATCC 25923). The cytotoxic study on the extracts revealed that the n-hexane extract had the strongest antiproliferation activity, followed by the methanol extract. n-hexane strongly inhibited the growth of TE1 and MCF7 cell lines. IC50 for n-hexane and methanol extract activity on the A549 cell line was found to be 27.96 μg/mL and 78.9 μg/mL respectively.The compounds (CE0 - CE5) isolated from ethyl acetate extract of C. canum are active to inhibit cell proliferation of human cervix adenocarcinoma cells

Remanufacturing and Advanced Machining Processes for New Materials and Components

"Remanufacturing and Advanced Machining Processes for Materials and Components presents current and emerging techniques for machining of new materials and restoration of components, as well as surface engineering methods aimed at prolonging the life of industrial systems. It examines contemporary machining processes for new materials, methods of protection and restoration of components, and smart machining processes. • Details a variety of advanced machining processes, new materials joining techniques, and methods to increase machining accuracy • Presents innovative methods for protection and restoration of components primarily from the perspective of remanufacturing and protective surface engineering • Discusses smart machining processes, including computer-integrated manufacturing and rapid prototyping, and smart materials • Provides a comprehensive summary of state-of-the-art in every section and a description of manufacturing methods • Describes the applications in recovery and enhancing purposes and identifies contemporary trends in industrial practice, emphasizing resource savings and performance prolongation for components and engineering systems The book is aimed at a range of readers, including graduate-level students, researchers, and engineers in mechanical, materials, and manufacturing engineering, especially those focused on resource savings, renovation, and failure prevention of components in engineering systems.

Remanufacturing and Advanced Machining Processes for New Materials and Components

Remanufacturing and Advanced Machining Processes for Materials and Components presents current and emerging techniques for machining of new materials and restoration of components, as well as surface engineering methods aimed at prolonging the life of industrial systems. It examines contemporary machining processes for new materials, methods of protection and restoration of components, and smart machining processes. • Details a variety of advanced machining processes, new materials joining techniques, and methods to increase machining accuracy • Presents innovative methods for protection and restoration of components primarily from the perspective of remanufacturing and protective surface engineering • Discusses smart machining processes, including computer-integrated manufacturing and rapid prototyping, and smart materials • Provides a comprehensive summary of state-of-the-art in every section and a description of manufacturing methods • Describes the applications in recovery and enhancing purposes and identifies contemporary trends in industrial practice, emphasizing resource savings and performance prolongation for components and engineering systems The book is aimed at a range of readers, including graduate-level students, researchers, and engineers in mechanical, materials, and manufacturing engineering, especially those focused on resource savings, renovation, and failure prevention of components in engineering systems

Remanufacturing and Advanced Machining Processes for New Materials and Components

"Remanufacturing and Advanced Machining Processes for Materials and Components presents current and emerging techniques for machining of new materials and restoration of components, as well as surface engineering methods aimed at prolonging the life of industrial systems. It examines contemporary machining processes for new materials, methods of protection and restoration of components, and smart machining processes. • Details a variety of advanced machining processes, new materials joining techniques, and methods to increase machining accuracy • Presents innovative methods for protection and restoration of components primarily from the perspective of remanufacturing and protective surface engineering • Discusses smart machining processes, including computer-integrated manufacturing and rapid prototyping, and smart materials • Provides a comprehensive summary of state-of-the-art in every section and a description of manufacturing methods • Describes the applications in recovery and enhancing purposes and identifies contemporary trends in industrial practice, emphasizing resource savings and performance prolongation for components and engineering systems The book is aimed at a range of readers, including graduate-level students, researchers, and engineers in mechanical, materials, and manufacturing engineering, especially those focused on resource savings, renovation, and failure prevention of components in engineering systems.

Remanufacturing and Advanced Machining Processes for New Materials and Components

Remanufacturing and Advanced Machining Processes for Materials and Components presents current and emerging techniques for machining of new materials and restoration of components, as well as surface engineering methods aimed at prolonging the life of industrial systems. It examines contemporary machining processes for new materials, methods of protection and restoration of components, and smart machining processes. • Details a variety of advanced machining processes, new materials joining techniques, and methods to increase machining accuracy • Presents innovative methods for protection and restoration of components primarily from the perspective of remanufacturing and protective surface engineering • Discusses smart machining processes, including computer-integrated manufacturing and rapid prototyping, and smart materials • Provides a comprehensive summary of state-of-the-art in every section and a description of manufacturing methods • Describes the applications in recovery and enhancing purposes and identifies contemporary trends in industrial practice, emphasizing resource savings and performance prolongation for components and engineering systems The book is aimed at a range of readers, including graduate-level students, researchers, and engineers in mechanical, materials, and manufacturing engineering, especially those focused on resource savings, renovation, and failure prevention of components in engineering systems

Proceedings of the 2018 Canadian Society for Mechanical Engineering (CSME) International Congress

Published proceedings of the 2018 Canadian Society for Mechanical Engineering (CSME) International Congress, hosted by York University, 27-30 May 2018