84 research outputs found
Electromechanical System Integration for a Powered Upper Extremity Orthosis
Wearable robotics for assistance and rehabilitation are not yet considered commercially mainstream products, and as a result have not yet seen advanced controls systems and interfaces. Consequently, the available technology is mostly adapted from systems used in parallel technologies, rather than custom applications intended for human use. This study concerns itself with the design and development of a custom control system for a 2-degree of freedom powered upper extremity orthosis capable of driving elbow flexion/extension 135º and humeral rotation 95º . The orthosis has been evaluated for use as both a long-term assistive technology device for persons with disabilities, and as a short-term rehabilitative tool for persons recovering injury. The target demographics for such a device vary in age, cognitive ability and physical function, thus requiring several input parameters requiring consideration. This study includes a full evaluation of the potential users of the device, as well as parameter considerations that are required during the design phase. The final control system is capable of driving each DOF independently or simultaneously, for a more realistic and natural coupled-motion, with proportional control by pulse-width modulation. The dual-axis joystick interface wirelessly transmits to the 1.21 pound control pack which houses a custom microcontroller-driven PCB and 1800 milliamp-hour lithium-ion rechargeable battery capable of delivering 4 hours of running time. Upon integration with the 2 DOF orthosis device, a user may complete full range of motion with up to 5 pounds in their hand in less than 7 seconds, providing full functionality to complete acts of daily living, thus improving quality of life
NASA Tech Briefs, October 1992
Topics covered include: Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication technology; Mathematics and Information Sciences; Life Sciences
NASA Tech Briefs, April 1994
Topics covered: Advanced Composites and Plastics; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery/Automation; Manufacturing/Fabrication; Mathematics and Information Sciences; Life Sciences; Books and Reports
A continuum robotic platform for endoscopic non-contact laser surgery: design, control, and preclinical evaluation
The application of laser technologies in surgical interventions has been accepted in the clinical
domain due to their atraumatic properties. In addition to manual application of fibre-guided
lasers with tissue contact, non-contact transoral laser microsurgery (TLM) of laryngeal tumours
has been prevailed in ENT surgery. However, TLM requires many years of surgical training
for tumour resection in order to preserve the function of adjacent organs and thus preserve the
patient’s quality of life. The positioning of the microscopic laser applicator outside the patient
can also impede a direct line-of-sight to the target area due to anatomical variability and limit
the working space. Further clinical challenges include positioning the laser focus on the tissue
surface, imaging, planning and performing laser ablation, and motion of the target area during
surgery. This dissertation aims to address the limitations of TLM through robotic approaches and
intraoperative assistance. Although a trend towards minimally invasive surgery is apparent, no
highly integrated platform for endoscopic delivery of focused laser radiation is available to date.
Likewise, there are no known devices that incorporate scene information from endoscopic imaging
into ablation planning and execution. For focusing of the laser beam close to the target tissue, this
work first presents miniaturised focusing optics that can be integrated into endoscopic systems.
Experimental trials characterise the optical properties and the ablation performance. A robotic
platform is realised for manipulation of the focusing optics. This is based on a variable-length
continuum manipulator. The latter enables movements of the endoscopic end effector in five
degrees of freedom with a mechatronic actuation unit. The kinematic modelling and control of the
robot are integrated into a modular framework that is evaluated experimentally. The manipulation
of focused laser radiation also requires precise adjustment of the focal position on the tissue. For
this purpose, visual, haptic and visual-haptic assistance functions are presented. These support
the operator during teleoperation to set an optimal working distance. Advantages of visual-haptic
assistance are demonstrated in a user study. The system performance and usability of the overall
robotic system are assessed in an additional user study. Analogous to a clinical scenario, the
subjects follow predefined target patterns with a laser spot. The mean positioning accuracy of the
spot is 0.5 mm. Finally, methods of image-guided robot control are introduced to automate laser
ablation. Experiments confirm a positive effect of proposed automation concepts on non-contact
laser surgery.Die Anwendung von Lasertechnologien in chirurgischen Interventionen hat sich aufgrund der atraumatischen Eigenschaften in der Klinik etabliert. Neben manueller Applikation von fasergeführten
Lasern mit Gewebekontakt hat sich die kontaktfreie transorale Lasermikrochirurgie (TLM) von
Tumoren des Larynx in der HNO-Chirurgie durchgesetzt. Die TLM erfordert zur Tumorresektion
jedoch ein langjähriges chirurgisches Training, um die Funktion der angrenzenden Organe zu
sichern und damit die Lebensqualität der Patienten zu erhalten. Die Positionierung des mikroskopis chen Laserapplikators außerhalb des Patienten kann zudem die direkte Sicht auf das Zielgebiet
durch anatomische Variabilität erschweren und den Arbeitsraum einschränken. Weitere klinische
Herausforderungen betreffen die Positionierung des Laserfokus auf der Gewebeoberfläche, die
Bildgebung, die Planung und Ausführung der Laserablation sowie intraoperative Bewegungen
des Zielgebietes. Die vorliegende Dissertation zielt darauf ab, die Limitierungen der TLM durch
robotische Ansätze und intraoperative Assistenz zu adressieren. Obwohl ein Trend zur minimal
invasiven Chirurgie besteht, sind bislang keine hochintegrierten Plattformen für die endoskopische
Applikation fokussierter Laserstrahlung verfügbar. Ebenfalls sind keine Systeme bekannt, die
Szeneninformationen aus der endoskopischen Bildgebung in die Ablationsplanung und -ausführung
einbeziehen. Für eine situsnahe Fokussierung des Laserstrahls wird in dieser Arbeit zunächst
eine miniaturisierte Fokussieroptik zur Integration in endoskopische Systeme vorgestellt. Experimentelle Versuche charakterisieren die optischen Eigenschaften und das Ablationsverhalten. Zur
Manipulation der Fokussieroptik wird eine robotische Plattform realisiert. Diese basiert auf einem
längenveränderlichen Kontinuumsmanipulator. Letzterer ermöglicht in Kombination mit einer
mechatronischen Aktuierungseinheit Bewegungen des Endoskopkopfes in fünf Freiheitsgraden.
Die kinematische Modellierung und Regelung des Systems werden in ein modulares Framework
eingebunden und evaluiert. Die Manipulation fokussierter Laserstrahlung erfordert zudem eine
präzise Anpassung der Fokuslage auf das Gewebe. Dafür werden visuelle, haptische und visuell haptische Assistenzfunktionen eingeführt. Diese unterstützen den Anwender bei Teleoperation
zur Einstellung eines optimalen Arbeitsabstandes. In einer Anwenderstudie werden Vorteile der
visuell-haptischen Assistenz nachgewiesen. Die Systemperformanz und Gebrauchstauglichkeit
des robotischen Gesamtsystems werden in einer weiteren Anwenderstudie untersucht. Analog zu
einem klinischen Einsatz verfolgen die Probanden mit einem Laserspot vorgegebene Sollpfade. Die
mittlere Positioniergenauigkeit des Spots beträgt dabei 0,5 mm. Zur Automatisierung der Ablation
werden abschließend Methoden der bildgestützten Regelung vorgestellt. Experimente bestätigen
einen positiven Effekt der Automationskonzepte für die kontaktfreie Laserchirurgie
NASA Tech Briefs, May 1998
Topics include: special coverage on advanced composites, plastics and metals, electronic components and circuits, electronic systems, physical sciences, computer software, mechanics, machinery/automation, manufacturing/fabrication book and reports, and a special section of Electronics Tech Briefs
NASA Tech Briefs, February 1997
Topics include: Test and Measurement; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery/Automation; Manufacturing/Fabrication; Mathematics and Information Sciences; Life Sciences; Books and Report
NASA Tech Briefs, February 1999
Topics: Test and Measurement; Electronic Components and Circuits; Electronic Systems; Materials; Computer Software; Mechanics; Machinery/Automation; Physical Sciences; Computers and Peripherals
NASA Tech Briefs, July 1996
Topics covered include: Mechanical Components; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery/Automation; Manufacturing/Fabrication; Mathematics and Information Sciences; Life Sciences; Books and Report
Advances in High-Speed Atomic Force Microscopy
High-speed atomic force microscopy (HS-AFM) is a scanning probe technique capable of recording processes at the nanometre scale in real time. By sequentially increasing the speed of individual microscope components, images of surfaces can be recorded at up to several images per second. We present a HS-AFM platform composed of custom¿built measurement head, controller and software, scanners and amplifiers that is shared with the community in an open¿hardware fashion.
A new scanner design combined with an advanced control system is shown. The simple addition of a secondary actuator to widely available tube scanners increases the scan speed by over an order of magnitude while allowing for a 130 ¿m × 130 ¿m wide field of view, which is not possible with traditional high¿speed scanner designs. Controllers beyond standard proportional-integral controllers are capable of significantly increasing imaging speed by anticipating resonances. Such filters are cumbersome to design with conventional methods. It is shown how convex optimization can be used to design optimal controllers with guaranteed stability for atomic force microscopy in an automated fashion.
By integrating two lasers into the small spot¿size optics of an AFM readout head we are able to use the first laser for detecting the deflection of the smallest, and thus fastest currently available high¿speed cantilevers, while using the second for photo¿thermal actuation. Using this instrument, we demonstrate multi¿frequency atomic force microscopy (MF-AFM) at previously not accessible frequencies of more than 20 MHz.
By employing the driving laser not for resonant excitation as is usual in dynamic AFM, a new imaging mode, photothermal off-resonance tapping (PORT) is presented. By repeatedly thermally bending the cantilever below it¿s resonant frequency, the surface is probed at a rapid rate. The resulting force is extracted from the deflection of the cantilever in time¿ domain at real time and used for feedback and image generation. The dynamic and static force contributions in both PORT and state of the art high-speed amplitude modulation atomic force microscopy (AM-AFM) are measured and analyzed in detail. It is shown that by decoupling the driving frequency from the resonant frequency the dynamic tip¿sample impact forces can be drastically reduced when compared to resonance based AFM modes.
SAS-6 is a centriolar scaffolding protein with a crucial role in the duplication of centrioles, which are the main microtubule organizing organelle of eukaryotic cells. Defects in centriole duplication are associated with cancer and microencephaly. To understand these defects, is therefore important to understand the kinetics of SAS-6. In¿vitro, SAS-6 polymerizes into rings of between eight and ten monomers. Using the new PORT mode we are able to study the dynamic assembly of SAS-6. It is shown how SAS-6 rings can not only assemble by canonical one-by-one addition, but can form as a fusion of larger, already assembled fragments.
Finally, it is shown how PORT can be used to observe fast processes of and on living cells. The adhesion and detachment of thrombocyte cells is studied. Membrane disruptive effects are shown on gram¿negative as well as gram¿positive bacteria
NASA Tech Briefs, December 1990
Topics: New Product Ideas; NASA TU Services; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences
- …