Toward Ultralight High Strength Structural Materials via Collapsed Carbon Nanotube Bonding

The growing commercial availability of carbon nanotube (CNT) macro-assemblies such as sheet and yarn is making their use in structural composite components increasingly feasible. However, the mechanical properties of these materials continue to trail those of state-of-the-art carbon fiber composites due to relatively weak inter-tube load transfer. Forming covalent links between adjacent CNTs promises to mitigate this problem, but it has proven difficult in practice to introduce them chemically within densified and aligned CNT materials due to their low permeability. To avoid this limitation, this work explores the combination of pulsed electrical current, temperature, and pressure to introduce inter-CNT bonds. Reactive molecular dynamics simulations identify the most probable locations, configurations, and conditions for inter-nanotube bonds to form. This process is shown to introduce covalent linkages within the CNT material that manifest as improved macroscale mechanical properties. The magnitude of this effect increases with increasing levels of prealignment of the CNT material, promising a new synthesis pathway to ultralight structural materials with specific strengths and stiffnesses exceeding 1 and 100 GPa/(g/cu.cm), respectively

Thermal characterization of plain and carbon nanotube reinforced syntactic foams

Syntactic foams are composite materials in which the matrix phase is reinforced with hollow particles called microballoons. They possess properties such as low moisture absorption, low thermal conductivity and high damage tolerance because of their compositions. Traditionally, syntactic foams are used for many high strength applications and as insulating materials. But for applications demanding better heat dissipation from syntactic foam, conductive filler materials need to be added while maintaining its property of low density. Carbon nanotubes although extremely conductive, have issues of agglomeration in the matrix. In this research, a new approach to the problem of dispersion of nanotubes was attempted by growing the nanotubes on the surface of glass microballoons. S22 glass microballoons with low density were used in this work. Chemical vapor deposition was used for growing nanotubes on the microballoons using nickel as a catalyst. Nickel coating on microballoons was obtained via an electroless plating process. Observations were made on the nickel coating and nanotube growth processes with the help of a Scanning Electron Microscope (SEM). Thickness of the catalyst layer, growth temperature, gas flow rates and the quality of palladium activation were found to be the determining steps for nanotube growth. Transmission Electron Microscopy (TEM) was used to characterize the growth of nanostructures. Multi-walled carbon nanotubes of 6 – 20 nm were grown in this research. The thermal conductivity of nanotube-grown syntactic foam was tested on a Flashline thermal analyzer utilizing a flash method. For comparison purposes, plain and nanotube-mixed syntactic foams were fabricated and tested for conductivity. The effect of amount of nanotube and microballoon on the conductivity of the material was studied. The conductivity increments were low due to thermal boundary resistance occurring at the interface of nanotubes and resin. Nanotube-grown foams increase the thermal conductivity of plain syntactic foam by 86%, as opposed to nanotube-mixed ones which showed lower conductivity values than plain syntactic foam. TEM images showed that the mixing method had nanotubes being highly agglomerated whereas the growing method was successful in creating a well dispersed network of nanotubes

Production of carbon nanotubes by PECVD and their applications to supercapacitors

Màster en Nanociència i NanotecnologiaPlasma enhanced chemical vapor deposition (PECVD) is a versatile technique to obtain vertically dense-aligned carbon nanotubes (CNTs) at lower temperatures than chemical vapor deposition (CVD). In this work, we used magnetron sputtering to deposit iron layer as a catalyst on silicon wafers. After that, radio frequency (rf) assisted PECVD reactor was used to grow CNTs. They were treated with water plasma and finally covered by MnO2 as dielectric layer in order to use CNTs as electrode for supercapacitors. Optimization of annealing time, reaction time and temperature, water plasma time and MnO2 deposition time were performed to find appropriate conditions to improve the characteristics of supercapacitors. SEM (Scanning Electron Microscopy), TEM (Transmission Electron Microscopy), AFM (Atomic Force Microscopy) and Raman spectroscopy were used to characterize obtained electrodes

A Mechanical Mass Sensor with Yoctogram Resolution

Nanoelectromechanical systems (NEMS) have generated considerable interest as inertial mass sensors. NEMS resonators have been used to weigh cells, biomolecules, and gas molecules, creating many new possibilities for biological and chemical analysis [1-4]. Recently, NEMS-based mass sensors have been employed as a new tool in surface science in order to study e.g. the phase transitions or the diffusion of adsorbed atoms on nanoscale objects [5-7]. A key point in all these experiments is the ability to resolve small masses. Here we report on mass sensing experiments with a resolution of 1.7 yg (1 yg = 10^-24 g), which corresponds to the mass of one proton, or one hydrogen atom. The resonator is made of a ~150 nm long carbon nanotube resonator vibrating at nearly 2 GHz. The unprecedented level of sensitivity allows us to detect adsorption events of naphthalene molecules (C10H8) and to measure the binding energy of a Xe atom on the nanotube surface (131 meV). These ultrasensitive nanotube resonators offer new opportunities for mass spectrometry, magnetometry, and adsorption experiments.Comment: submitted version of the manuscrip

Flow conveying and diagnosis with carbon nanotube arrays

Dense arrays of aligned carbon nanotubes are designed into strips, nanowicks, as a miniature wicking element for liquid delivery and potential microfluidic chemical analysis devices. Liquid wicks away along the nanowicks spontaneously. This delivery function of nanowicks enables novel fluid transport devices to run without any power input, moving parts or external pump. Flow around the opaque nanotubes can be detected either directly or indirectly. Direct signals of the flow come out of dyed liquid or from the liquid–air interface; indirect signals are detected through observing surface-tension-induced deformation and dislocation of the nanotubes. Here we show that flow progression around and inside nanowicks is sensitive to liquid properties. Different flow progression leaves different traces of liquid. These traces not only allow liquid diagnosis any time after sampling, but also enable analysis of flow at a nanoscale resolution with scanning electron microscopy

Aligned metal oxide nanotube arrays: key-aspects of anodic TiO2 nanotube formation and properties

Over the past ten years, self-aligned TiO2 nanotubes have attracted tremendous scientific and technological interest due to their anticipated impact on energy conversion, environment remediation and biocompatibility. In the present manuscript, we review fundamental principles that govern the self-organized initiation of anodic TiO2 nanotubes. We start with the fundamental question: Why is self-organization taking place? We illustrate the inherent key mechanistic aspects that lead to tube growth in various different morphologies, such as rippled-walled tubes, smooth tubes, stacks and bamboo-type tubes, and importantly the formation of double-walled TiO2 nanotubes versus single-walled tubes, and the drastic difference in their physical and chemical properties. We show how both double- and single-walled tube layers can be detached from the metallic substrate and exploited for the preparation of robust self-standing membranes. Finally, we show how by selecting the right growth approach to TiO2 nanotubes specific functional features can be significantly improved, e.g., an enhanced electron mobility, intrinsic doping, or crystallization into pure anatase at extremely high temperatures can be achieved. This in turn can be exploited in constructing high performance devices based on anodic TiO2 in a wide range of applications.Comment: from Nanoscale Horiz., 2016, Advance Articl