3,264 research outputs found
Incorporation of the influences of kinematics parameters and joints tilting for the calibration of serial robotic manipulators
Serial robotic manipulators are calibrated to improve and restore their accuracy and repeatability. Kinematics parameters calibration of a robot reduces difference between the model of a robot in the controller and its actual mechanism to improve accuracy. Kinematics parameter’s error identification in the standard kinematics calibration has been configuration independent which does not consider the influence of kinematics parameter on robot tool pose accuracy for a given configuration. This research analyses the configuration dependent influences of kinematics parameters error on pose accuracy of a robot. Based on the effect of kinematics parameters, errors in the kinematics parameters are identified. Another issue is that current kinematics calibration models do not incorporate the joints tilting as a result of joint clearance, backlash, and flexibility, which is critical to the accuracy of serial robotic manipulators, and therefore compromises a pose accuracy. To address this issue which has not been carefully considered in the literature, this research suggested an approach to model configuration dependent joint tilting and presents a novel approach to encapsulate them in the calibration of serial robotic manipulators. The joint tilting along with the kinematics errors are identified and compensated in the kinematics model of the robot. Both conventional and proposed calibration approach are tested experimentally, and the calibration results are investigated to demonstrate the effectiveness of this research. Finally, the improvement in the trajectory tracking accuracy of the robot has been validated with the help of proposed low-cost measurement set-up.Thesis (M.Phil.) (Research by Publication) -- University of Adelaide, School of Mechanical Engineering , 201
Volumetric error compensation for industrial robots and machine tools
“A more efficient and increasingly popular volumetric error compensation method for machine tools is to compute compensation tables in axis space with tool tip volumetric measurements. However, machine tools have high-order geometric errors and some workspace is not reachable by measurement devices, the compensation method suffers a curve-fitting challenge, overfitting measurements in measured space and losing accuracy around and out of the measured space. Paper I presents a novel method that aims to uniformly interpolate and extrapolate the compensation tables throughout the entire workspace. By using a uniform constraint to bound the tool tip error slopes, an optimal model with consistent compensation capability is constructed. In addition to machine tools, industrial robots, are also becoming popularly used in manufacturing field. However, typical robot volumetric error compensation methods only consider constant errors such as link length and assembly errors while neglecting complicated kinematic errors such as strain wave gearing and out of rotating plane errors. Paper II presents a high-order joint-dependent model which describes both simple and complicated robot kinematic errors. A laser tracker with advantages of rapid data collection and a self-oriented position retroreflector are used for data collection. The experimental results show that nearly 20% of the robot kinematic errors are joint-dependent which are successfully captured by the proposed method. Paper III continues using the high-order joint-dependent robot error model while utilizing a new retroreflector with the ability of measuring robot position and orientation information simultaneously. More than 60% of measurement time is saved. Both position and orientation accuracy are also further improved”--Abstract, page iv
Innovative mechanism to identify robot alignment in an automation system
Robotic applications are commonly used in industrial automation systems. Such systems are often comprised of a series of equipment, including robotic arms, conveyors, a workspace, and fixtures. While each piece of equipment may be calibrated with the highest precision, their alignment in relation to each other is an important issue in defining the accuracy of the system. Currently, a variety of complex automated and manual methods are used to align a robotic arm to a workspace. These methods often use either expensive equipment or are slow and skill-dependent.
This paper presents a novel low-cost method for aligning an industrial robot to its workcell at 6 degrees of freedom (DoF). The solution is new, simple and easy to use and intended for the SMEs dealing with low volume, high complexity automated systems. The proposed method uses three dial indicators mounted to a robot end effector and a fixed measurement cube, positioned on a workcell. The robot is pre-programmed for a procedure around the cube. The changes on the dial indicators are used to calculate the misalignment between the robot and the workcell. Despite simplicity of the design, the solution is supported with complex real-time mathematical calculations and proven to identify and eliminate misalignment up to 3mm and 5 degrees to an accuracy of 0.003mm and 0.002 degrees: much higher than the precision required for a conventional industrial robot.
In this article, the authors describe a proposed solution, validate the computation both theoretically and through a laboratory test rig and simulation
Volumetric error compensation for 5-axis machine tools
This work presents a geometric error compensation method for large 5-axis machine tools. The compensation method presented here uses tool tip measurements recorded throughout the axis space to construct a position-dependent geometric error model that can easily be used for error compensation. The measurements are taken using a laser tracker, permitting rapid error data gathering at most locations in the axis space. First two model types are compared for generating table-based error compensation and experimental results are presented. Table-based compensation is then extended to machine tool controller types with restrictions on the number or combination of compensation tables using an artificial intelligence method. The overall methodology is then extended to the integration of additional instruments. A particular strength of the proposed methodology is the simultaneous generation of a complete set of compensation tables that accurately captures complicated kinematic errors independent of whether they arise from expected and unexpected sources --Abstract, page iv
Recommended from our members
Development of a Robotic Positioning and Tracking System for a Research Laboratory
Measurement of residual stress using neutron or synchrotron diffraction relies on the accurate alignment of the sample in relation to the gauge volume of the instrument. Automatic sample alignment can be achieved using kinematic models of the positioning system provided the relevant kinematic parameters are known, or can be determined, to a suitable accuracy.
The main problem addressed in this thesis is improving the repeatability and accuracy of the sample positioning for the strain scanning, through the use of techniques from robotic calibration theory to generate kinematic models of both off-the-shelf and custom-built positioning systems. The approach is illustrated using a positioning system in use on the ENGIN-X instrument at the UK’s ISIS pulsed neutron source comprising a traditional XYZΩ table augmented with a triple axis manipulator. Accuracies better than 100microns were achieved for this compound system. Although discussed here in terms of sample positioning systems these methods are entirely applicable to other moving instrument components such as beam shaping jaws and detectors.
Several factors could lead to inaccurate positioning on a neutron or synchrotron diffractometer. It is therefore essential to validate the accuracy of positioning especially during experiments which require a high level of accuracy. In this thesis, a stereo camera system is developed to monitor the sample and other moving parts of the diffractometer. The camera metrology system is designed to measure the positions of retroreflective markers attached to any object that is being monitored. A fully automated camera calibration procedure is developed with an emphasis on accuracy. The potential accuracy of this system is demonstrated and problems that limit accuracy are discussed. It is anticipated that the camera system would be used to correct the positioning system when the error is minimal or notify the user of the error when it is significant
A framework for flexible integration in robotics and its applications for calibration and error compensation
Robotics has been considered as a viable automation solution for the aerospace industry to address manufacturing cost. Many of the existing robot systems augmented with guidance from a large volume metrology system have proved to meet the high dimensional accuracy requirements in aero-structure assembly. However, they have been mainly deployed as costly and dedicated systems, which might not be ideal for aerospace manufacturing having low production rate and long cycle time. The work described in this thesis is to provide technical solutions to improve the flexibility and cost-efficiency of such metrology-integrated robot systems.
To address the flexibility, a software framework that supports reconfigurable system integration is developed. The framework provides a design methodology to compose distributed software components which can be integrated dynamically at runtime. This provides the potential for the automation devices (robots, metrology, actuators etc.) controlled by these software components to be assembled on demand for various assembly applications.
To reduce the cost of deployment, this thesis proposes a two-stage error compensation scheme for industrial robots that requires only intermittent metrology input, thus allowing for one expensive metrology system to be used by a number of robots. Robot calibration is employed in the first stage to reduce the majority of robot inaccuracy then the metrology will correct the residual errors. In this work, a new calibration model for serial robots having a parallelogram linkage is developed that takes into account both geometric errors and joint deflections induced by link masses and weight of the end-effectors.
Experiments are conducted to evaluate the two pieces of work presented above. The proposed framework is adopted to create a distributed control system that implements calibration and error compensation for a large industrial robot having a parallelogram linkage. The control system is formed by hot-plugging the control applications of the robot and metrology used together. Experimental results show that the developed error model was able to improve the 3 positional accuracy of the loaded robot from several millimetres to less than one millimetre and reduce half of the time previously required to correct the errors by using only the metrology. The experiments also demonstrate the capability of sharing one metrology system to more than one robot
Autonomy Infused Teleoperation with Application to BCI Manipulation
Robot teleoperation systems face a common set of challenges including
latency, low-dimensional user commands, and asymmetric control inputs. User
control with Brain-Computer Interfaces (BCIs) exacerbates these problems
through especially noisy and erratic low-dimensional motion commands due to the
difficulty in decoding neural activity. We introduce a general framework to
address these challenges through a combination of computer vision, user intent
inference, and arbitration between the human input and autonomous control
schemes. Adjustable levels of assistance allow the system to balance the
operator's capabilities and feelings of comfort and control while compensating
for a task's difficulty. We present experimental results demonstrating
significant performance improvement using the shared-control assistance
framework on adapted rehabilitation benchmarks with two subjects implanted with
intracortical brain-computer interfaces controlling a seven degree-of-freedom
robotic manipulator as a prosthetic. Our results further indicate that shared
assistance mitigates perceived user difficulty and even enables successful
performance on previously infeasible tasks. We showcase the extensibility of
our architecture with applications to quality-of-life tasks such as opening a
door, pouring liquids from containers, and manipulation with novel objects in
densely cluttered environments
Modeling and Control of the Cooperative Automated Fiber Placement System
The Automated Fiber Placement (AFP) machines have brought significant improvement on composite manufacturing. However, the current AFP machines are designed for the manufacture of simple structures like shallow shells or tubes, and not capable of handling some applications with more complex shapes.
A cooperative AFP system is proposed to manufacture more complex composite components which pose high demand for trajectory planning than those by the current APF system. The system consists of a 6 degree-of-freedom (DOF) serial robot holding the fiber placement head, a 6-DOF revolute-spherical-spherical (RSS) parallel robot on which a 1-DOF mandrel holder is installed and an eye-to-hand photogrammetry sensor, i.e. C-track, to detect the poses of both end-effectors of parallel robot and serial robot.
Kinematic models of the parallel robot and the serial robot are built. The analysis of constraints and singularities is conducted for the cooperative AFP system. The definitions of the tool frames for the serial robot and the parallel robot are illustrated. Some kinematic parameters of the parallel robot are calibrated using the photogrammetry sensor.
Although, the cooperative AFP system increases the flexibility of composite manufacturing by adding more DOF, there might not be a feasible path for laying up the fiber in some cases due to the requirement of free from collisions and singularities. To meet the challenge, an innovative semi-offline trajectory synchronized algorithm is proposed to incorporate the on-line robot control in following the paths generated off-line especially when the generated paths are infeasible for the current multiple robots to realize. By adding correction to the path of the robots at the points where the collision and singularity occur, the fiber can be laid up continuously without interruption. The correction is calculated based on the pose tracking data of the parallel robot detected by the photogrammetry sensor on-line. Due to the flexibility of the 6-DOF parallel robot, the optimized offsets with varying movements are generated based on the different singularities and constraints. Experimental results demonstrate the successful avoidance of singularities and joint limits, and the designed cooperative AFP system can fulfill the movement needed for manufacturing a composite structure with Y-shape
- …