Low-Latency Hard Real-Time Communication over Switched Ethernet

With the upsurge in the demand for high-bandwidth networked real-time applications in cost-sensitive environments, a key issue is to take advantage of developments of commodity components that offer a multiple of the throughput of classical real-time solutions. It was the starting hypothesis of this dissertation that with fine grained traffic shaping as the only means of node cooperation, it should be possible to achieve lower guaranteed delays and higher bandwidth utilization than with traditional approaches, even though Switched Ethernet does not support policing in the switches as other network architectures do. This thesis presents the application of traffic shaping to Switched Ethernet and validates the hypothesis. It shows, both theoretically and practically, how commodity Switched Ethernet technology can be used for low-latency hard real-time communication, and what operating-system support is needed for an efficient implementation

Ethernet - a survey on its fields of application

During the last decades, Ethernet progressively became the most widely used local area networking (LAN) technology. Apart from LAN installations, Ethernet became also attractive for many other fields of application, ranging from industry to avionics, telecommunication, and multimedia. The expanded application of this technology is mainly due to its significant assets like reduced cost, backward-compatibility, flexibility, and expandability. However, this new trend raises some problems concerning the services of the protocol and the requirements for each application. Therefore, specific adaptations prove essential to integrate this communication technology in each field of application. Our primary objective is to show how Ethernet has been enhanced to comply with the specific requirements of several application fields, particularly in transport, embedded and multimedia contexts. The paper first describes the common Ethernet LAN technology and highlights its main features. It reviews the most important specific Ethernet versions with respect to each application field’s requirements. Finally, we compare these different fields of application and we particularly focus on the fundamental concepts and the quality of service capabilities of each proposal

Performance analysis of a Master/Slave switched Ethernet for military embedded applications

Current military communication network is a generation old and is no longer effective in meeting the emerging requirements imposed by the next generation military embedded applications. A new communication network based upon Full Duplex Switched Ethernet is proposed in this paper to overcome these limitations. To allow existing military subsystems to be easily supported by a Switched Ethernet network, our proposal consists in keeping their current centralized communication scheme by using an optimized master/slave transmission control on Switched Ethernet thanks to the Flexible Time Triggered (FTT) paradigm. Our main objective is to assess the performance of such a proposal and estimate the quality of service we can expect in terms of latency. Using the Network Calculus formalism, schedulability analysis are determined. These analysis are illustrated in the case of a realistic military embedded application extracted from a real military aircraft network, to highlight the proposal's ability to support the required time constrained communications

Real-time characteristics of switched ethernet for "1553B" -embedded applications : simulation and analysis

In our previous work , Full Duplex Switched Ethernet was put forward as an attractive candidate to replace the MIL-STD 1553B data bus, in next generation "1553B"-embedded applications. An analytic study was conducted, using the Network Calculus formalism, to evaluate the deterministic guarantees offered by our proposal. Obtained results showed the effectiveness of traffic shaping techniques, combined with priority handling mechanisms on Full Duplex Switched Ethernet in order to satisfy 1553B-like real-time constraints. In this paper, we extend this work by the use of simulation. This gives the possibility to capture additional characteristics of the proposed architecture with respect to the analytical study, which was basically used to evaluate worst cases and deterministic guarantees. Hence, to assess the real-time characteristics of our proposed interconnection technology, the results yielded by simulation are discussed and average latencies distributions are considered

Full duplex switched ethernet for next generation "1553B" -based applications

Over the last thirty years, the MIL-STD 1553B data bus has been used in many embedded systems, like aircrafts, ships, missiles and satellites. However, the increasing number and complexity of interconnected subsystems lead to emerging needs for more communication bandwidth. Therefore, a new interconnection system is needed to overcome the limitations of the MIL-STD 1553B data bus. Among several high speed networks, Full Duplex Switched Ethernet is put forward here as an attractive candidate to replace the MIL-STD 1553B data bus. However, the key argument against Switched Ethernet lies in its non-deterministic behavior that makes it inadequate to deliver hard timeconstrained communications. Hence, our primary objective in this paper is to achieve an accepted QoS level offered by Switched Ethernet, to support diverse "1553B"-based applications requirements. We evaluate the performance of traffic shaping techniques on Full Duplex Switched Ethernet with an adequate choice of service strategy in the switch, to guarantee the real-time constraints required by these specific 1553B-based applications. An analytic study is conducted, using the Network Calculus formalism, to evaluate the deterministic guarantees offered by our approach. Theoretical analysis are then investigated in the case of a realistic "1553B"-based application extracted from a real military aircraft network. The results herein show the ability of profiled Full Duplex Switched Ethernet to satisfy 1553B-like real-time constraints

Real-time communication over switched ethernet for military applications

Full-Duplex Switched Ethernet is a forecasted new technology for advanced military aircraft system interconnection. However, it was not originally developed to meet the requirements of real-time communications. Therefore, in this paper, we analyze traffic shaping and a priority handling approach over switched Ethernet to achieve reliable transmission with bounded delays that conform to the real-time constraints, required by military applications

Simulation of Mixed Critical In-vehicular Networks

Future automotive applications ranging from advanced driver assistance to autonomous driving will largely increase demands on in-vehicular networks. Data flows of high bandwidth or low latency requirements, but in particular many additional communication relations will introduce a new level of complexity to the in-car communication system. It is expected that future communication backbones which interconnect sensors and actuators with ECU in cars will be built on Ethernet technologies. However, signalling from different application domains demands for network services of tailored attributes, including real-time transmission protocols as defined in the TSN Ethernet extensions. These QoS constraints will increase network complexity even further. Event-based simulation is a key technology to master the challenges of an in-car network design. This chapter introduces the domain-specific aspects and simulation models for in-vehicular networks and presents an overview of the car-centric network design process. Starting from a domain specific description language, we cover the corresponding simulation models with their workflows and apply our approach to a related case study for an in-car network of a premium car

Centralized vs distributed communication scheme on switched ethernet for embedded military applications

Current military communication network is a generation old and is no longer effective in meeting the emerging requirements imposed by the future embedded military applications. Therefore, a new interconnection system is needed to overcome these limitations. Two new communication networks based upon Full Duplex Switched Ethernet are presented herein in this aim. The first one uses a distributed communication scheme where equipments can emit their data simultaneously, which clearly improves system’s throughput and flexibility. However, migrating all existing applications into a compliant form could be an expensive step. To avoid this process, the second proposal consists in keeping the current centralized communication scheme. Our objective is to assess and compare the real time guarantees that each proposal can offer. The paper includes the functional description of each proposed communication network and a military avionic application to highlight proposals ability to support the required time constrained communications