45 research outputs found

    A survey on hybrid beamforming techniques in 5G : architecture and system model perspectives

    Get PDF
    The increasing wireless data traffic demands have driven the need to explore suitable spectrum regions for meeting the projected requirements. In the light of this, millimeter wave (mmWave) communication has received considerable attention from the research community. Typically, in fifth generation (5G) wireless networks, mmWave massive multiple-input multiple-output (MIMO) communications is realized by the hybrid transceivers which combine high dimensional analog phase shifters and power amplifiers with lower-dimensional digital signal processing units. This hybrid beamforming design reduces the cost and power consumption which is aligned with an energy-efficient design vision of 5G. In this paper, we track the progress in hybrid beamforming for massive MIMO communications in the context of system models of the hybrid transceivers' structures, the digital and analog beamforming matrices with the possible antenna configuration scenarios and the hybrid beamforming in heterogeneous wireless networks. We extend the scope of the discussion by including resource management issues in hybrid beamforming. We explore the suitability of hybrid beamforming methods, both, existing and proposed till first quarter of 2017, and identify the exciting future challenges in this domain

    Multiuser MIMO techniques with feedback

    Get PDF
    Kooperative Antennenanlagen haben vor kurzem einen heißen Forschungsthema geworden, da Sie deutlich höhere spektrale Effizienz als herkömmliche zelluläre Systeme versprechen. Der Gewinn wird durch die Eliminierung von Inter-Zelle Störungen (ICI) durch Koordinierung der-Antenne Übertragungen erworben. Vor kurzem, verteilte Organisation Methoden vorgeschlagen. Eine der größten Herausforderungen für das Dezentrale kooperative Antennensystem ist Kanalschätzung für den Downlink Kanal besonders wenn FDD verwendet wird. Alle zugehörigen Basisstationen im genossenschaftlichen Bereich müssen die vollständige Kanal Informationen zu Wissen, die entsprechenden precoding Gewicht Matrix zu berechnen. Diese Information ist von mobilen Stationen übertragen werden Stationen mit Uplink Ressourcen zu stützen. Wird als mehrere Basisstationen und mehreren mobilen Stationen in kooperativen Antennensysteme und jede Basisstation und Mobilstation beteiligt sind, können mit mehreren Antennen ausgestattet sein, die Anzahl der Kanal Parameter wieder gefüttert werden erwartet, groß zu sein. In dieser Arbeit wird ein effizientes Feedback Techniken der downlink Kanal Informationen sind für die Multi-user Multiple Input Multiple Output Fall vorgeschlagen, der insbesondere auf verteilte kooperative Antennensysteme zielt. Zuerst wird ein Unterraum-basiertes Kanalquantisierungsverfahren vorgeschlagen, das ein vorbestimmtes Codebuch verwendet. Ein iterativer Codebuchentwurfsalgorithmus wird vorgeschlagen, der zu einem lokalen optimalen Codebuch konvergiert. Darüber hinaus werden Feedback-Overhead-Reduktionsverfahren entwickelt, die die zeitliche Korrelation des Kanals ausnutzen. Es wird gezeigt, dass das vorgeschlagene adaptive Codebuchverfahren in Verbindung mit einem Datenkomprimierungsschema eine Leistung nahe an dem perfekten Kanalfall erzielt, was viel weniger Rückkopplungsoverhead im Vergleich zu anderen Techniken erfordert. Das auf dem Unterraum basierende Kanalquantisierungsverfahren wird erweitert, indem mehrere Antennen auf der Senderseite und/oder auf der Empfängerseite eingeführt werden, und die Leistung eines Vorcodierungs- (/Decodierungs-) Schemas mit regulierter Blockdiagonalisierung (RBD) wurde untersucht. Es wird ein kosteneffizientes Decodierungsmatrixquantisierungsverfahren vorgeschlagen, dass eine komplexe Berechnung an der Mobilstation vermeiden kann, während es nur eine leichte Verschlechterung zeigt. Die Arbeit wird abgeschlossen, indem die vorgeschlagenen Feedback-Methoden hinsichtlich ihrer Leistung, ihres erforderlichen Feedback-Overheads und ihrer Rechenkomplexität verglichen werden.Cooperative antenna systems have recently become a hot research topic, as they promise significantly higher spectral efficiency than conventional cellular systems. The gain is acquired by eliminating inter-cell interference (ICI) through coordination of the base antenna transmissions. Recently, distributed organization methods have been suggested. One of the main challenges of the distributed cooperative antenna system is channel estimation for the downlink channel especially when FDD is used. All of the associated base stations in the cooperative area need to know the full channel state information to calculate the corresponding precoding weight matrix. This information has to be transferred from mobile stations to base stations by using uplink resources. As several base stations and several mobile stations are involved in cooperative antenna systems and each base station and mobile station may be equipped with multiple antennas, the number of channel state parameters to be fed back is expected to be big. In this thesis, efficient feedback techniques of the downlink channel state information are proposed for the multi-user multiple-input multiple-output case, targeting distributed cooperative antenna systems in particular. First, a subspace based channel quantization method is proposed which employs a predefined codebook. An iterative codebook design algorithm is proposed which converges to a local optimum codebook. Furthermore, feedback overhead reduction methods are devised exploiting temporal correlation of the channel. It is shown that the proposed adaptive codebook method in conjunction with a data compression scheme achieves a performance close to the perfect channel case, requiring much less feedback overhead compared with other techniques. The subspace based channel quantization method is extended by introducing multiple antennas at the transmitter side and/or at the receiver side and the performance of a regularized block diagonalization (RBD) precoding(/decoding) scheme has been investigated as well as a zero-forcing (ZF) precoding scheme. A cost-efficient decoding matrix quantization method is proposed which can avoid a complex computation at the mobile station while showing only a slight degradation. The thesis is concluded by comparing the proposed feedback methods in terms of their performance, their required feedback overhead, and their computational complexity. The techniques that are developed in this thesis can be useful and applicable for 5G, which is envisioned to support the high granularity/resolution codebook and its efficient deployment schemes. Keywords: MU-MIMO, COOPA, limited feedback, CSI, CQ, feedback overhead reduction, Givens rotatio

    Hybrid Beamforming via the Kronecker Decomposition for the Millimeter-Wave Massive MIMO Systems

    Get PDF
    Despite its promising performance gain, the realization of mmWave massive MIMO still faces several practical challenges. In particular, implementing massive MIMO in the digital domain requires hundreds of RF chains matching the number of antennas. Furthermore, designing these components to operate at the mmWave frequencies is challenging and costly. These motivated the recent development of hybrid-beamforming where MIMO processing is divided for separate implementation in the analog and digital domains, called the analog and digital beamforming, respectively. Analog beamforming using a phase array introduces uni-modulus constraints on the beamforming coefficients, rendering the conventional MIMO techniques unsuitable and call for new designs. In this paper, we present a systematic design framework for hybrid beamforming for multi-cell multiuser massive MIMO systems over mmWave channels characterized by sparse propagation paths. The framework relies on the decomposition of analog beamforming vectors and path observation vectors into Kronecker products of factors being uni-modulus vectors. Exploiting properties of Kronecker mixed products, different factors of the analog beamformer are designed for either nulling interference paths or coherently combining data paths. Furthermore, a channel estimation scheme is designed for enabling the proposed hybrid beamforming. The scheme estimates the AoA of data and interference paths by analog beam scanning and data-path gains by analog beam steering. The performance of the channel estimation scheme is analyzed. In particular, the AoA spectrum resulting from beam scanning, which displays the magnitude distribution of paths over the AoA range, is derived in closed-form. It is shown that the inter-cell interference level diminishes inversely with the array size, the square root of pilot sequence length and the spatial separation between paths.Comment: Submitted to IEEE JSAC Special Issue on Millimeter Wave Communications for Future Mobile Networks, minor revisio

    Técnicas de equalização híbridas para sistemas heterogéneos na banda das ondas milimétricas

    Get PDF
    With the constant demand for better service and higher transmission rates current technologies are reaching the limits of the channel capacity. Although, technologies such as MIMO and Heterogeneous systems appear to increase the channel capacity by introducing more antennas at the transceivers making the link between users and base station more reliable. Furthermore, the current spectrum, sub-6GHz, is becoming saturated and due to the properties of such frequencies the deployment of heterogeneous systems can introduce some levels of interference. Towards improving future communication systems a new part of the frequencies spectrum available should be used, researchers have their eyes on the mmWave band. This band allows to increase the carrier frequency and respective signal bandwidth and therefore increase the transmission speeds, moreover the properties of such frequencies unlock some advantages over the frequencies used in the sub-6G band. Additionally, mmWave band can be combined with massive MIMO technology to enhance the system capacity and to deploy more antenna elements in the transceivers. One more key technology that improves the energy efficiency in systems with hundreds of antenna elements is the possibility to combine analog and digital precoding techniques denoted as hybrid architectures. The main advantages of such techniques is that contrary to the full digital precoding processing used in current systems this new architecture allows to reduce the number of RF chains per antenna leading to improved energy efficiency. Furthermore to handle heterogeneous systems that have small-cells within the macro-cell, techniques such as Interference Alignment (IA) can be used to efficiently remove the existing multi-tier interference. In this dissertation a massive MIMO mmWave heterogeneous system is implemented and evaluated. It is designed analog-digital equalizers to efficiently remove both the intra an inter-tier interference. At digital level, an interference alignment technique is used to remove the interference and increase the spectral efficiency. The results showed that the proposed solutions are efficient to remove the macro and small cells interference.Com a constante procura de melhores serviços e taxas de transmissão mais elevadas, as tecnologias atuais estão a atingir os limites de capacidade do canal. Contudo tecnologias como o MIMO e os sistemas heterogéneos permitem aumentar a capacidade do canal através da introdução de mais antenas nos transcetores e através da implementação de pequenos pontos de acesso espalhados pela célula primária, com o intuito de tornar as ligações entre os utilizadores e a estação base mais fiáveis. Tendo também em atenção que o espectro atual, sub-6GHz, está sobrecarregado e que devido às propriedades das frequências utilizadas a implementação de sistemas heterogéneos pode levar a níveis de interferência insustentáveis. Por modo a resolver esta sobrecarga futuros sistemas de comunicação devem aproveitar uma maior parte do espectro de frequências disponível. A banda das ondas milimétricas (mmWave) tem sido apontada como solução, o que permite aumentar a frequência utilizada para transportar o sinal e consequentemente aumentar as velocidades de transmissão. Uma outra vantagem da banda mmWave é que pode ser combinada com a tecnologia MIMO massivo, permitindo implementar mais elementos de antena nos terminais e consequentemente aumentar a capacidade do sistema. Umas das tecnologias desenvolvida para melhorar a eficiência energética em sistemas com centenas de antenas é a possibilidade de combinar técnicas de codificação analógica e digital, designadas como arquiteturas híbridas. A principal vantagem desta técnica é que, contrariamente ao processamento feito nos sistemas atuais, totalmente no domínio digital, esta nova arquitetura permite reduzir o número de cadeias RF por antena. Com o intuito de reduzir a interferência em sistemas heterogéneos, técnicas como o alinhamento de interferência são usadas para separar utilizadores das células secundárias dos utilizadores das células primárias de modo a reduzir a interferência multi-nível existente no sistema geral. Nesta dissertação, é implementado e avaliado um sistema heterogéneo que combina MIMO massivo e ondas milimétricas. Este sistema é projetado com equalizadores analógico-digitais para remover com eficiência a interferência intra e inter-camadas. No domínio digital é utilizada a técnica de alinhamento de interferência para remover a interferência e aumentar a eficiência espectral. Os resultados mostram que as soluções propostas são eficientes para remover a interferência entre as células secundárias e a primária.Mestrado em Engenharia Eletrónica e Telecomunicaçõe

    Limited Feedback Techniques in Multiple Antenna Wireless Communication Systems

    No full text
    Multiple antenna systems provide spatial multiplexing and diversity benefits.These systems also offer beamforming and interference mitigation capabilities in single-user (SU) and multi-user (MU) scenarios, respectively. Although diversity can be achieved without channel state information (CSI) at the transmitter using space-time codes, the knowledge of instantaneous CSI at the transmitter is essential to the above mentioned gains. In frequency division duplexing (FDD) systems, limited feedback techniques are employed to obtain CSI at the transmitter from the receiver using a low-rate link. As a consequence, CSI acquired by the transmitter in such manner have errors due to channel estimation and codebook quantization at the receiver, resulting in performance degradation of multi-antenna systems. In this thesis, we examine CSI inaccuracies due to codebook quantization errors and investigate several other aspects of limited feedback in SU, MU and multicell wireless communication systems with various channel models. For SU multiple-input multiple-output (MIMO) systems, we examine the capacity loss using standard codebooks. In particular, we consider single-stream and two-stream MIMO transmissions and derive capacity loss expressions in terms of minimum squared chordal distance for various MIMO receivers. Through simulations, we investigate the impact of codebook quantization errors on the capacity performance in uncorrelated Rayleigh, spatially correlated Rayleigh and standardized MIMO channels. This work motivates the need of effective codebook design to reduce the codebook quantization errors in correlated channels. Subsequently, we explore the improvements in the design of codebooks in temporally and spatially correlated channels for MU multiple-input single-output (MISO) systems, by employing scaling and rotation techniques. These codebooks quantize instantaneous channel direction information (CDI) and are referred as differential codebooks in the thesis. We also propose various adaptive scaling techniques for differential codebooks where packing density of codewords in the differential codebook are altered according to the channel condition, in order to reduce the quantization errors. The proposed differential codebooks improve the spectral efficiency of the system by minimizing the codebook quantization errors in spatially and temporally correlated channels. Later, we broaden the scope to massive MISO systems and propose trellis coded quantization (TCQ) schemes to quantize CDI. Unlike conventional codebook approach, the TCQ scheme does not require exhaustive search to select an appropriate codeword, thus reducing computational complexity and memory requirement at the receiver. The proposed TCQ schemes yield significant performance improvements compared to the existing TCQ based limited feedback schemes in both temporally and spatially correlated channels. Finally, we investigate interference coordination for multicell MU MISO systems using regularized zero-forcing (RZF) precoding. We consider random vector quantization (RVQ) codebooks and uncorrelated Rayleigh channels. We derive expected SINR approximations for perfect CDI and RVQ codebook-based CDI. We also propose an adaptive bit allocation scheme which aims to minimize the network interference and moreover, improves the spectral efficiency compared to equal bit allocation and coordinated zero-forcing (ZF) based adaptive bit allocation schemes

    Millimeter Wave Hybrid Beamforming Systems

    Get PDF

    Técnicas de quantização para sistemas de comunicação híbridos na banda de ondas milimétricas com um número elevado de antenas

    Get PDF
    Since the appearance of mobile communications, the users of this technology have been growing exponentially every day. The escalating mobile traffic growth it has been imposed by the proliferation of smartphones and tablets. The increasing and more intensive use of wireless communications may lead to a future breaking point, where the traditional systems will fail to support the required capability, spectral and energy efficiency. On the other hand, to cover all this current need to have more and more data it is necessary to provide a new range of data rates around the gigabits per second. Today, almost all mobile communications systems use spectrum in the range of 300MHz – 3GHz. It is needed to start looking to the range of 3GHz – 300GHz spectrum for mobile broadband applications. Millimeter waves are one way to alleviate the spectrum gridlock at lower frequencies. MIMO based systems has been researched for the last 20 years and are now part of the current standards. However, to achieve more gains, a grander view of the MIMO concept envisions the use of a large scale of antennas at each base stations, a concept referred as massive MIMO. The symbiotic combination of these technologies and other ones will lead to the development of a new generation system known as the 5G. The knowledge of the channel state information at the transmitter is very important in real massive MIMO millimeter wave systems. In this dissertation a limited feedback strategy for a hybrid massive MIMO OFDM system is proposed, where only a part of the parameters associated to the link channel are quantized and fed back. The limited feedback strategy employs a uniform-based quantization for channel amplitudes, angle of departure and angle of arrival in time domain. After being fed back, this information is used to reconstruct the overall channel in frequency domain and the transmit antenna array, which are then used to compute the hybrid analog-digital precoders. Numerical results show that the proposed quantization strategy achieve a performance close to the one obtained with perfect full channel, with a low overhead and complexityDesde o aparecimento das comunicações móveis, os utilizadores desta tecnologia têm vindo a crescer exponencialmente todos os dias. A escalada do crescimento do tráfego móvel foi imposta, principalmente, pela proliferação de smartphones e tablets. O uso crescente e intensivo das comunicações sem fios pode levar no futuro a um ponto de rutura, onde os sistemas tradicionais não suportam a capacidade requerida, a eficiência espectral e eficiência enérgica. Por outro lado, para cobrir toda esta necessidade atual de ter mais e mais dados, é necessário fornecer taxas de transmissão mais elevadas, em torno dos gigabits por segundo. Hoje, quase todos os sistemas de comunicações móveis usam espectro na faixa de 300 MHz - 3GHz. É necessário começar a procurar a gama de espectro 3GHz - 300 GHz para aplicações de banda larga móvel. Aqui vamos apresentar as ondas milimétricas, sendo esta uma maneira de aliviar espectro em frequências mais baixas. Os sistemas baseados em MIMO foram alvo de pesquisa nos últimos 20 anos e agora fazem parte dos padrões atuais. No entanto, para obter mais ganhos, uma visão mais ampla do conceito MIMO prevê o uso de uma grande quantidade de antenas em cada estação base, um conceito referido como massive MIMO. A combinação simbiótica destas tecnologias levará ao desenvolvimento de um novo sistema de geração denominado 5G. O desenvolvimento de técnicas de conhecimento da informação do canal no transmissor é muito importante em sistemas massive MIMO millimeter wave reais. Nesta dissertação é proposta e avaliada uma estratégia de envio de informação de canal para o transmissor para sistemas massive MIMO OFDM híbrido, onde apenas uma parte dos parâmetros associados ao canal são quantificados e transmitidos para o transmissor. A estratégia de feedback proposta é baseada numa quantização uniforme das amplitudes de canal, ângulos de partida e de chegada, no domínio do tempo. Depois de serem enviadas, essas informações são usadas para reconstruir o canal geral no domínio da frequência e a matriz da antena de transmissão, que são então usadas para obter os precoders híbridos analógico-digitais. Os resultados numéricos mostram que a estratégia de quantificação proposta atinge um desempenho próximo ao obtido caso se conhecesse o canal perfeito no transmissor, com um baixo overhead e complexidadeMestrado em Engenharia Eletrónica e Telecomunicaçõe

    D 3. 3 Final performance results and consolidated view on the most promising multi -node/multi -antenna transmission technologies

    Full text link
    This document provides the most recent updates on the technical contributions and research challenges focused in WP3. Each Technology Component (TeC) has been evaluated under possible uniform assessment framework of WP3 which is based on the simulation guidelines of WP6. The performance assessment is supported by the simulation results which are in their mature and stable state. An update on the Most Promising Technology Approaches (MPTAs) and their associated TeCs is the main focus of this document. Based on the input of all the TeCs in WP3, a consolidated view of WP3 on the role of multinode/multi-antenna transmission technologies in 5G systems has also been provided. This consolidated view is further supported in this document by the presentation of the impact of MPTAs on METIS scenarios and the addressed METIS goals.Aziz, D.; Baracca, P.; De Carvalho, E.; Fantini, R.; Rajatheva, N.; Popovski, P.; Sørensen, JH.... (2015). D 3. 3 Final performance results and consolidated view on the most promising multi -node/multi -antenna transmission technologies. http://hdl.handle.net/10251/7675
    corecore