Adiabatic Approach for Low-Power Passive Near Field Communication Systems

This thesis tackles the need of ultra-low power electronics in the power limited passive Near Field Communication (NFC) systems. One of the techniques that has proven the potential of delivering low power operation is the Adiabatic Logic Technique. However, the low power benefits of the adiabatic circuits come with the challenges due to the absence of single opinion on the most energy efficient adiabatic logic family which constitute appropriate trade-offs between computation time, area and complexity based on the circuit and the power-clocking schemes. Therefore, five energy efficient adiabatic logic families working in single-phase, 2-phase and 4-phase power-clocking schemes were chosen. Since flip-flops are the basic building blocks of any sequential circuit and the existing flip-flops are MUX-based (having more transistors) design, therefore a novel single-phase, 2-phase and 4-phase reset based flip-flops were proposed. The performance of the multi-phase adiabatic families was evaluated and compared based on the design examples such as 2-bit ring counter, 3-bit Up-Down counter and 16-bit Cyclic Redundancy Check (CRC) circuit (benchmark circuit) based on ISO 14443-3A standard. Several trade-offs, design rules, and an appropriate range for the supply voltage scaling for multi-phase adiabatic logic are proposed. Furthermore, based on the NFC standard (ISO 14443-3A), data is frequently encoded using Manchester coding technique before transmitting it to the reader. Therefore, if Manchester encoding can be implemented using adiabatic logic technique, energy benefits are expected. However, adiabatic implementation of Manchester encoding presents a challenge. Therefore, a novel method for implementing Manchester encoding using adiabatic logic is proposed overcoming the challenges arising due to the AC power-clock. Other challenges that come with the dynamic nature of the adiabatic gates and the complexity of the 4-phase power-clocking scheme is in synchronizing the power-clock v phases and the time spent in designing, validation and debugging of errors. This requires a specific modelling approach to describe the adiabatic logic behaviour at the higher level of abstraction. However, describing adiabatic logic behaviour using Hardware Description Languages (HDLs) is a challenging problem due to the requirement of modelling the AC power-clock and the dual-rail inputs and outputs. Therefore, a VHDL-based modelling approach for the 4-phase adiabatic logic technique is developed for functional simulation, precise timing analysis and as an improvement over the previously described approaches

Performance Comparison of Static CMOS and Domino Logic Style in VLSI Design: A Review

Of late, there is a steep rise in the usage of handheld gadgets and high speed applications. VLSI designers often choose static CMOS logic style for low power applications. This logic style provides low power dissipation and is free from signal noise integrity issues. However, designs based on this logic style often are slow and cannot be used in high performance circuits. On the other hand designs based on Domino logic style yield high performance and occupy less area. Yet, they have more power dissipation compared to their static CMOS counterparts. As a practice, designers during circuit synthesis, mix more than one logic style judiciously to obtain the advantages of each logic style. Carefully designing a mixed static Domino CMOS circuit can tap the advantages of both static and Domino logic styles overcoming their own short comings

Asynchrobatic logic for low-power VLSI design

In this work, Asynchrobatic Logic is presented. It is a novel low-power design style that combines the energy saving benefits of asynchronous logic and adiabatic logic to produce systems whose power dissipation is reduced in several different ways. The term “Asynchrobatic” is a new word that can be used to describe these types of systems, and is derived from the concatenation and shortening of Asynchronous, Adiabatic Logic. This thesis introduces the concept and theory behind Asynchrobatic Logic. It first provides an introductory background to both underlying parent technologies (asynchronous logic and adiabatic logic). The background material continues with an explanation of a number of possible methods for designing complex data-path cells used in the adiabatic data-path. Asynchrobatic Logic is then introduced as a comparison between asynchronous and Asynchrobatic buffer chains, showing that for wide systems, it operates more efficiently. Two more-complex sub-systems are presented, firstly a layout implementation of the substitution boxes from the Twofish encryption algorithm, and secondly a front-end only (without parasitic capacitances, resistances) simulation that demonstrates a functional system capable of calculating the Greatest Common Denominator (GCD) of a pair of 16-bit unsigned integers, which under typical conditions on a 0.35μm process, executed a test vector requiring twenty-four iterations in 2.067μs with a power consumption of 3.257nW. These examples show that the concept of Asynchrobatic Logic has the potential to be used in real-world applications, and is not just theory without application. At the time of its first publication in 2004, Asynchrobatic Logic was both unique and ground-breaking, as this was the first time that consideration had been given to operating large-scale adiabatic logic in an asynchronous fashion, and the first time that Asynchronous Stepwise Charging (ASWC) had been used to drive an adiabatic data-path

Energy-Efficient Neural Network Architectures

Emerging systems for artificial intelligence (AI) are expected to rely on deep neural networks (DNNs) to achieve high accuracy for a broad variety of applications, including computer vision, robotics, and speech recognition. Due to the rapid growth of network size and depth, however, DNNs typically result in high computational costs and introduce considerable power and performance overheads. Dedicated chip architectures that implement DNNs with high energy efficiency are essential for adding intelligence to interactive edge devices, enabling them to complete increasingly sophisticated tasks by extending battery lie. They are also vital for improving performance in cloud servers that support demanding AI computations. This dissertation focuses on architectures and circuit technologies for designing energy-efficient neural network accelerators. First, a deep-learning processor is presented for achieving ultra-low power operation. Using a heterogeneous architecture that includes a low-power always-on front-end and a selectively-enabled high-performance back-end, the processor dynamically adjusts computational resources at runtime to support conditional execution in neural networks and meet performance targets with increased energy efficiency. Featuring a reconfigurable datapath and a memory architecture optimized for energy efficiency, the processor supports multilevel dynamic activation of neural network segments, performing object detection tasks with 5.3x lower energy consumption in comparison with a static execution baseline. Fabricated in 40nm CMOS, the processor test-chip dissipates 0.23mW at 5.3 fps. It demonstrates energy scalability up to 28.6 TOPS/W and can be configured to run a variety of workloads, including severely power-constrained ones such as always-on monitoring in mobile applications. To further improve the energy efficiency of the proposed heterogeneous architecture, a new charge-recovery logic family, called zero-short-circuit current (ZSCC) logic, is proposed to decrease the power consumption of the always-on front-end. By relying on dedicated circuit topologies and a four-phase clocking scheme, ZSCC operates with significantly reduced short-circuit currents, realizing order-of-magnitude power savings at relatively low clock frequencies (in the order of a few MHz). The efficiency and applicability of ZSCC is demonstrated through an ANSI S1.11 1/3 octave filter bank chip for binaural hearing aids with two microphones per ear. Fabricated in a 65nm CMOS process, this charge-recovery chip consumes 13.8µW with a 1.75MHz clock frequency, achieving 9.7x power reduction per input in comparison with a 40nm monophonic single-input chip that represents the published state of the art. The ability of ZSCC to further increase the energy efficiency of the heterogeneous neural network architecture is demonstrated through the design and evaluation of a ZSCC-based front-end. Simulation results show 17x power reduction compared with a conventional static CMOS implementation of the same architecture.PHDElectrical and Computer EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/147614/1/hsiwu_1.pd

Scalable Energy-Recovery Architectures.

Energy efficiency is a critical challenge for today's integrated circuits, especially for high-end digital signal processing and communications that require both high throughput and low energy dissipation for extended battery life. Charge-recovery logic recovers and reuses charge using inductive elements and has the potential to achieve order-of-magnitude improvement in energy efficiency while maintaining high performance. However, the lack of large-scale high-speed silicon demonstrations and inductor area overheads are two major concerns. This dissertation focuses on scalable charge-recovery designs. We present a semi-automated design flow to enable the design of large-scale charge-recovery chips. We also present a new architecture that uses in-package inductors, eliminating the area overheads caused by the use of integrated inductors in high-performance charge-recovery chips. To demonstrate our semi-automated flow, which uses custom-designed standard-cell-like dynamic cells, we have designed a 576-bit charge-recovery low-density parity-check (LDPC) decoder chip. Functioning correctly at clock speeds above 1 GHz, this prototype is the first-ever demonstration of a GHz-speed charge-recovery chip of significant complexity. In terms of energy consumption, this chip improves over recent state-of-the-art LDPCs by at least 1.3 times with comparable or better area efficiency. To demonstrate our architecture for eliminating inductor overheads, we have designed a charge-recovery LDPC decoder chip with in-package inductors. This test-chip has been fabricated in a 65nm CMOS flip-chip process. A custom 6-layer FC-BGA package substrate has been designed with 16 inductors embedded in the fifth layer of the package substrate, yielding higher Q and significantly improving area efficiency and energy efficiency compared to their on-chip counterparts. From measurements, this chip achieves at least 2.3 times lower energy consumption with better area efficiency over state-of-the-art published designs.PhDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/116653/1/terryou_1.pd

ENERGY-EFFICIENT AND SECURE HARDWARE FOR INTERNET OF THINGS (IoT) DEVICES

Internet of Things (IoT) is a network of devices that are connected through the Internet to exchange the data for intelligent applications. Though IoT devices provide several advantages to improve the quality of life, they also present challenges related to security. The security issues related to IoT devices include leakage of information through Differential Power Analysis (DPA) based side channel attacks, authentication, piracy, etc. DPA is a type of side-channel attack where the attacker monitors the power consumption of the device to guess the secret key stored in it. There are several countermeasures to overcome DPA attacks. However, most of the existing countermeasures consume high power which makes them not suitable to implement in power constraint devices. IoT devices are battery operated, hence it is important to investigate the methods to design energy-efficient and secure IoT devices not susceptible to DPA attacks. In this research, we have explored the usefulness of a novel computing platform called adiabatic logic, low-leakage FinFET devices and Magnetic Tunnel Junction (MTJ) Logic-in-Memory (LiM) architecture to design energy-efficient and DPA secure hardware. Further, we have also explored the usefulness of adiabatic logic in the design of energy-efficient and reliable Physically Unclonable Function (PUF) circuits to overcome the authentication and piracy issues in IoT devices. Adiabatic logic is a low-power circuit design technique to design energy-efficient hardware. Adiabatic logic has reduced dynamic switching energy loss due to the recycling of charge to the power clock. As the first contribution of this dissertation, we have proposed a novel DPA-resistant adiabatic logic family called Energy-Efficient Secure Positive Feedback Adiabatic Logic (EE-SPFAL). EE-SPFAL based circuits are energy-efficient compared to the conventional CMOS based design because of recycling the charge after every clock cycle. Further, EE-SPFAL based circuits consume uniform power irrespective of input data transition which makes them resilience against DPA attacks. Scaling of CMOS transistors have served the industry for more than 50 years in providing integrated circuits that are denser, and cheaper along with its high performance, and low power. However, scaling of the transistors leads to increase in leakage current. Increase in leakage current reduces the energy-efficiency of the computing circuits,and increases their vulnerability to DPA attack. Hence, it is important to investigate the crypto circuits in low leakage devices such as FinFET to make them energy-efficient and DPA resistant. In this dissertation, we have proposed a novel FinFET based Secure Adiabatic Logic (FinSAL) family. FinSAL based designs utilize the low-leakage FinFET device along with adiabatic logic principles to improve energy-efficiency along with its resistance against DPA attack. Recently, Magnetic Tunnel Junction (MTJ)/CMOS based Logic-in-Memory (LiM) circuits have been explored to design low-power non-volatile hardware. Some of the advantages of MTJ device include non-volatility, near-zero leakage power, high integration density and easy compatibility with CMOS devices. However, the differences in power consumption between the switching of MTJ devices increase the vulnerability of Differential Power Analysis (DPA) based side-channel attack. Further, the MTJ/CMOS hybrid logic circuits which require frequent switching of MTJs are not very energy-efficient due to the significant energy required to switch the MTJ devices. In the third contribution of this dissertation, we have investigated a novel approach of building cryptographic hardware in MTJ/CMOS circuits using Look-Up Table (LUT) based method where the data stored in MTJs are constant during the entire encryption/decryption operation. Currently, high supply voltage is required in both writing and sensing operations of hybrid MTJ/CMOS based LiM circuits which consumes a considerable amount of energy. In order to meet the power budget in low-power devices, it is important to investigate the novel design techniques to design ultra-low-power MTJ/CMOS circuits. In the fourth contribution of this dissertation, we have proposed a novel energy-efficient Secure MTJ/CMOS Logic (SMCL) family. The proposed SMCL logic family consumes uniform power irrespective of data transition in MTJ and more energy-efficient compared to the state-of-art MTJ/ CMOS designs by using charge sharing technique. The other important contribution of this dissertation is the design of reliable Physical Unclonable Function (PUF). Physically Unclonable Function (PUF) are circuits which are used to generate secret keys to avoid the piracy and device authentication problems. However, existing PUFs consume high power and they suffer from the problem of generating unreliable bits. This dissertation have addressed this issue in PUFs by designing a novel adiabatic logic based PUF. The time ramp voltages in adiabatic PUF is utilized to improve the reliability of the PUF along with its energy-efficiency. Reliability of the adiabatic logic based PUF proposed in this dissertation is tested through simulation based temperature variations and supply voltage variations

Optimizing the integration and energy efficiency of through silicon via-based 3D interconnects

The aggressive scaling of CMOS process technology has been driving the rapid growth of the semiconductor industry for more than three decades. In recent years, the performance gains enabled by CMOS scaling have been increasingly challenged by highlyparasitic on-chip interconnects as wire parasitics do not scale at the same pace. Emerging 3D integration technologies based on vertical through-silicon vias (TSVs) promise a solution to the interconnect performance bottleneck, along with reduced fabrication cost and heterogeneous integration. As TSVs are a relatively recent interconnect technology, innovative test structures are required to evaluate and optimise the process, as well as extract parameters for the generation of design rules and models. From the circuit designer’s perspective, critical TSV characteristics are its parasitic capacitance, and thermomechanical stress distribution. This work proposes new test structures for extracting these characteristics. The structures were fabricated on a 65nm 3D process and used for the evaluation of that technology. Furthermore, as TSVs are implemented in large, densely interconnected 3D-system-on-chips (SoCs), the TSV parasitic capacitance may become an important source of energy dissipation. Typical low-power techniques based on voltage scaling can be used, though this represents a technical challenge in modern technology nodes. In this work, a novel TSV interconnection scheme is proposed based on reversible computing, which shows frequencydependent energy dissipation. The scheme is analysed using theoretical modelling, while a demonstrator IC was designed based on the developed theory and fabricated on a 130nm 3D process.EThOS - Electronic Theses Online ServiceEngineering and Physical Science Research Council (EPSRC)GBUnited Kingdo

Proceedings of the Third Infrared Detector Technology Workshop

This volume consists of 37 papers which summarize results presented at the Third Infrared Detector Technology Workshop, held February 7-9, 1989, at Ames Research Center. The workshop focused on infrared (IR) detector, detector array, and cryogenic electronic technologies relevant to low-background space astronomy. Papers on discrete IR detectors, cryogenic readouts, extrinsic and intrinsic IR arrays, and recent results from ground-based observations with integrated arrays were given. Recent developments in the second-generation Hubble Space Telescope (HST) infrared spectrometer and in detectors and arrays for the European Space Agency's Infrared Space Observatory (ISO) are also included, as are status reports on the Space Infrared Telescope Facility (SIRTF) and the Stratospheric Observatory for Infrared Astronomy (SOFIA) projects