Current Mirror With Programmable Floating Gate

Systems and methods are discussed for using a floating-gate MOSFET as a programmable reference circuit. One example of the programmable reference circuit is a programmable voltage reference source, while a second example of a programmable reference circuit is a programmable reference current source. The programmable voltage reference source and/or the reference current source may be incorporated into several types of circuits, such as comparator circuits, current-mirror circuits, and converter circuits. Comparator circuits and current-mirror circuits are often incorporated into circuits such as converter circuits. Converter circuits include analog-to-digital converters and digital-to-analog converters.Georgia Tech Research Corporatio

Analog-to-digital Converter With Programmable Floating Gate

Systems and methods are discussed for using a floating-gate MOSFET as a programmable reference circuit. One example of the programmable reference circuit is a programmable voltage reference source, while a second example of a programmable reference circuit is a programmable reference current source. The programmable voltage reference source and/or the reference current source may be incorporated into several types of circuits, such as comparator circuits, current-mirror circuits, and converter circuits. Comparator circuits and current-mirror circuits are often incorporated into circuits such as converter circuits. Converter circuits include analog-to-digital converters and digital-to-analog converters.Georgia Tech Research Corporatio

Design of a Class-D Audio Amplifier With Analog Volume Control for Mobile Applications

A class-D audio amplifier with analog volume control (AVC) section and driver section for wireless and portable applications is proposed in this paper. The analog volume control section, including an integrator, an analog MUX, and a programmable gain amplifier (PGA) is implemented with three analog inputs (Audio, Voice, FM). For driver section, including a ramp generator, a comparator, a level shifter and a gate driver is designed to obtain a low distortion and a highefficiency. Designed with 0.18 um 1P6M CMOS technology, the class-D audio amplifier with analog volume control achieves a total root-mean-square (RMS) output power of 0.5W, a total harmonic distortion plus noise (THD+N) at the 8-Ω load less than 0.06%, and a power efficiency of 89.9% with a total area of 1.74mm2

Low-Voltage Ultra-Low-Power Current Conveyor Based on Quasi-Floating Gate Transistors

The field of low-voltage low-power CMOS technology has grown rapidly in recent years; it is an essential prerequisite particularly for portable electronic equipment and implantable medical devices due to its influence on battery lifetime. Recently, significant improvements in implementing circuits working in the low-voltage low-power area have been achieved, but circuit designers face severe challenges when trying to improve or even maintain the circuit performance with reduced supply voltage. In this paper, a low-voltage ultra-low-power current conveyor second generation CCII based on quasi-floating gate transistors is presented. The proposed circuit operates at a very low supply voltage of only ±0.4 V with rail-to-rail voltage swing capability and a total quiescent power consumption of mere 9.5 µW. Further, the proposed circuit is not only able to process the AC signal as it's usual at quasi-floating gate transistors but also the DC which extends the applicability of the proposed circuit. In conclusion, an application example of the current-mode quadrature oscillator is presented. PSpice simulation results using the 0.18 µm TSMC CMOS technology are included to confirm the attractive properties of the proposed circuit

A Parallel Programmer for Non-Volatile Analog Memory Arrays

Since their introduction in 1967, floating-gate transistors have enjoyed widespread success as non-volatile digital memory elements in EEPROM and flash memory. In recent decades, however, a renewed interest in floating-gate transistors has focused on their viability as non-volatile analog memory, as well as programmable voltage and current sources. They have been used extensively in this capacity to solve traditional problems associated with analog circuit design, such as to correct for fabrication mismatch, to reduce comparator offset, and for amplifier auto-zeroing. They have also been used to implement adaptive circuits, learning systems, and reconfigurable systems. Despite these applications, their proliferation has been limited by complex programming procedures, which typically require high-precision test equipment and intimate knowledge of the programmer circuit to perform.;This work strives to alleviate this limitation by presenting an improved method for fast and accurate programming of floating-gate transistors. This novel programming circuit uses a digital-to-analog converter and an array of sample-and-hold circuits to facilitate fast parallel programming of floating-gate memory arrays and eliminate the need for high accuracy voltage sources. Additionally, this circuit employs a serial peripheral interface which digitizes control of the programmer, simplifying the programming procedure and enabling the implementation of software applications that obscure programming complexity from the end user. The efficient and simple parallel programming system was fabricated in a 0.5?m standard CMOS process and will be used to demonstrate the effectiveness of this new method

Development of ASIC for SiPM sensor readout

L'abstract è presente nell'allegato / the abstract is in the attachmen

Programming of Floating-Gate Transistors for Nonvolatile Analog Memory Array

Since they were introduced, floating-gate (FG) transistors have been used as non-volatile digital memory. Recent research has shown that floating-gate transistors can be successfully used as analog memory, specifically as programmable voltage and current sources. However, their proliferation has been limited due to the complex programming procedure and the complex testing equipment. Analog applications such as field-programmable analog arrays (FPAAs) require hundreds to thousands of floating-gate transistors on a single chip which makes the programming process even more complicated and very challenging. Therefore, a simplified, compact, and low-power scheme to program FGs are necessary. This work presents an improved version of the typical methodology for FG programming. Additionally, a novel programming methodology that utilizes negative voltages is presented here. This method simplifies the programming process by eliminating the use of supplementary and complicated infrastructure circuits, which makes the FG transistor a good candidate for low-power wireless sensor nodes and portable systems