Comparison of three control drive systems for interior permanent magnet synchronous motors

In a previous paper, we proposed a control strategy for interior permanent synchronous motors, which takes into account also the reduction of the motor power losses. The novelty of the suggested approach is that it takes into consideration the variations of all the motor parameters that have an influence on its efficiency. In order to verifyon the field the effectiveness of this new method, we implemented the proposed loss model algorithm in a control drive system and compared its performances, in terms of energy losses with respect to other conventional techniques

Characterization of the parameters of interior permanent magnet synchronous motors for a loss model algorithm

The paper provides the results of a detailed experimental study on the variations of the characteristics of an interior permanent magnet synchronous motor, when load, speed and/or magnetization conditions vary. In particular, the characterization is carried out by assessing, for several working conditions, the motor parameters that influence its efficiency. From the knowledge of the variability of these parameters, it is possible to develop a dynamic model of the motor, which accurately describes its behaviour and allows estimating the power losses for whatever speed and load. In order to validate the model, the values of the power losses obtained by using the model are compared with the values measured with experimental tests. The study shows that it is possible to maximize the motor efficiency just acting on the direct axis current component and, therefore, it can be considered a first step towards the definition of a loss model algorithm for a control drive system able to minimize in real-time the power losses of the motor

Towards an improved energy efficiency of the interior permanent magnet synchronous motor drives

This paper investigates the possibility of energy efficiency increase in the drives with high speed permanent magnet synchronous motors. The losses are decreased by the proposed procedure, i.e. proper allocation of the available stator current capacity to the direct and quadrature current components. The approach provides increased energy efficiency by varying the ratio between copper and iron losses. [Projekat Ministarstva nauke Republike Srbije, br. III042004

Design and implementation of a grid-connected variable-speed PM WECS

Includes bibliographical references (leaves 120-122).As renewable energy (RE) sources are increasingly becoming an integral part of the world's power generation capacity, they are becoming more sophisticated and provide a solid platform for power generation today. Wind Energy is the fastest growing RE source. The correct understanding of issues associated with this technology and how to address them is integral in furthering this RE source... The main objective of the work presented in this thesis is the full understanding and implementation of a PM Wind Turbine System

Multi-level-objective design optimization of permanent magnet synchronous wind generator and solar photovoltaic system for an urban environment application

This Ph.D. thesis illustrates a novel study on the analytical and numerical design optimization of radial-flux permanent magnet synchronous wind generators (PMSGs) for small power generation in an urban area, in which an outer rotor topology with a closed-slot stator is employed. The electromagnetic advantages of a double-layer fractional concentration non-overlapping winding configuration are discussed. The analytical behavior of a PMSG is studied in detail; especially for magnetic flux density distribution, time and space harmonics, flux linkages, back-EMF, cogging torque, torque, output power, efficiency, and iron losses computation. The electromagnetic behavior of PMSGs are evaluated when a number of various Halbach array magnetization topologies are presented to maximize the generator’s performance. In addition, the thermal behavior of the PMSG is improved using an innovative natural air-cooling system for rated speed and higher to decrease the machine’s heat mainly at the stator teeth. The analytical investigation is verified via 2-D and 3-D finite element analysis along with a good experimental agreement. Design optimization of electrical machines plays the deterministic role in performance improvements such as the magnetization pattern, output power, and efficiency maximization, as well as losses and material cost minimization. This dissertation proposes a novel multi-objective design optimization technique using a dual-level response surface methodology (D-RSM) and Booth’s algorithm (coupled to a memetic algorithm known as simulated annealing) to maximize the output power and minimize material cost through sizing optimization. Additionally, the efficiency maximization by D-RSM is investigated while the PMSG and drive system are on duty as the whole. It is shown that a better fit is available when utilizing modern design functions such as mixed-resolution central composite (MR-CCD) and mixed-resolution robust (MR-RD), due to controllable and uncontrollable design treatments, and also a Window-Zoom-in approach. The proposed design optimization was verified by an experimental investigation. Additionally, there are several novel studies on vibro-acoustic design optimization of the PMSGs with considering variable speed analysis and natural frequencies using two techniques to minimize the magnetic noise and vibrations. Photovoltaic system design optimization considered of 3-D modeling of an innovative application-oriented urban environment structure, a smart tree for small power generation. The horizon shading is modeled as a broken line superimposed onto the sun path diagram, which can hold any number of height/azimuth points in this original study. The horizon profile is designed for a specific location on the Barcelona coast in Spain and the meteorological data regarding the location of the project was also considered. Furthermore, the input weather data is observed and stored for the whole year (in 2016). These data include, ambient temperature, module’s temperature (open and closed circuits tests), and shading average rate. A novel Pareto-based 3-D analysis was used to identify complete and partial shading of the photovoltaic system. A significant parameter for a photovoltaic (PV) module operation is the nominal operating cell temperature (NOCT). In this research, a glass/glass module has been referenced to the environment based on IEC61215 via a closed-circuit and a resistive load to ensure the module operates at the maximum power point. The proposed technique in this comparative study attempts to minimize the losses in a certain area with improved output energy without compromising the overall efficiency of the system. A Maximum Power Point Track (MPPT) controller is enhanced by utilizing an advanced perturb & observe (P&O) algorithm to maintain the PV operating point at its maximum output under different temperatures and insolation. The most cost-effective design of the PV module is achieved via optimizing installation parameters such as tilt angle, pitch, and shading to improve the energy yield. The variation of un-replicated factorials using a Window-Zoom-in approach is examined to determine the parameter settings and to check the suitability of the design. An experimental investigation was carried out to verify the 3-D shading analysis and NOCT technique for an open-circuit and grid-connected PV module.Esta tesis muestra un novedoso estudio referente al diseño optimizado de forma analítica y numérica de un generador síncrono de imanes permanentes (PMSGs) para una aplicación de microgeneración eólica en un entorno urbano, donde se ha escogido una topología de rotor exterior con un estator de ranuras cerradas. Las ventajas electromagnéticas de los arrollamientos fraccionarios de doble capa, con bobinas concentradas se discuten ampliamente en la parte inicial del diseño del mismo, así como las características de distribución de la inducción, los armónicos espaciales y temporales, la fem generada, el par de cogging así como las características de salida (par, potencia generada, la eficiencia y la distribución y cálculo de las pérdidas en el hierro que son analizadas detalladamente) Posteriormente se evalúan diferentes configuraciones de estructuras de imanes con magnetización Halbach con el fin de maximizar las prestaciones del generador. Adicionalmente se analiza la distribución de temperaturas y su mejora mediante el uso de un novedoso diseño mediante el uso de ventilación natural para velocidades próximas a la nominal y superiores con el fin de disminuir la temperatura de la máquina, principalmente en el diente estatórico. El cálculo analítico se completa mediante simulaciones 2D y 3D utilizando el método de los elementos finitos así como mediante diversas experiencias que validan los modelos y aproximaciones realizadas. Posteriormente se desarrollan algoritmos de optimización aplicados a variables tales como el tipo de magnetización, la potencia de salida, la eficiencia así como la minimización de las pérdidas y el coste de los materiales empleados. En la tesis se proponen un nuevo diseño optimizado basado en una metodología multinivel usando la metodología de superficie de respuesta (D-RSM) y un algoritmo de Booth (maximizando la potencia de salida y minimizando el coste de material empleado) Adicionalmente se investiga la maximización de la eficiencia del generador trabajando conjuntamente con el circuito de salida acoplado. El algoritmo utilizado queda validado mediante la experimentación desarrollada conjuntamente con el mismo. Adicionalmente, se han realizado diversos estudios vibroacústicos trabajando a velocidad variable usando dos técnicas diferentes para reducir el ruido generado y las vibraciones producidas. Posteriormente se considera un sistema fotovoltaico orientado a aplicaciones urbanas que hemos llamado “Smart tree for small power generation” y que consiste en un poste con un generador eólico en la parte superior juntamente con uno o más paneles fotovoltaicos. Este sistema se ha modelado usando metodologías en 3D. Se ha considerado el efecto de las sombras proyectadas por los diversos elementos usando datos meteorológicos y de irradiación solar de la propia ciudad de Barcelona. Usando una metodología basada en un análisis 3D y Pareto se consigue identificar completamente el sistema fotovoltaico; para este sistema se considera la temperatura de la célula fotovoltaica y la carga conectada con el fin de generar un algoritmo de control que permita obtener el punto de trabajo de máxima potencia (MPPT) comprobándose posteriormente el funcionamiento del algoritmo para diversas situaciones de funcionamiento del sistemaLa tesis desenvolupa un nou estudi per al disseny optimitzat, analític i numèric, d’un generador síncron d’imants permanents (PMSGs) per a una aplicació de microgeneració eòlica en aplicacions urbanes, on s’ha escollit una configuració amb rotor exterior i estator amb ranures tancades. Es discuteixen de forma extensa els avantatges electromagnètics dels bobinats fraccionaris de doble capa així com les característiques resultats vers la distribució de les induccions, els harmònics espacials i temporals, la fem generada, el parell de cogging i les característiques de sortida (parell, potencia, eficiència i pèrdues) Tanmateix s’afegeix l’estudi de diferents estructures Halbach per als imants permanents a fi i efecte de maximitzar les característiques del generador. Tot seguit s’analitza la distribució de temperatures i la seva reducció mitjançant la utilització d’una nova metodologia basada en la ventilació natural. Els càlculs analítics es complementen mitjançant anàlisi en 2 i 3 dimensions utilitzant elements finits i diverses experiències que validen els models i aproximacions emprades. Una vegada fixada la geometria inicial es desenvolupen algoritmes d’optimització per a diverses variables (tipus de magnetització dels imants, potencia de sortida, eficiència, minimització de pèrdues i cost dels materials) La tesi planteja una optimització multinivell emprant la metodologia de superfície de resposta i un algoritme de Booth; a més, es realitza la optimització considerant el circuit de sortida. L’algoritme resta validat per la experimentació realitzada. Finalment, s’han considerat diversos estudis vibroacústic treballant a velocitat variable, emprant dues tècniques diferents per a reduir el soroll i les vibracions desenvolupades. Per a finalitzar l’estudi es considera un sistema format per una turbina eòlica instal·lada sobre un pal de llum autònom, els panells fotovoltaics corresponents i el sistema de càrrega. Per a modelitzar l’efecte de l’ombrejat s’ha emprat un model en 3D i les dades del temps i d’irradiació solar de la ciutat de Barcelona. El model s’ha identificat completament i s’ha generat un algoritme de control que considera, a més, l’efecte de la temperatura de la cèl·lula fotovoltaica y la càrrega connectada al sistema per tal d’aconseguir el seguiment del punt de màxima potenciaPostprint (published version

Efficiency Optimised Control of Interior Permanent Magnet Machine Drives in Electric Vehicle Applications

The thesis focuses on the losses minimisation of an interior permanent magnet synchronous machine (IPMSM) drive in electric vehicle applications. As drive losses are a combination of the IPMSM losses and the inverter losses, this thesis is mainly divided into two parts: the first part deals with minimising the copper and iron losses of the IPMSM with due account of machine parameters variations and the voltage drop across the stator winding resistance. A new losses minimisation algorithm (LMA) which considers these issues is presented in this research. A comprehensive off-line simulation study based on this LMA is performed in order to evaluate the effect of the parameters variations, resistive voltage drop and iron losses on the IPMSM optimal efficiency operation. It is shown that the parameters variations and resistive voltage drop should be included in the losses minimisation to achieve IPMSM optimal efficiency operation. On the other hand, the minimum losses operation points are not significantly affected by the utilised IPMSM iron losses. The proposed LMA is implemented with non-linear look-up tables (LUTs) using the current commands developed for both constant torque and field weakening operations. Good matching between the simulation and experimental results has been achieved. Reducing the inverter switching losses is the aim of the second part of this PhD research in addition to decrease the common mode voltage (CMV) which may lead to undesirable motor bearing current and electromagnetic interference. A comparative study between up-to-date PWM techniques for CMV reduction with the conventional space vector PWM (SVPWM technique) through simulation studies are presented. Due to its advantages on reducing both the switching losses and CMV of the inverter over all (αβ) voltage hexagon modulation regions, the LuPWM technique is selected for the tested IPMSM drive. Firstly, the scalar implementation of this LuPWM technique using the sine triangle waveform modulation technique on a simulation model of a resistor-inductor (R-L) inductive load is validated with sinusoidal current waveforms. However, implementation of the LuPWM in the closed loop control system of the tested IPMSM drive results in a considerable unexpected distortion in the phase current waveforms especially at low demanded torques. A study on this issue shows that due to the unavoidable ripples on the electrical angle position information leading to the malfunction on determining the (αβ) voltage hexagon sectors, the sector transition point of the LuPWM pulses especially when the state of the LuPWM pulse is changed between On-state and Off-state is strongly affected. Consequently, the current waveforms for a closed-loop drive system under the LuPWM technique during the sectors transition period become seriously distorted. In this thesis, the LuPWM current waveforms distortion problem is proposed to be addressed by modifying the pulse pattern of the traditional LuPWM technique around the (αβ) voltage hexagon sectors transition points associated with significant current waveforms distortion as aforementioned. Under this proposed PWM technique denoted as Mod-LuPWM technique, the switching state of each LuPWM pulse is suggested to be hold for an optimum small period around each transition period. Hence, the adverse effects of the angular ripple and the voltage error will be evened out between the “Turn-On” and “Turn-Off” transitions. Therefore, sinusoidal current waveforms can be obtained for closed-loop drive system under the proposed Mod-LuPWM. In addition, similar to the traditional LuPWM the Mod-LuPWM technique own the ability of on reducing the peak-to-peak common mode voltage value to one sixth of the DC-link voltage compared with the traditional PWMs. On the other hand, due to its switching characteristics, the switching losses of the drive system under the Mod-LuPWM technique are also reduced by one third during the switching period leading to an increase on the switching device life-time. Furthermore, as its implementation does not require any additional hardware, the proposed Mod-LuPWM can be employed for any existing drive system without any increase in the total drive cost. The proposed Mod-LuPWM has been validated with well-matched between simulation and experimental results showing significant current waveform improvements and considerable CMV reduction

Combined Kinetic and Electrochemical Energy Storage Systems Offering Balancing Services to Electrical Grids

Energy storage technologies have a wide range of applications. Besides consumer electronics and electric vehicles, stationary energy storages are used to improve the power quality of electrical grids by offering balancing services. The investigated energy storage system for the provision of grid balancing services combines kinetic and electrochemical energy storages. The considered kinetic storage comprises high-speed flywheel storages according to the parameters of the prototypes developed at the Technical University of Darmstadt. The considered battery storage is composed of lithium-ion cells with lithium nickel manganese cobalt oxides in the cathode and graphite in the anode. In order to estimate the operating cost of the combined energy storage system, the power losses of the lithium-ion cell, the flywheel storage and the corresponding power converters are modelled. The derived loss function of the flywheel storage predominantly depends on its speed and the current of its permanent magnet synchronous machine. Similarly, the derived loss function of the lithium-ion cell mainly depends on its state of charge and its current. To consider the effects of the lithium-ion cell degradation, an empirical degradation model is further developed and parametrized based on the manufacturer specification for the lithium-ion cells used. The frequency containment reserve constitutes the main application of the combined energy storage and therefore determines the load profile. The probability distribution of a sampled 24-hour profile of the grid frequency of continental Europe is used to collectively size the combined energy storage. The degradation of the lithium-ion cells is thereby considered, so that the battery fulfils the requirements of the application throughout the target service life. The energy management of the combined storage system involves not only the power split among the storage units, but also the control of the individual storages. Therefore, the stator current that minimizes the total losses of both the electric machine and the power converter of the flywheel storage is derived. To minimize the instantaneous energy conversion losses of the combined energy storage, the optimal power share of the storage technologies is analytically derived using simplified loss functions and evaluated through simulations. Subsequently, the energy management is implemented in a programmable controller and tested on a prototype combined energy storage system. Despite the high uncertainties involved in the experimental investigation, its results are in qualitative congruence with the corresponding simulations. The cost-efficiency of combined energy storage systems is compared with that of battery-only systems for the applications of frequency containment reserve, frequency containment reserve along with wayside energy recovery in railway networks and frequency containment reserve along with electric vehicle fast charging. To optimally size the combined energy storage systems, a cost-benefit analysis is conducted, in which the total cost of ownership serves as cost and a low degradation of the lithium-ion cells serves as benefit. Optimally sized combined energy storages result in a lower total cost of ownership than optimally sized battery-only storages, which is more pronounced in use cases that involve high and frequent alternating load