A Consolidated Review of Path Planning and Optimization Techniques: Technical Perspectives and Future Directions

In this paper, a review on the three most important communication techniques (ground, aerial, and underwater vehicles) has been presented that throws light on trajectory planning, its optimization, and various issues in a summarized way. This kind of extensive research is not often seen in the literature, so an effort has been made for readers interested in path planning to fill the gap. Moreover, optimization techniques suitable for implementing ground, aerial, and underwater vehicles are also a part of this review. This paper covers the numerical, bio-inspired techniques and their hybridization with each other for each of the dimensions mentioned. The paper provides a consolidated platform, where plenty of available research on-ground autonomous vehicle and their trajectory optimization with the extension for aerial and underwater vehicles are documented

Minimum Distance and Minimum Time Optimal Path Planning with Bioinspired Machine Learning Algorithms for Impaired Unmanned Air Vehicles

Unmanned air vehicles operate in highly dynamic and unknown environments where they can encounter unexpected and unseen failures. In the presence of emergencies, autonomous unmanned air vehicles should be able to land at a minimum distance or minimum time. Impaired unmanned air vehicles define actuator failures and this impairment changes their unstable and uncertain dynamics; henceforth, path planning algorithms must be adaptive and model-free. In addition, path planning optimization problems must consider the unavoidable actuator saturations, kinematic and dynamic constraints for successful real-time applications. Therefore, this paper develops 3D path planning algorithms for quadrotors with parametric uncertainties and various constraints. In this respect, this paper constructs a multi-dimensional particle swarm optimization and a multi-dimensional genetic algorithm to plan paths for translational, rotational, and Euler angles and generates the corresponding control signals. The algorithms are assessed and compared both in the simulation and experimental environments. Results show that the multi-dimensional genetic algorithm produces shorter minimum distance and minimum time paths under the constraints. The real-time experiments prove that the quadrotor exactly follows the produced path utilizing the available maximum rotor speeds

Motion Planning of UAV Swarm: Recent Challenges and Approaches

The unmanned aerial vehicle (UAV) swarm is gaining massive interest for researchers as it has huge significance over a single UAV. Many studies focus only on a few challenges of this complex multidisciplinary group. Most of them have certain limitations. This paper aims to recognize and arrange relevant research for evaluating motion planning techniques and models for a swarm from the viewpoint of control, path planning, architecture, communication, monitoring and tracking, and safety issues. Then, a state-of-the-art understanding of the UAV swarm and an overview of swarm intelligence (SI) are provided in this research. Multiple challenges are considered, and some approaches are presented. Findings show that swarm intelligence is leading in this era and is the most significant approach for UAV swarm that offers distinct contributions in different environments. This integration of studies will serve as a basis for knowledge concerning swarm, create guidelines for motion planning issues, and strengthens support for existing methods. Moreover, this paper possesses the capacity to engender new strategies that can serve as the grounds for future work

Adaptive and learning-based formation control of swarm robots

Autonomous aerial and wheeled mobile robots play a major role in tasks such as search and rescue, transportation, monitoring, and inspection. However, these operations are faced with a few open challenges including robust autonomy, and adaptive coordination based on the environment and operating conditions, particularly in swarm robots with limited communication and perception capabilities. Furthermore, the computational complexity increases exponentially with the number of robots in the swarm. This thesis examines two different aspects of the formation control problem. On the one hand, we investigate how formation could be performed by swarm robots with limited communication and perception (e.g., Crazyflie nano quadrotor). On the other hand, we explore human-swarm interaction (HSI) and different shared-control mechanisms between human and swarm robots (e.g., BristleBot) for artistic creation. In particular, we combine bio-inspired (i.e., flocking, foraging) techniques with learning-based control strategies (using artificial neural networks) for adaptive control of multi- robots. We first review how learning-based control and networked dynamical systems can be used to assign distributed and decentralized policies to individual robots such that the desired formation emerges from their collective behavior. We proceed by presenting a novel flocking control for UAV swarm using deep reinforcement learning. We formulate the flocking formation problem as a partially observable Markov decision process (POMDP), and consider a leader-follower configuration, where consensus among all UAVs is used to train a shared control policy, and each UAV performs actions based on the local information it collects. In addition, to avoid collision among UAVs and guarantee flocking and navigation, a reward function is added with the global flocking maintenance, mutual reward, and a collision penalty. We adapt deep deterministic policy gradient (DDPG) with centralized training and decentralized execution to obtain the flocking control policy using actor-critic networks and a global state space matrix. In the context of swarm robotics in arts, we investigate how the formation paradigm can serve as an interaction modality for artists to aesthetically utilize swarms. In particular, we explore particle swarm optimization (PSO) and random walk to control the communication between a team of robots with swarming behavior for musical creation

IEEE Access Special Section Editorial: Big Data Technology and Applications in Intelligent Transportation

During the last few years, information technology and transportation industries, along with automotive manufacturers and academia, are focusing on leveraging intelligent transportation systems (ITS) to improve services related to driver experience, connected cars, Internet data plans for vehicles, traffic infrastructure, urban transportation systems, traffic collaborative management, road traffic accidents analysis, road traffic flow prediction, public transportation service plan, personal travel route plans, and the development of an effective ecosystem for vehicles, drivers, traffic controllers, city planners, and transportation applications. Moreover, the emerging technologies of the Internet of Things (IoT) and cloud computing have provided unprecedented opportunities for the development and realization of innovative intelligent transportation systems where sensors and mobile devices can gather information and cloud computing, allowing knowledge discovery, information sharing, and supported decision making. However, the development of such data-driven ITS requires the integration, processing, and analysis of plentiful information obtained from millions of vehicles, traffic infrastructures, smartphones, and other collaborative systems like weather stations and road safety and early warning systems. The huge amount of data generated by ITS devices is only of value if utilized in data analytics for decision-making such as accident prevention and detection, controlling road risks, reducing traffic carbon emissions, and other applications which bring big data analytics into the picture

Smooth 3D Path Planning by Means of Multiobjective Optimization for Fixed-Wing UAVs

[EN] Demand for 3D planning and guidance algorithms is increasing due, in part, to the increase in unmanned vehicle-based applications. Traditionally, two-dimensional (2D) trajectory planning algorithms address the problem by using the approach of maintaining a constant altitude. Addressing the problem of path planning in a three-dimensional (3D) space implies more complex scenarios where maintaining altitude is not a valid approach. The work presented here implements an architecture for the generation of 3D flight paths for fixed-wing unmanned aerial vehicles (UAVs). The aim is to determine the feasible flight path by minimizing the turning effort, starting from a set of control points in 3D space, including the initial and final point. The trajectory generated takes into account the rotation and elevation constraints of the UAV. From the defined control points and the movement constraints of the UAV, a path is generated that combines the union of the control points by means of a set of rectilinear segments and spherical curves. However, this design methodology means that the problem does not have a single solution; in other words, there are infinite solutions for the generation of the final path. For this reason, a multiobjective optimization problem (MOP) is proposed with the aim of independently maximizing each of the turning radii of the path. Finally, to produce a complete results visualization of the MOP and the final 3D trajectory, the architecture was implemented in a simulation with Matlab/Simulink/flightGear.The authors would like to acknowledge the Spanish Ministerio de Ciencia, Innovacion y Universidades for providing funding through the project RTI2018-096904-B-I00 and the local administration Generalitat Valenciana through projects GV/2017/029 and AICO/2019/055. Franklin Samaniego thanks IFTH (Instituto de Fomento al Talento Humano) Ecuador (2015-AR2Q9209), for its sponsorship of this work.Samaniego, F.; Sanchís Saez, J.; Garcia-Nieto, S.; Simarro Fernández, R. (2020). Smooth 3D Path Planning by Means of Multiobjective Optimization for Fixed-Wing UAVs. Electronics. 9(1):1-23. https://doi.org/10.3390/electronics9010051S12391Kyriakidis, M., Happee, R., & de Winter, J. C. F. (2015). Public opinion on automated driving: Results of an international questionnaire among 5000 respondents. Transportation Research Part F: Traffic Psychology and Behaviour, 32, 127-140. doi:10.1016/j.trf.2015.04.014Münzer, S., Zimmer, H. D., Schwalm, M., Baus, J., & Aslan, I. (2006). Computer-assisted navigation and the acquisition of route and survey knowledge. Journal of Environmental Psychology, 26(4), 300-308. doi:10.1016/j.jenvp.2006.08.001Morales, Y., Kallakuri, N., Shinozawa, K., Miyashita, T., & Hagita, N. (2013). Human-comfortable navigation for an autonomous robotic wheelchair. 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems. doi:10.1109/iros.2013.6696743Krotkov, E., & Hebert, M. (s. f.). Mapping and positioning for a prototype lunar rover. Proceedings of 1995 IEEE International Conference on Robotics and Automation. doi:10.1109/robot.1995.525697Rodriguez-Seda, E. J. (2014). Decentralized trajectory tracking with collision avoidance control for teams of unmanned vehicles with constant speed. 2014 American Control Conference. doi:10.1109/acc.2014.6859184Xiaoping Ren, & Zixing Cai. (2010). Kinematics model of unmanned driving vehicle. 2010 8th World Congress on Intelligent Control and Automation. doi:10.1109/wcica.2010.5554512Jun, J.-Y., Saut, J.-P., & Benamar, F. (2016). Pose estimation-based path planning for a tracked mobile robot traversing uneven terrains. Robotics and Autonomous Systems, 75, 325-339. doi:10.1016/j.robot.2015.09.014Li, Y., Ding, L., & Liu, G. (2016). Attitude-based dynamic and kinematic models for wheels of mobile robot on deformable slope. Robotics and Autonomous Systems, 75, 161-175. doi:10.1016/j.robot.2015.10.006Mekonnen, G., Kumar, S., & Pathak, P. M. (2016). Wireless hybrid visual servoing of omnidirectional wheeled mobile robots. Robotics and Autonomous Systems, 75, 450-462. doi:10.1016/j.robot.2015.08.008Xu, J., Wang, M., & Qiao, L. (2015). Dynamical sliding mode control for the trajectory tracking of underactuated unmanned underwater vehicles. Ocean Engineering, 105, 54-63. doi:10.1016/j.oceaneng.2015.06.022Gafurov, S. A., & Klochkov, E. V. (2015). Autonomous Unmanned Underwater Vehicles Development Tendencies. Procedia Engineering, 106, 141-148. doi:10.1016/j.proeng.2015.06.017Qi, X., & Cai, Z. (2018). Three-dimensional formation control based on nonlinear small gain method for multiple underactuated underwater vehicles. Ocean Engineering, 151, 105-114. doi:10.1016/j.oceaneng.2018.01.032Ramasamy, S., Sabatini, R., Gardi, A., & Liu, J. (2016). LIDAR obstacle warning and avoidance system for unmanned aerial vehicle sense-and-avoid. Aerospace Science and Technology, 55, 344-358. doi:10.1016/j.ast.2016.05.020Zhu, L., Cheng, X., & Yuan, F.-G. (2016). A 3D collision avoidance strategy for UAV with physical constraints. Measurement, 77, 40-49. doi:10.1016/j.measurement.2015.09.006Chee, K. Y., & Zhong, Z. W. (2013). Control, navigation and collision avoidance for an unmanned aerial vehicle. Sensors and Actuators A: Physical, 190, 66-76. doi:10.1016/j.sna.2012.11.017Courbon, J., Mezouar, Y., Guénard, N., & Martinet, P. (2010). Vision-based navigation of unmanned aerial vehicles. Control Engineering Practice, 18(7), 789-799. doi:10.1016/j.conengprac.2010.03.004Aguilar, W., & Morales, S. (2016). 3D Environment Mapping Using the Kinect V2 and Path Planning Based on RRT Algorithms. Electronics, 5(4), 70. doi:10.3390/electronics5040070Yan, F., Liu, Y.-S., & Xiao, J.-Z. (2013). Path Planning in Complex 3D Environments Using a Probabilistic Roadmap Method. International Journal of Automation and Computing, 10(6), 525-533. doi:10.1007/s11633-013-0750-9Yeh, H.-Y., Thomas, S., Eppstein, D., & Amato, N. M. (2012). UOBPRM: A uniformly distributed obstacle-based PRM. 2012 IEEE/RSJ International Conference on Intelligent Robots and Systems. doi:10.1109/iros.2012.6385875Liang, Y., & Xu, L. (2009). Global path planning for mobile robot based genetic algorithm and modified simulated annealing algorithm. Proceedings of the first ACM/SIGEVO Summit on Genetic and Evolutionary Computation - GEC ’09. doi:10.1145/1543834.1543875Liu, J., Yang, J., Liu, H., Tian, X., & Gao, M. (2016). An improved ant colony algorithm for robot path planning. Soft Computing, 21(19), 5829-5839. doi:10.1007/s00500-016-2161-7Cao, H., Sun, S., Zhang, K., & Tang, Z. (2016). Visualized trajectory planning of flexible redundant robotic arm using a novel hybrid algorithm. Optik, 127(20), 9974-9983. doi:10.1016/j.ijleo.2016.07.078Duan, H., & Qiao, P. (2014). Pigeon-inspired optimization: a new swarm intelligence optimizer for air robot path planning. International Journal of Intelligent Computing and Cybernetics, 7(1), 24-37. doi:10.1108/ijicc-02-2014-0005Pandey, A., & Parhi, D. R. (2017). Optimum path planning of mobile robot in unknown static and dynamic environments using Fuzzy-Wind Driven Optimization algorithm. Defence Technology, 13(1), 47-58. doi:10.1016/j.dt.2017.01.001Samaniego, F., Sanchis, J., García-Nieto, S., & Simarro, R. (2019). Recursive Rewarding Modified Adaptive Cell Decomposition (RR-MACD): A Dynamic Path Planning Algorithm for UAVs. Electronics, 8(3), 306. doi:10.3390/electronics8030306Dubins, L. E. (1957). On Curves of Minimal Length with a Constraint on Average Curvature, and with Prescribed Initial and Terminal Positions and Tangents. American Journal of Mathematics, 79(3), 497. doi:10.2307/2372560Fleury, S., Soueres, P., Laumond, J.-P., & Chatila, R. (1995). Primitives for smoothing mobile robot trajectories. IEEE Transactions on Robotics and Automation, 11(3), 441-448. doi:10.1109/70.388788Vanegas, G., Samaniego, F., Girbes, V., Armesto, L., & Garcia-Nieto, S. (2018). Smooth 3D path planning for non-holonomic UAVs. 2018 7th International Conference on Systems and Control (ICSC). doi:10.1109/icosc.2018.8587835Brezak, M., & Petrovic, I. (2014). Real-time Approximation of Clothoids With Bounded Error for Path Planning Applications. IEEE Transactions on Robotics, 30(2), 507-515. doi:10.1109/tro.2013.2283928Barsky, B. A., & DeRose, T. D. (1989). Geometric continuity of parametric curves: three equivalent characterizations. IEEE Computer Graphics and Applications, 9(6), 60-69. doi:10.1109/38.41470Kim, H., Kim, D., Shin, J.-U., Kim, H., & Myung, H. (2014). Angular rate-constrained path planning algorithm for unmanned surface vehicles. Ocean Engineering, 84, 37-44. doi:10.1016/j.oceaneng.2014.03.034Isaacs, J., & Hespanha, J. (2013). Dubins Traveling Salesman Problem with Neighborhoods: A Graph-Based Approach. Algorithms, 6(1), 84-99. doi:10.3390/a6010084Masehian, E., & Kakahaji, H. (2014). NRR: a nonholonomic random replanner for navigation of car-like robots in unknown environments. Robotica, 32(7), 1101-1123. doi:10.1017/s0263574713001276Fraichard, T., & Scheuer, A. (2004). From Reeds and Shepp’s to Continuous-Curvature Paths. IEEE Transactions on Robotics, 20(6), 1025-1035. doi:10.1109/tro.2004.833789Pepy, R., Lambert, A., & Mounier, H. (s. f.). Path Planning using a Dynamic Vehicle Model. 2006 2nd International Conference on Information & Communication Technologies. doi:10.1109/ictta.2006.1684472Girbés, V., Vanegas, G., & Armesto, L. (2019). Clothoid-Based Three-Dimensional Curve for Attitude Planning. Journal of Guidance, Control, and Dynamics, 42(8), 1886-1898. doi:10.2514/1.g003551De Lorenzis, L., Wriggers, P., & Hughes, T. J. R. (2014). Isogeometric contact: a review. GAMM-Mitteilungen, 37(1), 85-123. doi:10.1002/gamm.201410005Pigounakis, K. G., Sapidis, N. S., & Kaklis, P. D. (1996). Fairing Spatial B-Spline Curves. Journal of Ship Research, 40(04), 351-367. doi:10.5957/jsr.1996.40.4.351Pérez, L. H., Aguilar, M. C. M., Sánchez, N. M., & Montesinos, A. F. (2018). Path Planning Based on Parametric Curves. Advanced Path Planning for Mobile Entities. doi:10.5772/intechopen.72574Huh, U.-Y., & Chang, S.-R. (2014). A G2 Continuous Path-smoothing Algorithm Using Modified Quadratic Polynomial Interpolation. International Journal of Advanced Robotic Systems, 11(2), 25. doi:10.5772/57340Chang, S.-R., & Huh, U.-Y. (2014). A Collision-Free G2 Continuous Path-Smoothing Algorithm Using Quadratic Polynomial Interpolation. International Journal of Advanced Robotic Systems, 11(12), 194. doi:10.5772/59463Yaochu Jin, & Sendhoff, B. (2008). Pareto-Based Multiobjective Machine Learning: An Overview and Case Studies. IEEE Transactions on Systems, Man, and Cybernetics, Part C (Applications and Reviews), 38(3), 397-415. doi:10.1109/tsmcc.2008.919172Velasco-Carrau, J., García-Nieto, S., Salcedo, J. V., & Bishop, R. H. (2016). Multi-Objective Optimization for Wind Estimation and Aircraft Model Identification. Journal of Guidance, Control, and Dynamics, 39(2), 372-389. doi:10.2514/1.g001294Honig, E., Schucking, E. L., & Vishveshwara, C. V. (1974). Motion of charged particles in homogeneous electromagnetic fields. Journal of Mathematical Physics, 15(6), 774-781. doi:10.1063/1.1666728Iyer, B. R., & Vishveshwara, C. V. (1988). The Frenet-Serret formalism and black holes in higher dimensions. Classical and Quantum Gravity, 5(7), 961-970. doi:10.1088/0264-9381/5/7/005Laumanns, M., Thiele, L., Deb, K., & Zitzler, E. (2002). Combining Convergence and Diversity in Evolutionary Multiobjective Optimization. Evolutionary Computation, 10(3), 263-282. doi:10.1162/106365602760234108Blasco, X., Herrero, J. M., Sanchis, J., & Martínez, M. (2008). A new graphical visualization of n-dimensional Pareto front for decision-making in multiobjective optimization. Information Sciences, 178(20), 3908-3924. doi:10.1016/j.ins.2008.06.01