A Case for Time Slotted Channel Hopping for ICN in the IoT

Recent proposals to simplify the operation of the IoT include the use of Information Centric Networking (ICN) paradigms. While this is promising, several challenges remain. In this paper, our core contributions (a) leverage ICN communication patterns to dynamically optimize the use of TSCH (Time Slotted Channel Hopping), a wireless link layer technology increasingly popular in the IoT, and (b) make IoT-style routing adaptive to names, resources, and traffic patterns throughout the network--both without cross-layering. Through a series of experiments on the FIT IoT-LAB interconnecting typical IoT hardware, we find that our approach is fully robust against wireless interference, and almost halves the energy consumed for transmission when compared to CSMA. Most importantly, our adaptive scheduling prevents the time-slotted MAC layer from sacrificing throughput and delay

Unified radio and network control across heterogeneous hardware platforms

Experimentation is an important step in the investigation of techniques for handling spectrum scarcity or the development of new waveforms in future wireless networks. However, it is impractical and not cost effective to construct custom platforms for each future network scenario to be investigated. This problem is addressed by defining Unified Programming Interfaces that allow common access to several platforms for experimentation-based prototyping, research, and development purposes. The design of these interfaces is driven by a diverse set of scenarios that capture the functionality relevant to future network implementations while trying to keep them as generic as possible. Herein, the definition of this set of scenarios is presented as well as the architecture for supporting experimentation-based wireless research over multiple hardware platforms. The proposed architecture for experimentation incorporates both local and global unified interfaces to control any aspect of a wireless system while being completely agnostic to the actual technology incorporated. Control is feasible from the low-level features of individual radios to the entire network stack, including hierarchical control combinations. A testbed to enable the use of the above architecture is utilized that uses a backbone network in order to be able to extract measurements and observe the overall behaviour of the system under test without imposing further communication overhead to the actual experiment. Based on the aforementioned architecture, a system is proposed that is able to support the advancement of intelligent techniques for future networks through experimentation while decoupling promising algorithms and techniques from the capabilities of a specific hardware platform

Goodbye, ALOHA!

©2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.The vision of the Internet of Things (IoT) to interconnect and Internet-connect everyday people, objects, and machines poses new challenges in the design of wireless communication networks. The design of medium access control (MAC) protocols has been traditionally an intense area of research due to their high impact on the overall performance of wireless communications. The majority of research activities in this field deal with different variations of protocols somehow based on ALOHA, either with or without listen before talk, i.e., carrier sensing multiple access. These protocols operate well under low traffic loads and low number of simultaneous devices. However, they suffer from congestion as the traffic load and the number of devices increase. For this reason, unless revisited, the MAC layer can become a bottleneck for the success of the IoT. In this paper, we provide an overview of the existing MAC solutions for the IoT, describing current limitations and envisioned challenges for the near future. Motivated by those, we identify a family of simple algorithms based on distributed queueing (DQ), which can operate for an infinite number of devices generating any traffic load and pattern. A description of the DQ mechanism is provided and most relevant existing studies of DQ applied in different scenarios are described in this paper. In addition, we provide a novel performance evaluation of DQ when applied for the IoT. Finally, a description of the very first demo of DQ for its use in the IoT is also included in this paper.Peer ReviewedPostprint (author's final draft

Design and analysis of routing protocol for cognitive radio ad hoc networks in Heterogeneous Environment

Multi-hop routing protocol in cognitive radio mobile ad hoc networks (CRMANETs) is a critical issue. Furthermore, the routing metric used in multi-hop CRMANETs should reflect the bands availability, the links quality, the PU activities and quality of service (QoS) requirements of SUs. For the best of our knowledge, many of researchers investigated the performance of the different routing protocols in a homogeneous environment only. In this paper, we propose a heterogeneous cognitive radio routing protocol (HCR) operates in heterogeneous environment (i.e. the route from source to destination utilize the licensed and unlicensed spectrum bands). The proposed routing protocol is carefully developed to make a tradeoff between the channel diversity of the routing path along with the CRMANETs throughput. Using simulations, we discuss the performance of the proposed HCR routing protocol and compare it with the AODV routing protocol using a discrete-event simulation which we developed using JAVA platform

SmartDR: A Device-to-Device Communication for Post-Disaster Recovery

Natural disasters, such as earthquakes, can cause severe destruction and create havoc in the society.Buildings and other structures may collapse during disaster incidents causing injuries and deaths to victims trapped under debris and rubble. Immediately after a natural disaster incident, it becomes extremely difficult for first responders and rescuers to find and save trapped victims. Often searches are carried out blindly in random locations, which delay the rescue of the victims. This paper introduces a Smartphone Assisted Disaster Recovery (SmartDR) method for post-disaster communication using Smartphones. SmartDR utilizes the device-to-device (D2D) communication technology in Fifth Generation (5G) networks, which enables direct communication between proximate devices without the need of relaying through a network infrastructure, such as mobile access points or mobile base stations. We examine a scenario of multi-hop D2D communication where smartphones carried by trapped victims and other people in disaster affected areas can self-detect the occurrence of a disaster incident by monitoring the radio environment and then can self-switch to a disaster mode to transmit emergency help messages with their location coordinates to other nearby smartphones. To locate other nearby smartphones also operating in the disaster mode and in the same channel, each smartphone runs a rendezvous process. The emergency messages are thus relayed to the functional base station or rescue centre. To facilitate routing of the emergency messages, we propose a path selection algorithm, which considers both delay and the leftover energy of a device (a smartphone in this case). Thus, the SmartDR method includes: (i) a multi-channel channel hopping rendezvous protocol to improve the victim localization or neighbor discovery, and (ii) an energy-aware multi-path routing (Energy-aware ad-hoc on-demand distance vector or E-AODV) protocol to overcome the higher energy depletionrate at devices associated with single shortest path routing. The SmartDR method can guide search and rescue operations and increase the possibility of saving lives immediately aftermath a disasterincident. A simulation-based performance study is conducted to evaluate the protocol performance in post-disaster scenario. Simulation results show that a significant performance gain is achievable when a device utilises the channel information for the rendezvous process and the leftover energy