Analog design for manufacturability: lithography-aware analog layout retargeting

As transistor sizes shrink over time in the advanced nanometer technologies, lithography effects have become a dominant contributor of integrated circuit (IC) yield degradation. Random manufacturing variations, such as photolithographic defect or spot defect, may cause fatal functional failures, while systematic process variations, such as dose fluctuation and defocus, can result in wafer pattern distortions and in turn ruin circuit performance. This dissertation is focused on yield optimization at the circuit design stage or so-called design for manufacturability (DFM) with respect to analog ICs, which has not yet been sufficiently addressed by traditional DFM solutions. On top of a graph-based analog layout retargeting framework, in this dissertation the photolithographic defects and lithography process variations are alleviated by geometrical layout manipulation operations including wire widening, wire shifting, process variation band (PV-band) shifting, and optical proximity correction (OPC). The ultimate objective of this research is to develop efficient algorithms and methodologies in order to achieve lithography-robust analog IC layout design without circuit performance degradation

Via-configurable transistors array: a regular design technique to improve ICs yield

Process variations are a major bottleneck for digital CMOS integrated circuits manufacturability and yield. That is why regular techniques with different degrees of regularity are emerging as possible solutions. Our proposal is a new regular layout design technique called Via-Configurable Transistors Array (VCTA) that pushes to the limit circuit layout regularity for devices and interconnects in order to maximize regularity benefits. VCTA is predicted to perform worse than the Standard Cell approach designs for a certain technology node but it will allow the use of a future technology on an earlier time. Our objective is to optimize VCTA for it to be comparable to the Standard Cell design in an older technology. Simulations for the first unoptimized version of our VCTA of delay and energy consumption for a Full Adder circuit in the 90 nm technology node are presented and also the extrapolation for Carry-Ripple Adders from 4 bits to 64 bits.Peer ReviewedPostprint (published version

Analog layout design automation: ILP-based analog routers

The shrinking design window and high parasitic sensitivity in the advanced technology have imposed special challenges on the analog and radio frequency (RF) integrated circuit design. In this thesis, we propose a new methodology to address such a deficiency based on integer linear programming (ILP) but without compromising the capability of handling any special constraints for the analog routing problems. Distinct from the conventional methods, our algorithm utilizes adaptive resolutions for various routing regions. For a more congested region, a routing grid with higher resolution is employed, whereas a lower-resolution grid is adopted to a less crowded routing region. Moreover, we strengthen its speciality in handling interconnect width control so as to route the electrical nets based on analog constraints while considering proper interconnect width to address the acute interconnect parasitics, mismatch minimization, and electromigration effects simultaneously. In addition, to tackle the performance degradation due to layout dependent effects (LDEs) and take advantage of optical proximity correction (OPC) for resolution enhancement of subwavelength lithography, in this thesis we have also proposed an innovative LDE-aware analog layout migration scheme, which is equipped with our special routing methodology. The LDE constraints are first identified with aid of a special sensitivity analysis and then satisfied during the layout migration process. Afterwards the electrical nets are routed by an extended OPC-inclusive ILP-based analog router to improve the final layout image fidelity while the routability and analog constraints are respected in the meantime. The experimental results demonstrate the effectiveness and efficiency of our proposed methods in terms of both circuit performance and image quality compared to the previous works

Integrated Circuits Parasitic Capacitance Extraction Using Machine Learning and its Application to Layout Optimization

The impact of parasitic elements on the overall circuit performance keeps increasing from one technology generation to the next. In advanced process nodes, the parasitic effects dominate the overall circuit performance. As a result, the accuracy requirements of parasitic extraction processes significantly increased, especially for parasitic capacitance extraction. Existing parasitic capacitance extraction tools face many challenges to cope with such new accuracy requirements that are set by semiconductor foundries (\u3c 5% error). Although field-solver methods can meet such requirements, they are very slow and have a limited capacity. The other alternative is the rule-based parasitic capacitance extraction methods, which are faster and have a high capacity; however, they cannot consistently provide good accuracy as they use a pre-characterized library of capacitance formulas that cover a limited number of layout patterns. On the other hand, the new parasitic extraction accuracy requirements also added more challenges on existing parasitic-aware routing optimization methods, where simplified parasitic models are used to optimize layouts. This dissertation provides new solutions for interconnect parasitic capacitance extraction and parasitic-aware routing optimization methodologies in order to cope with the new accuracy requirements of advanced process nodes as follows. First, machine learning compact models are developed in rule-based extractors to predict parasitic capacitances of cross-section layout patterns efficiently. The developed models mitigate the problems of the pre-characterized library approach, where each compact model is designed to extract parasitic capacitances of cross-sections of arbitrary distributed metal polygons that belong to a specific set of metal layers (i.e., layer combination) efficiently. Therefore, the number of covered layout patterns significantly increased. Second, machine learning compact models are developed to predict parasitic capacitances of middle-end-of-line (MEOL) layers around FINFETs and MOSFETs. Each compact model extracts parasitic capacitances of 3D MEOL patterns of a specific device type regardless of its metal polygons distribution. Therefore, the developed MEOL models can replace field-solvers in extracting MEOL patterns. Third, a novel accuracy-based hybrid parasitic capacitance extraction method is developed. The proposed hybrid flow divides a layout into windows and extracts the parasitic capacitances of each window using one of three parasitic capacitance extraction methods that include: 1) rule-based; 2) novel deep-neural-networks-based; and 3) field-solver methods. This hybrid methodology uses neural-networks classifiers to determine an appropriate extraction method for each window. Moreover, as an intermediate parasitic capacitance extraction method between rule-based and field-solver methods, a novel deep-neural-networks-based extraction method is developed. This intermediate level of accuracy and speed is needed since using only rule-based and field-solver methods (for hybrid extraction) results in using field-solver most of the time for any required high accuracy extraction. Eventually, a parasitic-aware layout routing optimization and analysis methodology is implemented based on an incremental parasitic extraction and a fast optimization methodology. Unlike existing flows that do not provide a mechanism to analyze the impact of modifying layout geometries on a circuit performance, the proposed methodology provides novel sensitivity circuit models to analyze the integrity of signals in layout routes. Such circuit models are based on an accurate matrix circuit representation, a cost function, and an accurate parasitic sensitivity extraction. The circuit models identify critical parasitic elements along with the corresponding layout geometries in a certain route, where they measure the sensitivity of a route’s performance to corresponding layout geometries very fast. Moreover, the proposed methodology uses a nonlinear programming technique to optimize problematic routes with pre-determined degrees of freedom using the proposed circuit models. Furthermore, it uses a novel incremental parasitic extraction method to extract parasitic elements of modified geometries efficiently, where the incremental extraction is used as a part of the routing optimization process to improve the optimization runtime and increase the optimization accuracy

Standard cell optimization and physical design in advanced technology nodes

Integrated circuits (ICs) are at the heart of modern electronics, which rely heavily on the state-of-the-art semiconductor manufacturing technology. The key to pushing forward semiconductor technology is IC feature-size miniaturization. However, this brings ever-increasing design complexities and manufacturing challenges to the $340 billion semiconductor industry. The manufacturing of two-dimensional layout on high-density metal layers depends on complex design-for-manufacturing techniques and sophisticated empirical optimizations, which introduces huge amounts of turnaround time and yield loss in advanced technology nodes. Our study reveals that unidirectional layout design can significantly reduce the manufacturing complexities and improve the yield, which is becoming increasingly adopted in semiconductor industry [61, 89]. The lithography printing of unidirectional layout can be tightly controlled using advanced patterning techniques, such as self-aligned double and quadruple patterning. Despite the manufacturing benefits, unidirectional layout leads to more restrictive solution space and brings significant impacts on the IC design automation ow for routing closure. Notably, unidirectional routing limits the standard cell pin accessibility, which further exacerbates the resource competitions during routing. Moreover, for post-routing optimization, traditional redundant-via insertion has become obsolete under unidirectional routing style, which makes the yield enhancement task extremely challenging. Regardless of complex multiple patterning and design-for-manufacturing approaches, mask optimization through resolution enhancement techniques remains as the key strategy to improve the yield of the semiconductor manufacturing processes. Among them, Sub-Resolution Assist Feature (SRAF) generation is a very important method to improve lithographic process windows. Model-based SRAF generation has been widely used to achieve high accuracy but it is time-consuming and hard to obtain consistent SRAFs. This dissertation proposes novel CAD algorithms and methodologies for standard cell optimization and physical design in advanced technology nodes, which ultimately reduces the design cycle and manufacturing cost of IC design. First, a standard cell pin access optimization engine is proposed to evaluate the pin accessibility of a given standard cell library. We further propose novel pin access planning techniques and concurrent pin access optimizations to efficiently resolve the routing resource competitions, which generates much better routing solutions than state-of-the-art, manufacturing-friendly routers. To systematically improve the manufacturing yield in the post-routing stage, a global optimization engine has been introduced for redundant local-loop insertion considering advanced manufacturing constraints. Finally, we propose the first machine learning-based framework for fast yet consistent SRAF generation with the high quality of results.Electrical and Computer Engineerin

Electrical Design for Manufacturability Solutions: Fast Systematic Variation Analysis and Design Enhancement Techniques

The primary objectives in this research are to develop computer-aided design (CAD) tools for Design for Manufacturability (DFM) solutions that enable designers to conduct more rapid and more accurate systematic variation analysis, with different design enhancement techniques. Four main CAD tools are developed throughout my thesis. The first CAD tool facilitates a quantitative study of the impact of systematic variations for different circuits' electrical and geometrical behavior. This is accomplished by automatically performing an extensive analysis of different process variations (lithography and stress) and their dependency on the design context. Such a tool helps to explore and evaluate the systematic variation impact on any type of design. Secondly, solutions in the industry focus on the "design and then fix philosophy", or "fix during design philosophy", whereas the next CAD tool involves the "fix before design philosophy". Here, the standard cell library is characterized in different design contexts, different resolution enhancement techniques, and different process conditions, generating a fully DFM-aware standard cell library using a newly developed methodology that dramatically reduce the required number of silicon simulations. Several experiments are conducted on 65nm and 45nm designs, and demonstrate more robust and manufacturable designs that can be implemented by using the DFM-aware standard cell library. Thirdly, a novel electrical-aware hotspot detection solution is developed by using a device parameter-based matching technique since the state-of-the-art hotspot detection solutions are all geometrical based. This CAD tool proposes a new philosophy by detecting yield limiters, also known as hotspots, through the model parameters of the device, presented in the SPICE netlist. This novel hotspot detection methodology is tested and delivers extraordinary fast and accurate results. Finally, the existing DFM solutions, mainly address the digital designs. Process variations play an increasingly important role in the success of analog circuits. Knowledge of the parameter variances and their contribution patterns is crucial for a successful design process. This information is valuable to find solutions for many problems in design, design automation, testing, and fault tolerance. The fourth CAD solution, proposed in this thesis, introduces a variability-aware DFM solution that detects, analyze, and automatically correct hotspots for analog circuits

Algorithms for Cell Layout

Cell layout is a critical step in the design process of computer chips. A cell is a logic function or storage element implemented in CMOS technology by transistors connected with wires. As each cell is used many times on a chip, improvements of a single cell layout can have a large effect on the overall chip performance. In the past years increasing difficulty to manufacture small feature sizes has lead to growing complexity of design rules. Producing cell layouts which are compliant with design rules and at the same time optimized w.r.t. layout size has become a difficult task for human experts. In this thesis we present BonnCell, a cell layout generator which is able to fully automatically produce design rule compliant layouts. It is able to guarantee area minimality of its layouts for small and medium sized cells. For large cells it uses a heuristic which produces layouts with a significant area reduction compared to those created manually. The routing problem is based on the Vertex Disjoint Steiner Tree Packing Problem with a large number of additional design rules. In Chapter 4 we present the routing algorithm which is based on a mixed integer programming (MIP) formulation that guarantees compliance with all design rules. The algorithm can also handle instances in which only part of the transistors are placed to check whether this partial placement can be extended to a routable placement of all transistors. Chapter 5 contains the transistor placement algorithm. Based on a branch and bound approach, it places transistors in turn and achieves efficiency by pruning parts of the search tree which do not contain optimum solutions. One major contribution of this thesis is that BonnCell only outputs routable placements. Simply checking the routability for each full placement in the search tree is too slow in practice, therefore several speedup strategies are applied. Some cells are too large to be solved by a single call of the placement algorithm. In Chapter 7 we describe how these cells are split up into smaller subcells which are placed and routed individually and subsequently merged into a placement and routing of the original cell. Two approaches for dividing the original cell into subcells are presented, one based on estimating the subcell area and the other based on solving the Min Cut Linear Arrangement Problem. BonnCell has enabled our cooperation partner IBM to drastically improve their cell design and layout process. In particular, a team of human experts needed several weeks to find a layout for their largest cell, consisting of 128 transistors. BonnCell processed this cell without manual intervention in 3 days and its layout uses 15% less area than the layout found by the human experts