126 research outputs found
Cooperative control of relay based cellular networks
PhDThe increasing popularity of wireless communications and the higher data
requirements of new types of service lead to higher demands on wireless networks.
Relay based cellular networks have been seen as an effective way to meet usersâ
increased data rate requirements while still retaining the benefits of a cellular
structure. However, maximizing the probability of providing service and spectrum
efficiency are still major challenges for network operators and engineers because of
the heterogeneous traffic demands, hard-to-predict user movements and complex
traffic models.
In a mobile network, load balancing is recognised as an efficient way to increase
the utilization of limited frequency spectrum at reasonable costs. Cooperative
control based on geographic load balancing is employed to provide flexibility for
relay based cellular networks and to respond to changes in the environment.
According to the potential capability of existing antenna systems, adaptive radio
frequency domain control in the physical layer is explored to provide coverage at
the right place at the right time.
This thesis proposes several effective and efficient approaches to improve
spectrum efficiency using network wide optimization to coordinate the coverage
offered by different network components according to the antenna models and
relay station capability. The approaches include tilting of antenna sectors,
changing the power of omni-directional antennas, and changing the assignment of
relay stations to different base stations. Experiments show that the proposed
approaches offer significant improvements and robustness in heterogeneous traffic
scenarios and when the propagation environment changes. The issue of predicting
the consequence of cooperative decisions regarding antenna configurations when
applied in a realistic environment is described, and a coverage prediction model is
proposed. The consequences of applying changes to the antenna configuration on
handovers are analysed in detail. The performance evaluations are based on a
system level simulator in the context of Mobile WiMAX technology, but the
concepts apply more generally
Opportunities and Challenges in OFDMA-Based Cellular Relay Networks: A Radio Resource Management Perspective
The opportunities and flexibility in relay networks and orthogonal frequency-division multiple access (OFDMA) make the combination a suitable candidate network and air-interface technology for providing reliable and ubiquitous high-data-r
Project Final Report â FREEDOM ICT-248891
This document is the final publishable summary report of the objective and work carried out within the European Project FREEDOM, ICT-248891.This document is the final publishable summary report of the objective and work carried out within the European Project FREEDOM, ICT-248891.Preprin
Performance analysis of 4G wireless networks using system level simulator
Doutoramento em Engenharia ElectrotécnicaIn the last decade, mobile wireless communications have witnessed an explosive
growth in the userâs penetration rate and their widespread deployment around the
globe. In particular, a research topic of particular relevance in telecommunications
nowadays is related to the design and implementation of mobile communication
systems of 4th generation (4G). 4G networks will be characterized by the support
of multiple radio access technologies in a core network fully compliant with the
Internet Protocol (all IP paradigms). Such networks will sustain the stringent
quality of service (QoS) requirements and the expected high data rates from the
type of multimedia applications (i.e. YouTube and Skype) to be available in the
near future. Therefore, 4G wireless communications system will be of paramount
importance on the development of the information society in the near future.
As 4G wireless services will continue to increase, this will put more and more
pressure on the spectrum availability. There is a worldwide recognition that
methods of spectrum managements have reached their limit and are no longer
optimal, therefore new paradigms must be sought. Studies show that most of the
assigned spectrum is under-utilized, thus the problem in most cases is inefficient
spectrum management rather spectrum shortage. There are currently trends
towards a more liberalized approach of spectrum management, which are tightly
linked to what is commonly termed as Cognitive Radio (CR).
Furthermore, conventional deployment of 4G wireless systems (one BS in cell and
mobile deploy around it) are known to have problems in providing fairness (users
closer to the BS are more benefited relatively to the cell edge users) and in
covering some zones affected by shadowing, therefore the use of relays has been
proposed as a solution.
To evaluate and analyse the performances of 4G wireless systems software tools
are normally used. Software tools have become more and more mature in recent
years and their need to provide a high level evaluation of proposed algorithms and
protocols is now more important. The system level simulation (SLS) tools provide
a fundamental and flexible way to test all the envisioned algorithms and protocols
under realistic conditions, without the need to deal with the problems of live
networks or reduced scope prototypes. Furthermore, the tools allow network
designers a rapid collection of a wide range of performance metrics that are useful
for the analysis and optimization of different algorithms.
This dissertation proposes the design and implementation of conventional system
level simulator (SLS), which afterwards enhances for the 4G wireless technologies
namely cognitive Radios (IEEE802.22) and Relays (IEEE802.16j). SLS is then
used for the analysis of proposed algorithms and protocols.FC
Heterogeneous LTE/ Wi-Fi architecture for intelligent transportation systems
Intelligent Transportation Systems (ITS) make use of advanced technologies to enhance road safety and improve traffic efficiency. It is anticipated that ITS will play a vital future role in improving traffic efficiency, safety, comfort and emissions. In order to assist the passengers to travel safely, efficiently and conveniently, several application requirements have to be met simultaneously. In addition to the delivery of regular traffic and safety information, vehicular networks have been recently required to support infotainment services. Previous vehicular network designs and architectures do not satisfy this increasing traffic demand as they are setup for either voice or data traffic, which is not suitable for the transfer of vehicular traffic. This new requirement is one of the key drivers behind the need for new mobile wireless broadband architectures and technologies. For this purpose, this thesis proposes and investigates a heterogeneous IEEE 802.11 and LTE vehicular system that supports both infotainment and ITS traffic control data. IEEE 802.11g is used for V2V communications and as an on-board access network while, LTE is used for V2I communications. A performance simulation-based study is conducted to validate the feasibility of the proposed system in an urban vehicular environment. The system performance is evaluated in terms of data loss, data rate, delay and jitter. Several simulation scenarios are performed and evaluated. In the V2I-only scenario, the delay, jitter and data drops for both ITS and video traffic are within the acceptable limits, as defined by vehicular application requirements. Although a tendency of increase in video packet drops during handover from one eNodeB to another is observed yet, the attainable data loss rate is still below the defined benchmarks. In the integrated V2V-V2I scenario, data loss in uplink ITS traffic was initially observed so, Burst communication technique is applied to prevent packet losses in the critical uplink ITS traffic. A quantitative analysis is performed to determine the number of packets per burst, the inter-packet and inter-burst intervals. It is found that a substantial improvement is achieved using a two-packet Burst, where no packets are lost in the uplink direction. The delay, jitter and data drops for both uplink and downlink ITS traffic, and video traffic are below the benchmarks of vehicular applications. Thus, the results indicate that the proposed heterogeneous system offers acceptable performance that meets the requirements of the different vehicular applications. All simulations are conducted on OPNET Network Modeler and results are subjected to a 95% confidence analysis
Interference mitigation and interference avoidance for cellular OFDMA-TDD networks
In recent years, cellular systems based on orthogonal frequency division multiple access â time
division duplex (OFDMA-TDD) have gained considerable popularity. Two of the major reasons
for this are, on the one hand, that OFDMA enables the receiver to effectively cope with multipath
propagation while keeping the complexity low. On the other hand, TDD offers efficient
support for cell-specific uplink (UL)/downlink (DL) asymmetry demands by allowing each cell
to independently set its UL/DL switching point (SP). However, cell-independent SP gives rise
to crossed slots. In particular, crossed slots arise when neighbouring cells use the same slot in
opposing link directions, resulting in base station (BS)-to-BS interference and mobile station
(MS)-to-MS interference. BS-to-BS interference, in particular, can be quite detrimental due to
the exposed location of BSs, which leads to high probability of line-of-sight (LOS) conditions.
The aim of this thesis is to address the BS-to-BS interference problem in OFDMA-TDDcellular
networks. A simulation-based approach is used to demonstrate the severity of BS-to-BS interference
and a signal-to-interference-plus-noise ratio (SINR) equation for OFDMA is formulated
to aid system performance analysis. The detrimental effects of crossed slot interference in
OFDMA-TDD cellular networks are highlighted by comparing methods specifically targeting
the crossed slots interference problem. In particular, the interference avoidance method fixed
slot allocation (FSA) is compared against state of the art interference mitigation approaches,
viz: random time slot opposing (RTSO) and zone division (ZD). The comparison is done based
on Monte Carlo simulations and the main comparison metric is spectral efficiency calculated
using the SINR equation formulated in this thesis. The simulation results demonstrate that
when LOS conditions among BSs are present, both RTSO and ZD perform worse than FSA for
all considered performance metrics. It is concluded from the results that current interference
mitigation techniques do not offer an effective solution to the BS-to-BS interference problem.
Hence, new interference avoidance methods, which unlike FSA, do not sacrifice the advantages
of TDD are open research issues addressed in this thesis.
The major contribution of this thesis is a novel cooperative resource balancing technique that
offers a solution to the crossed slot problem. The novel concept, termed asymmetry balancing,
is targeted towards next-generation cellular systems, envisaged to have ad hoc and multi-hop
capabilities. Asymmetry balancing completely avoids crossed slots by keeping the TDD SPs
synchronised among BSs. At the same time, the advantages of TDD are retained, which is
enabled by introducing cooperation among the entities in the network. If a cell faces resource
shortage in one link direction, while having free resources in the opposite link direction, the
free resources can be used to support the overloaded link direction. In particular, traffic can
be offloaded to near-by mobile stations at neighbouring cells that have available resources. To
model the gains attained with asymmetry balancing, a mathematical framework is developed
which is verified by Monte Carlo simulations. In addition, asymmetry balancing is compared
against both ZD and FSA based on simulations and the results demonstrate the superior performance
of asymmetry balancing. It can be concluded that the novel interference avoidance
approach is a very promising candidate t
Cross layer optimization in 4G Wireless mesh networks
Wireless networks have been rapidly evolving over the past two decades. It is foreseen that Fourth generation (4G) wireless systems will involve the integration of wireless mesh networks and the 3G wireless systems such as WCDMA. Moreover their wireless mesh routers will provide service to wireless local networks (WLANs) and possibly incorporate MIMO system and smart admission control policies among others. This integration will not only help the service providers cost effectiveness and users connectivities but will also improve and guarantee the QoS criteria. On the other hand, cross layer design has emerged as a new and major thrust in improving the quality of service (QoS) of wireless networks. Cross layer design involves the interaction of various layers of the network hierarchy which could further improve the QoS of the 4G integrated networks. In this work we seek new techniques for improving the overall QoS of integrated 4G systems. Towards this objective we start with the local low tier WLAN access. We then investigate CDMA alternatives to the TDMA access for wireless mesh networks. Cross layer design in wireless mesh networks is then pursued. In the first phase of this thesis a new access mechanism for WLANs is developed, in which users use an optimum transmission probability obtained by estimating the number of stations from the traffic conditions in a sliding window fashion, thereby increasing the throughput compared to the standard DCF and RTS/CTS mechanism while maintaining the same fairness and the delay performance. In the second phase we introduce a code division multiple access/Time division duplex technique CDMA/TDD for wireless mesh networks, we outline the transmitter and receiver for the relay nodes and evaluate the efficiency, delay and delay jitter performances. This CDMA based technique is more amenable to integrating the two systems (Mesh networks and WCDMA or CDMA 2000 of3G). We compare these results with the TDMA operation and through analysis we prove that the CDMA system outperforms the TDMA counterparts. In the third phase we proceed to an instance of cross layer optimized networks, where we develop an overall optimization routine that finds simultaneously the best route and the best capacity allocation to various nodes. This optimization routine minimizes the average end to end packet delay over all calls subject to various contraints. In the process we use a new adaptive version of Spatial TDMA as a platform for comparison purposes of the MAC techniques involved in the cross layer design. In this phase we also combine CDMA/TDD and optimum routing for cross layer design in wireless mesh networks. We compare the results of the CDMA/TDD system with results obtained from the STDMA system. In our analysis we consider the parallel transmissions of mesh nodes in a mesh topology. These parallel transmissions will increase the capacity resulting in a higher throughput with a lower delay. This will allow the service providers to accommodate more users in their system which will obviously reduce the colt and the end users will enjoy a better service paying a lower amount
Recommended from our members
Design of interface selection protocols for multi-homed wireless networks
This thesis was submitted for the degree of Doctor of Philosophy and was awarded by Brunel University on 10 December 2010.The IEEE 802.11/802.16 standards conformant wireless communication stations have multi-homing transmission capability. To achieve greater communication efficiency, multi-homing capable stations use handover mechanism to select appropriate transmission channel according to variations in the channel quality. This thesis presents three internal-linked handover schemes, (1) Interface Selection Protocol (ISP), belonging to Wireless Local Area Network (WLAN)- Worldwide Interoperability for Microwave Access (WiMAX) environment (2) Fast Channel Scanning (FCS) and (3) Traffic Manager (TM), (2) and (3) belonging to WiMAX Environment. The proposed schemes in this thesis use a novel mechanism of providing a reliable communication route. This solution is based on a cross-layer communication framework, where the interface selection module uses various network related parameters from Medium Access Control (MAC) sub-layer/Physical Layer (PHY) across the protocol suite for decision making at the Network layer. The proposed solutions are highly responsive when compared with existing multi-homed schemes; responsiveness is one of the key factors in the design of such protocols. Selected route under these schemes is based on the most up to date link-layer information. Therefore, such a route is not only reliable in terms of route optimization but it also fulfils the application demands in terms of throughput and delay. Design of ISP protocol use probing frames during the route discovery process. The 802.11 mandates the use of different rates for data transmission frames. The ISP-metric can be incorporated into various routing aspects and its applicability is determined by the possibility of provision of MAC dependent parameters that are used to determine the best path metric values. In many cases, higher device density, interference and mobility cause variable medium access delays. It causes creation of âunreachable zonesâ, where destination is marked as unreachable. However, by use of the best path metric, the destination has been made reachable, anytime and anywhere, because of the intelligent use of the probing frames and interface selection algorithm implemented. The IEEE 802.16e introduces several MAC level queues for different access categories, maintaining service requirement within these queues; which imply that frames from a higher priority queue, i.e. video frames, are serviced more frequently than those belonging to lower priority queues. Such an enhancement at the MAC sub-layer introduces uneven queuing delays. Conventional routing protocols are unaware of such MAC specific constraints and as a result, these factors are not considered which result in channel performance degradation. To meet such challenges, the thesis presents FCS and TM schemes for WiMAX. For FCS, Its solution is to improve the mobile WiMAX handover and address the scanning latency. Since minimum scanning time is the most important issue in the handover process. This handover scheme aims to utilize the channel efficiently and apply such a procedure to reduce the time it takes to scan the neighboring access stations. TM uses MAC and physical layer (PHY) specific information in the interface metric and maintains a separate path to destination by applying an alternative interface operation. Simulation tests and comparisons with existing multi-homed protocols and handover schemes demonstrate the effectiveness of incorporating the medium dependent parameters. Moreover, show that suggested schemes, have shown better performance in terms of end-to-end delay and throughput, with efficiency up to 40% in specific test scenarios
- âŠ