532 research outputs found
Wavelength assignment in all-optical networks for mesh topologies
All-Optical Networks employing Dense Wavelength Division Multiplexing (DWDM) are believed to be the next generation networks that can meet the ever-increasing demand for bandwidth of the end users. This thesis presents some new heuristics for wavelength assignment and converter placement in mesh topologies. Our heuristics try to assign the wavelengths in an efficient manner that results in very low blocking probability. We propose novel static and dynamic assignment schemes that outperform the assignments reported in the literature even when converters are used. The proposed on-line scheme called Round-Robin assignment outperforms previously proposed strategies such as first-fit and random assignment schemes. The performance improvement obtained with the proposed static assignments is very significant when compared with the dynamic schemes. We designed and developed a simulator in the C language that supports the 2D mesh topology with DWDM. We ran extensive simulations and compared our heuristics with those reported in the literature. We have examined converter placement in mesh topologies and proposed that placing converters at the center yields better results than uniform placement when dimension order routing is employed. We introduced a new concept called wavelength assignment with second trial that results in extremely low blocking probabilities when compared to schemes based on a single trial. Our proposed schemes are simple to implement and do not add to the cost. Thus we conclude that wavelength assignment plays more significant role in affecting the blocking probability than wavelength converters. We further conclude that static schemes without converters could easily outperform dynamic schemes thus resulting in great savings
Logical topology design for IP rerouting: ASONs versus static OTNs
IP-based backbone networks are gradually moving to a network model consisting of high-speed routers that are flexibly interconnected by a mesh of light paths set up by an optical transport network that consists of wavelength division multiplexing (WDM) links and optical cross-connects. In such a model, the generalized MPLS protocol suite could provide the IP centric control plane component that will be used to deliver rapid and dynamic circuit provisioning of end-to-end optical light paths between the routers. This is called an automatic switched optical (transport) network (ASON). An ASON enables reconfiguration of the logical IP topology by setting up and tearing down light paths. This allows to up- or downgrade link capacities during a router failure to the capacities needed by the new routing of the affected traffic. Such survivability against (single) IP router failures is cost-effective, as capacity to the IP layer can be provided flexibly when necessary. We present and investigate a logical topology optimization problem that minimizes the total amount or cost of the needed resources (interfaces, wavelengths, WDM line-systems, amplifiers, etc.) in both the IP and the optical layer. A novel optimization aspect in this problem is the possibility, as a result of the ASON, to reuse the physical resources (like interface cards and WDM line-systems) over the different network states (the failure-free and all the router failure scenarios). We devised a simple optimization strategy to investigate the cost of the ASON approach and compare it with other schemes that survive single router failures
Methods and problems of wavelength-routing in all-optical networks
We give a survey of recent theoretical results obtained for wavelength-routing in all-optical networks. The survey is based on the previous survey in [Beauquier, B., Bermond, J-C., Gargano, L., Hell, P., Perennes, S., Vaccaro, U.: Graph problems arising from wavelength-routing in all-optical networks. In: Proc. of the 2nd Workshop on Optics and Computer Science, part of IPPS'97, 1997]. We focus our survey on the current research directions and on the used methods. We also state several open problems connected with this line of research, and give an overview of several related research directions
Optimization in Telecommunication Networks
Network design and network synthesis have been the classical optimization problems intelecommunication for a long time. In the recent past, there have been many technologicaldevelopments such as digitization of information, optical networks, internet, and wirelessnetworks. These developments have led to a series of new optimization problems. Thismanuscript gives an overview of the developments in solving both classical and moderntelecom optimization problems.We start with a short historical overview of the technological developments. Then,the classical (still actual) network design and synthesis problems are described with anemphasis on the latest developments on modelling and solving them. Classical results suchas Menger’s disjoint paths theorem, and Ford-Fulkerson’s max-flow-min-cut theorem, butalso Gomory-Hu trees and the Okamura-Seymour cut-condition, will be related to themodels described. Finally, we describe recent optimization problems such as routing andwavelength assignment, and grooming in optical networks.operations research and management science;
A heuristic for placement of limited range wavelength converters in all-optical networks
Wavelength routed optical networks have emerged as a technology that can effectively utilize the enormous bandwidth of the optical fiber. Wavelength converters play an important role in enhancing the fiber utilization and reducing the overall call blocking probability of the network. As the distortion of the optical signal increases with the increase in the range of wavelength conversion in optical wavelength converters, limited range wavelength conversion assumes importance. Placement of wavelength converters is a NP complete problem [K.C. Lee, V.O.K. Li, IEEE J. Lightwave Technol. 11 (1993) 962-970] in an arbitrary mesh network. In this paper, we investigate heuristics for placing limited range wavelength converters in arbitrary mesh wavelength routed optical networks. The objective is to achieve near optimal placement of limited range wavelength converters resulting in reduced blocking probabilities and low distortion of the optical signal. The proposed heuristic is to place limited range wavelength converters at the most congested nodes, nodes which lie on the long lightpaths and nodes where conversion of optical signals is significantly high. We observe that limited range converters at few nodes can provide almost the entire improvement in the blocking probability as the full range wavelength converters placed at all the nodes. Congestion control in the network is brought about by dynamically adjusting the weights of the channels in the link thereby balancing the load and reducing the average delay of the traffic in the entire network. Simulations have been carried out on a 12-node ring network, 14-node NSFNET, 19-node European Optical Network (EON), 28-node US long haul network, hypothetical 30-node INET network and the results agree with the analysis. (C) 2001 Elsevier Science B.V, All rights reserved
A Shared Backup Path Protection Scheme for Optical Mesh Networks
We propose a new heuristic ILP model for share backup path protection (SBPP) scheme of mesh networks, which used the sets of disjoint-joint primary-backup path candidates of using path-pair candidates. The solution of the model is near optimal and provides all the routing details of demands as well as the sharing information between backup paths, and also simplifies the wavelength assignment problem if the wavelength continuity is a consideration. The new entities are introduced into this model that allow to control the resource utilization as well as congestion level of the network for optimization purposes and the pre-processing of data offers more control in properties of the path candidate
Virtualisation and resource allocation in MECEnabled metro optical networks
The appearance of new network services and the ever-increasing network traffic and number
of connected devices will push the evolution of current communication networks towards the
Future Internet.
In the area of optical networks, wavelength routed optical networks (WRONs) are evolving
to elastic optical networks (EONs) in which, thanks to the use of OFDM or Nyquist WDM,
it is possible to create super-channels with custom-size bandwidth. The basic element in
these networks is the lightpath, i.e., all-optical circuits between two network nodes. The
establishment of lightpaths requires the selection of the route that they will follow and the
portion of the spectrum to be used in order to carry the requested traffic from the source to
the destination node. That problem is known as the routing and spectrum assignment (RSA)
problem, and new algorithms must be proposed to address this design problem.
Some early studies on elastic optical networks studied gridless scenarios, in which a slice
of spectrum of variable size is assigned to a request. However, the most common approach to
the spectrum allocation is to divide the spectrum into slots of fixed width and allocate multiple,
consecutive spectrum slots to each lightpath, depending on the requested bandwidth. Moreover,
EONs also allow the proposal of more flexible routing and spectrum assignment techniques,
like the split-spectrum approach in which the request is divided into multiple "sub-lightpaths".
In this thesis, four RSA algorithms are proposed combining two different levels of
flexibility with the well-known k-shortest paths and first fit heuristics. After comparing the
performance of those methods, a novel spectrum assignment technique, Best Gap, is proposed
to overcome the inefficiencies emerged when combining the first fit heuristic with highly
flexible networks. A simulation study is presented to demonstrate that, thanks to the use of
Best Gap, EONs can exploit the network flexibility and reduce the blocking ratio.
On the other hand, operators must face profound architectural changes to increase the
adaptability and flexibility of networks and ease their management. Thanks to the use of
network function virtualisation (NFV), the necessary network functions that must be applied
to offer a service can be deployed as virtual appliances hosted by commodity servers, which
can be located in data centres, network nodes or even end-user premises. The appearance of
new computation and networking paradigms, like multi-access edge computing (MEC), may
facilitate the adaptation of communication networks to the new demands. Furthermore, the
use of MEC technology will enable the possibility of installing those virtual network functions
(VNFs) not only at data centres (DCs) and central offices (COs), traditional hosts of VFNs, but
also at the edge nodes of the network. Since data processing is performed closer to the enduser,
the latency associated to each service connection request can be reduced. MEC nodes
will be usually connected between them and with the DCs and COs by optical networks.
In such a scenario, deploying a network service requires completing two phases: the
VNF-placement, i.e., deciding the number and location of VNFs, and the VNF-chaining,
i.e., connecting the VNFs that the traffic associated to a service must transverse in order to
establish the connection. In the chaining process, not only the existence of VNFs with available
processing capacity, but the availability of network resources must be taken into account to
avoid the rejection of the connection request. Taking into consideration that the backhaul of
this scenario will be usually based on WRONs or EONs, it is necessary to design the virtual
topology (i.e., the set of lightpaths established in the networks) in order to transport the tra c
from one node to another. The process of designing the virtual topology includes deciding the
number of connections or lightpaths, allocating them a route and spectral resources, and finally
grooming the traffic into the created lightpaths.
Lastly, a failure in the equipment of a node in an NFV environment can cause the
disruption of the SCs traversing the node. This can cause the loss of huge amounts of data
and affect thousands of end-users. In consequence, it is key to provide the network with faultmanagement
techniques able to guarantee the resilience of the established connections when a
node fails.
For the mentioned reasons, it is necessary to design orchestration algorithms which solve
the VNF-placement, chaining and network resource allocation problems in 5G networks
with optical backhaul. Moreover, some versions of those algorithms must also implements
protection techniques to guarantee the resilience system in case of failure.
This thesis makes contribution in that line. Firstly, a genetic algorithm is proposed to solve
the VNF-placement and VNF-chaining problems in a 5G network with optical backhaul based
on star topology: GASM (genetic algorithm for effective service mapping). Then, we propose
a modification of that algorithm in order to be applied to dynamic scenarios in which the
reconfiguration of the planning is allowed. Furthermore, we enhanced the modified algorithm
to include a learning step, with the objective of improving the performance of the algorithm.
In this thesis, we also propose an algorithm to solve not only the VNF-placement and
VNF-chaining problems but also the design of the virtual topology, considering that a WRON
is deployed as the backhaul network connecting MEC nodes and CO. Moreover, a version
including individual VNF protection against node failure has been also proposed and the
effect of using shared/dedicated and end-to-end SC/individual VNF protection schemes are
also analysed.
Finally, a new algorithm that solves the VNF-placement and chaining problems and
the virtual topology design implementing a new chaining technique is also proposed.
Its corresponding versions implementing individual VNF protection are also presented.
Furthermore, since the method works with any type of WDM mesh topologies, a technoeconomic
study is presented to compare the effect of using different network topologies in
both the network performance and cost.Departamento de Teoría de la Señal y Comunicaciones e Ingeniería TelemáticaDoctorado en Tecnologías de la Información y las Telecomunicacione
Monitoring trail: on fast link failure localization in all-optical WDM mesh networks
We consider an optical layer monitoring mechanism for fast link failure localization in all-optical wavelength-division-multiplexing (WDM) mesh networks. A novel framework of all-optical monitoring, called monitoring trail (m-trail), is introduced. It differs from the existing monitoring cycle (m-cycle) method by removing the cycle constraint. As a result, m-trail provides a general all-optical monitoring structure, which includes simple, nonsimple m-cycles, and open trails as special cases. Based on an in-depth theoretical analysis, we formulate an efficient integer linear program (ILP) for m-trail design to achieve unambiguous localization of each link failure. The objective is to minimize the monitoring cost (i.e., monitor cost plus bandwidth cost) of all m-trails in the solution. Numerical results show that the proposed m-trail scheme significantly outperforms its m-cycle-based counterpart.published_or_final_versio
- …