Optimising lower layers of the protocol stack to improve communication performance in a wireless temperature sensor network

The function of wireless sensor networks is to monitor events or gather information and report the information to a sink node, a central location or a base station. It is a requirement that the information is transmitted through the network efficiently. Wireless communication is the main activity that consumes energy in wireless sensor networks through idle listening, overhearing, interference and collision. It becomes essential to limit energy usage while maintaining communication between the sensor nodes and the sink node as the nodes die after the battery has been exhausted. Thus, conserving energy in a wireless sensor network is of utmost importance. Numerous methods to decrease energy expenditure and extend the lifetime of the network have been proposed. Researchers have devised methods to efficiently utilise the limited energy available for wireless sensor networks by optimising the design parameters and protocols. Cross-layer optimisation is an approach that has been employed to improve wireless communication. The essence of cross-layer scheme is to optimise the exchange and control of data between two or more layers to improve efficiency. The number of transmissions is therefore a vital element in evaluating overall energy usage. In this dissertation, a Markov Chain model was employed to analyse the tuning of two layers of the protocol stack, namely the Physical Layer (PHY) and Media Access Control layer (MAC), to find possible energy gains. The study was conducted utilising the IEEE 802.11 channel, SensorMAC (SMAC) and Slotted-Aloha (S-Aloha) medium access protocols in a star topology Wireless Temperature Sensor Network (WTSN). The research explored the prospective energy gains that could be realised through optimizing the Forward Error Correction (FEC) rate. Different Reed Solomon codes were analysed to explore the effect of protocol tuning on energy efficiency, namely transmission power, modulation method, and channel access. The case where no FEC code was used and analysed as the control condition. A MATLAB simulation model was used to identify the statistics of collisions, overall packets transmitted, as well as the total number of slots used during the transmission phase. The bit error probability results computed analytically were utilised in the simulation model to measure the probability of successful transmitting data in the physical layer. The analytical values and the simulation results were compared to corroborate the correctness of the models. The results indicate that energy gains can be accomplished by the suggested layer tuning approach.Electrical and Mining EngineeringM. Tech. (Electrical Engineering

Intelligent Medium Access Control Protocols for Wireless Sensor Networks

The main contribution of this thesis is to present the design and evaluation of intelligent MAC protocols for Wireless Sensor Networks (WSNs). The objective of this research is to improve the channel utilisation of WSNs while providing flexibility and simplicity in channel access. As WSNs become an efficient tool for recognising and collecting various types of information from the physical world, sensor nodes are expected to be deployed in diverse geographical environments including volcanoes, jungles, and even rivers. Consequently, the requirements for the flexibility of deployment, the simplicity of maintenance, and system self-organisation are put into a higher level. A recently developed reinforcement learning-based MAC scheme referred as ALOHA-Q is adopted as the baseline MAC scheme in this thesis due to its intelligent collision avoidance feature, on-demand transmission strategy and relatively simple operation mechanism. Previous studies have shown that the reinforcement learning technique can considerably improve the system throughput and significantly reduce the probability of packet collisions. However, the implementation of reinforcement learning is based on assumptions about a number of critical network parameters. That impedes the usability of ALOHA-Q. To overcome the challenges in realistic scenarios, this thesis proposes numerous novel schemes and techniques. Two types of frame size evaluation schemes are designed to deal with the uncertainty of node population in single-hop systems, and the unpredictability of radio interference and node distribution in multi-hop systems. A slot swapping techniques is developed to solve the hidden node issue of multi-hop networks. Moreover, an intelligent frame adaptation scheme is introduced to assist sensor nodes to achieve collision-free scheduling in cross chain networks. The combination of these individual contributions forms state of the art MAC protocols, which offers a simple, intelligent and distributed solution to improving the channel utilisation and extend the lifetime of WSNs

EC-CENTRIC: An Energy- and Context-Centric Perspective on IoT Systems and Protocol Design

The radio transceiver of an IoT device is often where most of the energy is consumed. For this reason, most research so far has focused on low power circuit and energy efficient physical layer designs, with the goal of reducing the average energy per information bit required for communication. While these efforts are valuable per se, their actual effectiveness can be partially neutralized by ill-designed network, processing and resource management solutions, which can become a primary factor of performance degradation, in terms of throughput, responsiveness and energy efficiency. The objective of this paper is to describe an energy-centric and context-aware optimization framework that accounts for the energy impact of the fundamental functionalities of an IoT system and that proceeds along three main technical thrusts: 1) balancing signal-dependent processing techniques (compression and feature extraction) and communication tasks; 2) jointly designing channel access and routing protocols to maximize the network lifetime; 3) providing self-adaptability to different operating conditions through the adoption of suitable learning architectures and of flexible/reconfigurable algorithms and protocols. After discussing this framework, we present some preliminary results that validate the effectiveness of our proposed line of action, and show how the use of adaptive signal processing and channel access techniques allows an IoT network to dynamically tune lifetime for signal distortion, according to the requirements dictated by the application

Diseños de capa cruzada para redes inalámbricas de área corporal energéticamente eficientes: una revisión

RESUMEN: El diseño de capa cruzada se considera una poderosa alternativa para dar solución a las complejidades introducidas por las comunicaciones inalámbricas en redes de área corporal (WBAN), donde el modelo clásico de comunicaciones no ha exhibido un desempeño adecuado. Respecto al problema puntual de consumo de energía, hemos preparado la presente revisión de las publicaciones más relevantes que tratan la eficiencia energética para WBAN usando diseño de capa cruzada. En este artículo se proporciona una revisión exhaustiva de los avances en aproximaciones, protocolos y optimizaciones de capa cruzada cuyo objetivo es incrementar el tiempo de vida de las redes WBAN mediante el ahorro de energía. Luego, se discute los aspectos relevantes y deficiencias de las técnicas de capa cruzada energéticamente eficientes. Además, se introducen aspectos de investigación abiertos y retos en el diseño de capa cruzada para WBAN. En esta revisión proponemos una taxonomía de las aproximaciones de capa cruzada, de modo que las técnicas revisadas se ajustan en categorías de acuerdo a los protocolos involucrados en el diseño. Una clasificación novedosa se incluye para hacer claridad en los conceptos teóricos involucrados en cada esquema de capa cruzada y para luego agrupar aproximaciones similares evidenciando las diferencias con otras técnicas entre sí. Nuestras conclusiones consideran los aspectos de movilidad y modelamiento del canal en escenarios de WBAN como las direcciones para futura investigación en WBAN y en aplicaciones de telemedicina.ABSTRACT: Cross-layer design is considered a powerful alternative to solve the complexities of wireless communication in wireless body area networks (WBAN), where the classical communication model has been shown to be inaccurate. Regarding the energy consumption problem, we have prepared a current survey of the most relevant scientific publications on energy-efficient cross-layer design for WBAN. In this paper, we provide a comprehensive review of the advances in cross-layer approaches, protocols and optimizations aimed at increasing the network lifetime by saving energy in WBANs. Subsequently, we discuss the relevant aspects and shortcomings of these energy-efficient cross-layer techniques and point out the open research issues and challenges in WBAN cross-layer design. In this survey, we propose a taxonomy for cross-layer approaches to fit them into categories based on the protocols involved in the cross-layer scheme. A novel classification is included to clarify the theoretical concepts behind each cross-layer scheme; and to group similar approaches by establishing their differences from the other strategies reviewed. Our conclusion considers the aspects of mobility and channel modeling in WBAN scenarios as the directions of future cross-layer research for WBAN and telemedicine applications

A New MAC Approach in Wireless Body Sensor Networks for Health Care

Postprint (published version

Actas da 10ª Conferência sobre Redes de Computadores

Universidade do MinhoCCTCCentro AlgoritmiCisco SystemsIEEE Portugal Sectio

Towards zero-power wireless machine-to-machine networks

This thesis aims at contributing to overcome two of the main challenges for the deployment of M2M networks in data collection scenarios for the Internet of Things: the management of massive numbers of end-devices that attempt to get access to the channel; and the need to extend the network lifetime. In order to solve these challenges, two complementary strategies are considered. Firstly, the thesis focuses on the design, analysis and performance evaluation of MAC protocols that can handle abrupt transitions in the traffic load and minimize the energy consumption devoted to communications. And secondly, the use of energy harvesting (EH) is considered in order to provide the network with unlimited lifetime. To this end, the second part of the thesis focuses on the design and analysis of EH-aware MAC protocols. While the Frame Slotted-ALOHA (FSA) protocol has been traditionally adopted in star topology networks for data collection, results show that FSA-based protocols lack of scalability and present synchronization problems as the network density increases. Indeed, the frame length of FSA must be adjusted to the number of contenders, which may be complex to attain in dense networks with large and dynamic number of end-devices. In order to overcome these issues, a tree splitting-based random access protocol, referred to as Low Power Contention Tree-based Access (LP-CTA), is proposed in the first part of this thesis. In LP-CTA, the frame length can be very short and fixed, which facilitates synchronization and provides better network scalability than FSA. While LP-CTA uses data slots for contention, it is possible to use short access requests in minislots, where collisions are resolved using tree splitting, and avoid the contention in data. Since these minislots can be much shorter than the duration of a data packet, the performance can be improved. The Low Power Distributed Queuing (LP-DQ) protocol proposed in this thesis is based on this idea. LP-DQ combines tree splitting with the logic of two distributed queues that manage the contention resolution and the collision-free data transmission. Results show that LP-DQ outperforms LP-CTA and FSA in terms of delay and energy efficiency, and it relaxes the need to know the size of the network and adapts smoothly to any change in the number of end-devices. The approach of LP-DQ is convenient when the messages transmitted by each end-device fit in one single slot, however, if the end-devices generate long messages that have to be fragmented, it is better to add a reservation mechanism in order to boost the performance. In this sense, the LPR-DQ protocol is proposed as an extension of LP-DQ where the concept of reservation is integrated to allow the end-devices reserve as many collision-free slots as needed. The second part of the thesis is devoted to the integration of the MAC layer with the use of energy harvesting. The variability and fluctuations of the harvested energy is considered for the design of EH-aware MAC protocols and three performance metrics are proposed: the probability of delivery, the data delivery ratio and the time efficiency. Previous works on data collection networks with EH focus on DFSA. In this thesis, the EH-CTA protocol is proposed as an adaptation of LP-CTA that takes the energy harvesting process into account. Results show that EH-CTA outperforms DFSA if the energy threshold for an end-device to become active is properly configured. In addition, while DFSA needs to adapt the frame length dynamically, EH-CTA uses a fixed frame length, thus facilitating scalability and synchronization. Finally, the EH-RDFSA and EH-DQ protocols are proposed for scenarios where data must be fragmented. EH-RDFSA is a combination of RFSA and DFSA, and EH-DQ is an extension of LPR-DQ.Esta tesis contribuye a resolver dos de los retos para el despliegue de redes M2M en escenarios de recolección de datos para el Internet de las Cosas: la gestión del acceso al canal de un número masivo de dispositivos; y la necesidad de extender la vida de la red. Para resolverlos se consideran dos estrategias complementarias. En primer lugar, se centra en el diseño, el análisis y la evaluación de protocolos MAC que pueden manejar transiciones abruptas de tráfico y reducen el consumo de energía. Y en segundo lugar, se considera el uso de mecanismos de captura de energía (Energy Harvesters, EH) para ofrecer un tiempo de vida ilimitado de la red. Con este fin, la segunda parte de la tesis se centra en el diseño y el análisis de protocolos MAC de tipo "EH-aware". Mientras que Frame Slotted-ALOHA (FSA) ha sido tradicionalmente adoptado en aplicaciones de recolección de datos, los resultados muestran que FSA presenta problemas de escalabilidad y sincronización cuando aumenta la densidad de la red. De hecho, la longitud de trama de FSA se debe ajustar según sea el número de dispositivos, lo cual puede ser difícil de estimar en redes con un número elevado y dinámico de dispositivos. Para superar estos problemas, en esta tesis se propone un protocolo de acceso aleatorio basado en "tree-splitting" denominado Low Power Contention Tree-based Access (LP-CTA). En LP-CTA, la longitud de trama puede ser corta y constante, lo cual facilita la sincronización y proporciona mejor escalabilidad. Mientras que LP-CTA utiliza paquetes de datos para la contienda, es posible utilizar solicitudes de acceso en mini-slots, donde las colisiones se resuelven utilizando "tree-splitting", y evitar la contención en los datos. Dado que estos mini-slots pueden ser mucho más cortos que la duración de un slot de datos, el rendimiento de LP-CTA puede ser mejorado. El protocolo Low Power Distributed Queuing (LP-DQ) propuesto en esta tesis se basa en esta idea. LP-DQ combina "tree-splitting" con la lógica de dos colas distribuidas que gestionan la resolución de la contienda en la solicitud de acceso y la transmisión de datos libre de colisiones. Los resultados demuestran que LP-DQ mejora LP-CTA y FSA en términos de retardo y eficiencia energética, LP-DQ no requiere conocer el tamaño de la red y se adapta sin problemas a cualquier cambio en el número de dispositivos. LP-DQ es conveniente cuando los mensajes transmitidos por cada dispositivo caben en un único slot de datos, sin embargo, si los dispositivos generan mensajes largos que requieren fragmentación, es mejor añadir un mecanismo de reserva para aumentar el rendimiento. En este sentido, el protocolo LPR-DQ se propone como una extensión de LP-DQ que incluye un mecanismo de reserva para permitir que cada dispositivo reserve el número de slots de datos según sea el número de fragmentos por mensaje. La segunda parte de la tesis está dedicada a la integración de la capa MAC con el uso de "Energy Harvesters". La variabilidad y las fluctuaciones de la energía capturada se consideran para el diseño de protocolos MAC de tipo "EH-aware" y se proponen tres métricas de rendimiento: la probabilidad de entrega, el "Data Delivery Ratio" y la eficiencia temporal. Los trabajos previos en redes de recolección de datos con EH se centran principalmente en DFSA. En esta tesis, el protocolo EH-CTA se propone como una adaptación de LP-CTA que tiene en cuenta el proceso de captura de energía. Los resultados muestran que EH-CTA supera DFSA si el umbral de energía para que un dispositivo se active está configurado correctamente. Además, mientras que en DFSA se necesita adaptar la longitud de trama de forma dinámica, EH-CTA utiliza una longitud de trama fija, facilitando así la escalabilidad y la sincronización. Por último, se proponen los protocolos EH-RDFSA y EH-DQ para escenarios en los que los datos deben ser fragmentados. EH-RDFSA es una combinación de RFSA y DFSA, y EH-DQ es una extensión de LPR-DQ.Aquesta tesi contribueix a resoldre dos dels reptes per al desplegament de xarxes M2M en escenaris de recol·lecció de dades per a l'Internet de les Coses: la gestió de l'accés al canal d'un nombre massiu de dispositius; i la necessitat d'extendre la vida de la xarxa. Per resoldre'ls es consideren dues estratègies complementàries. En primer lloc, es centra en el disseny, l'anàlisi i l'avaluació de protocols MAC que poden manegar transicions abruptes de trànsit i redueixen el consum d'energia. I en segon lloc, es considera l'ús de mecanismes de captura d'energia (Energy Harvesters, EH) per a oferir un temps de vida il·limitat de la xarxa. Amb aquesta finalitat, la segona part de la tesi es centra en el disseny i l'anàlisi de protocols MAC de tipus "EH-aware".Mentre que Frame Slotted-ALOHA (FSA) ha estat tradicionalment adoptat en aplicacions de recol·lecció de dades, els resultats mostren que FSA presenta problemes d'escalabilitat i sincronització quan augmenta la densitat de la xarxa. De fet, la longitud de trama de FSA s'ha d'ajustar segons sigui el nombre de dispositius, la qual cosa pot ser difícil d'estimar en xarxes amb un nombre elevat i dinàmic de dispositius. Per superar aquests problemes, en aquesta tesi es proposa un protocol d'accés aleatori basat en "tree-splitting" denominat Low Power Contention Tree-based Access (LP-CTA). En LP-CTA, la longitud de trama pot ser curta i constant, la qual cosa facilita la sincronització i proporciona millor escalabilitat.Mentre que LP-CTA utilitza paquets de dades per a la contenció, és possible utilitzar sol·licituds d'accés a mini-slots, on les col·lisions es resolen utilitzant "tree-splitting", i evitar la contenció a les dades. Atès que aquests mini-slots poden ser molt més curts que la durada d'un slot de dades, el rendiment de LP-CTA pot ser millorat. El protocol Low Power Distributed Queuing (LP-DQ) proposat en aquesta tesi es basa en aquesta idea. LP-DQ combina "tree-splitting" amb la lògica de dues cues distribuïdes que gestionen la resolució de la contenció en la sol·licitud d'accés i la transmissió de dades lliure de col·lisions. Els resultats demostren que LP-DQ millora LP-CTA i FSA en termes de retard i eficiència energètica, LP-DQ no requereix conèixer la mida de la xarxa i s'adapta sense problemes a qualsevol canvi en el nombre de dispositius.LP-DQ és convenient quan els missatges transmesos per cada dispositiu caben en un únic slot de dades, però, si els dispositius generen missatges llargs que requereixen fragmentació, és millor afegir un mecanisme de reserva per augmentar el rendiment. En aquest sentit, el protocol LPR-DQ es proposa com una extensió de LP-DQ que inclou un mecanisme de reserva per a permetre que cada dispositiu reservi el nombre de slots de dades segons sigui el nombre de fragments per missatge.La segona part de la tesi està dedicada a la integració de la capa MAC amb l'ús de "Energy Harvesters". La variabilitat i les fluctuacions de l'energia capturada es consideren per al disseny de protocols MAC de tipus "EH-aware" i es proposen tres mètriques de rendiment: la probabilitat d'entrega, el "Data Delivery Ratio" i l'eficiència temporal.Els treballs previs en xarxes de recol·lecció de dades amb EH se centren principalment en DFSA. En aquesta tesi, el protocol EH-CTA es proposa com una adaptació de LP-CTA que té en compte el procés de captura d'energia. Els resultats mostren que EH-CTA supera DFSA si el llindar d'energia perquè un dispositiu s'activi s'ajusta correctament. A més, mentre que a DFSA es necessita adaptar la longitud de trama de forma dinàmica, EH-CTA utilitza una longitud de trama fixa, facilitant així l'escalabilitat i la sincronització. Finalment, es proposen els protocols EH-RDFSA i EH-DQ per a escenaris en els quals les dades han de ser fragmentades. EH-RDFSA és una combinació de RFSA i DFSA, i EH-DQ és una extensió de LPR-DQ.Postprint (published version

Cognitive MAC protocols for mobile Ad-Hoc networks

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.The term of Cognitive Radio (CR) used to indicate that spectrum radio could be accessed dynamically and opportunistically by unlicensed users. In CR Networks, Interference between nodes, hidden terminal problem, and spectrum sensing errors are big issues to be widely discussed in the research field nowadays. To improve the performance of such kind of networks, this thesis proposes Cognitive Medium Access Control (MAC) protocols for Mobile Ad-Hoc Networks (MANETs). From the concept of CR, this thesis has been able to develop a cognitive MAC framework in which a cognitive process consisting of cognitive elements is considered, which can make efficient decisions to optimise the CR network. In this context, three different scenarios to maximize the secondary user's throughput have been proposed. We found that the throughput improvement depends on the transition probabilities. However, considering the past information state of the spectrum can dramatically increases the secondary user's throughput by up to 40%. Moreover, by increasing the number of channels, the throughput of the network can be improved about 25%. Furthermore, to study the impact of Physical (PHY) Layer errors on cognitive MAC layer in MANETs, in this thesis, a Sensing Error-Aware MAC protocols for MANETs has been proposed. The developed model has been able to improve the MAC layer performance under the challenge of sensing errors. In this context, the proposed model examined two sensing error probabilities: the false alarm probability and the missed detection probability. The simulation results have shown that both probabilities could be adapted to maintain the false alarm probability at certain values to achieve good results. Finally, in this thesis, a cooperative sensing scheme with interference mitigation for Cognitive Wireless Mesh Networks (CogMesh) has been proposed. Moreover, a prioritybased traffic scenario to analyze the problem of packet delay and a novel technique for dynamic channel allocation in CogMesh is presented. Considering each channel in the system as a sub-server, the average delay of the users' packets is reduced and the cooperative sensing scenario dramatically increases the network throughput 50% more as the number of arrival rate is increased