Latency reduction by dynamic channel estimator selection in C-RAN networks using fuzzy logic

Due to a dramatic increase in the number of mobile users, operators are forced to expand their networks accordingly. Cloud Radio Access Network (C-RAN) was introduced to tackle the problems of the current generation of mobile networks and to support future 5G networks. However, many challenges have arisen through the centralised structure of C-RAN. The accuracy of the channel state information acquisition in the C-RAN for large numbers of remote radio heads and user equipment is one of the main challenges in this architecture. In order to minimize the time required to acquire the channel information in C-RAN and to reduce the end-to-end latency, in this paper a dynamic channel estimator selection algorithm is proposed. The idea is to assign different channel estimation algorithms to the users of mobile networks based on their link status (particularly the SNR threshold). For the purpose of automatic and adaptive selection to channel estimators, a fuzzy logic algorithm is employed as a decision maker to select the best SNR threshold by utilising the bit error rate measurements. The results demonstrate a reduction in the estimation time with low loss in data throughput. It is also observed that the outcome of the proposed algorithm increases at high SNR values

Energy Efficient Cloud Computing Based Radio Access Networks in 5G. Design and evaluation of an energy aware 5G cloud radio access networks framework using base station sleeping, cloud computing based workload consolidation and mobile edge computing

Fifth Generation (5G) cellular networks will experience a thousand-fold increase in data traffic with over 100 billion connected devices by 2020. In order to support this skyrocketing traffic demand, smaller base stations (BSs) are deployed to increase capacity. However, more BSs increase energy consumption which contributes to operational expenditure (OPEX) and CO2 emissions. Also, an introduction of a plethora of 5G applications running in the mobile devices cause a significant amount of energy consumption in the mobile devices. This thesis presents a novel framework for energy efficiency in 5G cloud radio access networks (C-RAN) by leveraging cloud computing technology. Energy efficiency is achieved in three ways; (i) at the radio side of H-C-RAN (Heterogeneous C-RAN), a dynamic BS switching off algorithm is proposed to minimise energy consumption while maintaining Quality of Service (QoS), (ii) in the BS cloud, baseband workload consolidation schemes are proposed based on simulated annealing and genetic algorithms to minimise energy consumption in the cloud, where also advanced fuzzy based admission control with pre-emption is implemented to improve QoS and resource utilisation (iii) at the mobile device side, Mobile Edge Computing (MEC) is used where computer intensive tasks from the mobile device are executed in the MEC server in the cloud. The simulation results show that the proposed framework effectively reduced energy consumption by up to 48% within RAN and 57% in the mobile devices, and improved network energy efficiency by a factor of 10, network throughput by a factor of 2.7 and resource utilisation by 54% while maintaining QoS

High-Performance Modelling and Simulation for Big Data Applications

This open access book was prepared as a Final Publication of the COST Action IC1406 “High-Performance Modelling and Simulation for Big Data Applications (cHiPSet)“ project. Long considered important pillars of the scientific method, Modelling and Simulation have evolved from traditional discrete numerical methods to complex data-intensive continuous analytical optimisations. Resolution, scale, and accuracy have become essential to predict and analyse natural and complex systems in science and engineering. When their level of abstraction raises to have a better discernment of the domain at hand, their representation gets increasingly demanding for computational and data resources. On the other hand, High Performance Computing typically entails the effective use of parallel and distributed processing units coupled with efficient storage, communication and visualisation systems to underpin complex data-intensive applications in distinct scientific and technical domains. It is then arguably required to have a seamless interaction of High Performance Computing with Modelling and Simulation in order to store, compute, analyse, and visualise large data sets in science and engineering. Funded by the European Commission, cHiPSet has provided a dynamic trans-European forum for their members and distinguished guests to openly discuss novel perspectives and topics of interests for these two communities. This cHiPSet compendium presents a set of selected case studies related to healthcare, biological data, computational advertising, multimedia, finance, bioinformatics, and telecommunications

Telecommunication Systems

This book is based on both industrial and academic research efforts in which a number of recent advancements and rare insights into telecommunication systems are well presented. The volume is organized into four parts: "Telecommunication Protocol, Optimization, and Security Frameworks", "Next-Generation Optical Access Technologies", "Convergence of Wireless-Optical Networks" and "Advanced Relay and Antenna Systems for Smart Networks." Chapters within these parts are self-contained and cross-referenced to facilitate further study

High-Performance Modelling and Simulation for Big Data Applications

This open access book was prepared as a Final Publication of the COST Action IC1406 “High-Performance Modelling and Simulation for Big Data Applications (cHiPSet)“ project. Long considered important pillars of the scientific method, Modelling and Simulation have evolved from traditional discrete numerical methods to complex data-intensive continuous analytical optimisations. Resolution, scale, and accuracy have become essential to predict and analyse natural and complex systems in science and engineering. When their level of abstraction raises to have a better discernment of the domain at hand, their representation gets increasingly demanding for computational and data resources. On the other hand, High Performance Computing typically entails the effective use of parallel and distributed processing units coupled with efficient storage, communication and visualisation systems to underpin complex data-intensive applications in distinct scientific and technical domains. It is then arguably required to have a seamless interaction of High Performance Computing with Modelling and Simulation in order to store, compute, analyse, and visualise large data sets in science and engineering. Funded by the European Commission, cHiPSet has provided a dynamic trans-European forum for their members and distinguished guests to openly discuss novel perspectives and topics of interests for these two communities. This cHiPSet compendium presents a set of selected case studies related to healthcare, biological data, computational advertising, multimedia, finance, bioinformatics, and telecommunications

D4.3 Final Report on Network-Level Solutions

Research activities in METIS reported in this document focus on proposing solutions to the network-level challenges of future wireless communication networks. Thereby, a large variety of scenarios is considered and a set of technical concepts is proposed to serve the needs envisioned for the 2020 and beyond. This document provides the final findings on several network-level aspects and groups of solutions that are considered essential for designing future 5G solutions. Specifically, it elaborates on: -Interference management and resource allocation schemes -Mobility management and robustness enhancements -Context aware approaches -D2D and V2X mechanisms -Technology components focused on clustering -Dynamic reconfiguration enablers These novel network-level technology concepts are evaluated against requirements defined by METIS for future 5G systems. Moreover, functional enablers which can support the solutions mentioned aboveare proposed. We find that the network level solutions and technology components developed during the course of METIS complement the lower layer technology components and thereby effectively contribute to meeting 5G requirements and targets.Aydin, O.; Valentin, S.; Ren, Z.; Botsov, M.; Lakshmana, TR.; Sui, Y.; Sun, W.... (2015). D4.3 Final Report on Network-Level Solutions. http://hdl.handle.net/10251/7675

Adaptive Energy Saving and Mobility Support IPv6 Routing Protocol in Low-Power and Lossy Networks for Internet of Things and Wireless Sensor Networks

Internet of Things (IoT) is an interconnection of physical objects that can be controlled, monitored and exchange information from remote locations over the internet while been connected to an Application Programme Interface (API) and sensors. It utilizes low-powered digital radios for communication enabling millions and billions of Low-power and Lossy Network (LLN) devices to communicate efficiently via a predetermined routing protocol. Several research gaps have identified the constraints of standardised versions of IPv6 Routing Protocol for Low Power and Lossy Networks evidently showing its lack of ability to handle the growing application needs and challenges. This research aims to handle routing from a different perspective extending from energy efficiency, to mobility aware and energy scavenging nodes thereby presenting numerous improvements that can suit various network topologies and application needs. Envisioning all the prospects and innovative services associated with the futuristic ubiquitous communication of IoT applications, we propose an adaptive Objective Function for RPL protocol known as Optimum Reliable Objective Function (OR-OF) having a fuzzy combination of five routing metrics which are chosen based on system and application requirements. It is an approach which combines the three proposed implemented Objective Functions within this thesis to enable the OR-OF adapt to different routing requirements for different IoT applications. The three proposed OFs are Energy saving Routing OF, Enhanced Mobility Support Routing OF and Optimized OF for Energy Scavenging nodes. All proposed OFs were designed, implemented, and simulated in COOJA simulator of ContikiOS, and mathematical models were developed to validate simulated results. Performance Evaluation indicated an overall improvement as compared with the standardised versions of RPL protocols and other related research works in terms of network lifetime with an average of 40%, packet delivery ratio of 21%, energy consumption of 82% and End-to-End Delay of 92%