Labeling Diversity for 2x2 WLAN Coded-Cooperative Networks

Labelling diversity is an efficient technique recently proposed in the literature and aims to improve the bit error rate(BER) performance of wireless local area network (WLAN) systems with two transmit and two receive antennas without increasing the transmit power and bandwidth requirements. In this paper, we employ labelling diversity with different space-time channel codes such as convolutional, turbo and low density parity check (LDPC) for both point-to-point and coded-cooperative communication scenarios. Joint iterative decoding schemes for distributed turbo and LDPC codes are also presented. BER performance bounds at an error floor (EF) region are derived and verified with the help of numerical simulations for both cooperative and non-cooperative schemes. Numerical simulations show that the coded-cooperative schemes with labelling diversity achieve better BER performances and use of labelling diversity at the source node significantly lowers relay outage probability and hence the overall BER performance of the coded-cooperative scheme is improved manifolds

Signal design for Multiple-Antenna Systems and Wireless Networks

This dissertation is concerned with the signal design problems for Multiple Input and Multiple Output (MIMO) antenna systems and wireless networks. Three related but distinct problems are considered.The first problem considered is the design of space time codes for MIMO systems in the case when neither the transmitter nor the receiver knows the channel. We present the theoretical concept of communicating over block fading channel using Layered Unitary Space Time Codes (LUSTC), where the input signal is formed as a product of a series of unitary matrices with corresponding dimensionality. We show the channel capacity using isotropically distributed (i.d.) input signaling and optimal decoding can be achieved by layered i.d. signaling scheme along with a low complexity successive decoding. The closed form layered channel capacity is obtained, which serves as a design guideline for practical LUSTC. In the design of LUSTC, a successive design method is applied to leverage the problem of optimizing over lots of parameters.The feedback of channel state information (CSI) to the transmitter in MIMO systems is known to increase the forward channel capacity. A suboptimal power allocation scheme for MIMO systems is then proposed for limited rate feedback of CSI. We find that the capacity loss of this simple scheme is rather small compared to the optimal water-filling solution. This knowledge is applied for the design of the feedback codebook. In the codebook design, a generalized Lloyd algorithm is employed, in which the computation of the centroid is formulated as an optimization problem and solved optimally. Numerical results show that the proposed codebook design outperforms the existing algorithms in the literature.While it is not feasible to deploy multiple antennas in a wireless node due to the space limitation, user cooperation is an alternative to increase performance of the wireless networks. To this end, a coded user cooperation scheme is considered in the dissertation, which is shown to be equivalent to a coding scheme with the encoding done in a distributive manner. Utilizing the coding theoretic bound and simulation results, we show that the coded user cooperation scheme has great advantage over the non-cooperative scheme

Principles of Physical Layer Security in Multiuser Wireless Networks: A Survey

This paper provides a comprehensive review of the domain of physical layer security in multiuser wireless networks. The essential premise of physical-layer security is to enable the exchange of confidential messages over a wireless medium in the presence of unauthorized eavesdroppers without relying on higher-layer encryption. This can be achieved primarily in two ways: without the need for a secret key by intelligently designing transmit coding strategies, or by exploiting the wireless communication medium to develop secret keys over public channels. The survey begins with an overview of the foundations dating back to the pioneering work of Shannon and Wyner on information-theoretic security. We then describe the evolution of secure transmission strategies from point-to-point channels to multiple-antenna systems, followed by generalizations to multiuser broadcast, multiple-access, interference, and relay networks. Secret-key generation and establishment protocols based on physical layer mechanisms are subsequently covered. Approaches for secrecy based on channel coding design are then examined, along with a description of inter-disciplinary approaches based on game theory and stochastic geometry. The associated problem of physical-layer message authentication is also introduced briefly. The survey concludes with observations on potential research directions in this area.Comment: 23 pages, 10 figures, 303 refs. arXiv admin note: text overlap with arXiv:1303.1609 by other authors. IEEE Communications Surveys and Tutorials, 201

A Critical Review of Physical Layer Security in Wireless Networking

Wireless networking has kept evolving with additional features and increasing capacity. Meanwhile, inherent characteristics of wireless networking make it more vulnerable than wired networks. In this thesis we present an extensive and comprehensive review of physical layer security in wireless networking. Different from cryptography, physical layer security, emerging from the information theoretic assessment of secrecy, could leverage the properties of wireless channel for security purpose, by either enabling secret communication without the need of keys, or facilitating the key agreement process. Hence we categorize existing literature into two main branches, namely keyless security and key-based security. We elaborate the evolution of this area from the early theoretic works on the wiretap channel, to its generalizations to more complicated scenarios including multiple-user, multiple-access and multiple-antenna systems, and introduce not only theoretical results but practical implementations. We critically and systematically examine the existing knowledge by analyzing the fundamental mechanics for each approach. Hence we are able to highlight advantages and limitations of proposed techniques, as well their interrelations, and bring insights into future developments of this area

Cross-Layer design and analysis of cooperative wireless networks relying on efficient coding techniques

2011/2012This thesis work aims at analysing the performance of efficient cooperative techniques and of smart antenna aided solutions in the context of wireless networks. Particularly, original contributions include a performance analysis of distributed coding techniques for the physical layer of communication systems, the design of practical efficient coding schemes that approach the analytic limiting bound, the cross-layer design of cooperative medium access control systems that incorporate and benefit from advanced physical layer techniques, the study of the performance of such solutions under realistic network assumptions, and, finally the design of access protocols where nodes are equipped with smart antenna systems.XXV Ciclo198

Asymmetric Turbo Code for Coded-Cooperative Wireless Communication Based on Matched Interleaver with Channel Estimation and Multi-Receive Antennas at the Destination

This paper investigates the multiple relay coded-cooperation scheme based on asymmetric turbo code (ATC) with multiple receive antennas over Rayleigh block fading channels. An encoding scheme based on ATC is proposed for coded-cooperation i.e. distributed asymmetric turbo code (DATC). The code matched interleaver (CMI) is selected by a rigorous comparison with a uniform-random interleaver (URI). This optimum choice of interleaver at the relay nodes provides maximum benefit from DATC coded-cooperation scheme. Practically in any wireless communication system, the channel side information (CSI) is usually unknown at the receiver. Therefore, spatial normalized least mean square (NLMS) adaptive transversal filters are employed to estimate the CSI at the destination node. Moreover, in coded-cooperation scheme, the effectiveness and validation of spatial NLMS adaptive transversal filters is also verified by simulation results. Quadrature phase shift keying (QPSK) is used in coded-cooperation scheme and corresponding soft-demodulators are employed along with joint iterative soft-input soft-output (SISO) decoder at the destination node. Monte Carlo simulations shows that the proposed scheme incorporates coding gain, diversity gain and cooperation gain successfully, which eventually results in net gain of 2.7 to 3.5 dBs over non-cooperation ATC counterpart

Turbo and Raptor Coded SIC Receiver Performance for the Coexistence of LTE and Wi-Fi

In this thesis, a coexistence of LTE and Wi-Fi is proposed. We assume that both LTE and Wi-Fi transmit in the same band simultaneously, the Wi-Fi signal, which is assumed to be the stronger signal, can be decoded first. We can achieve a good performance of LTE transmission by using a Successive Interference Cancellation (SIC) scheme. The LTE signal, which is the weaker signal, can be decoded successfully as though there is no Wi-Fi interference. We implement a Raptor code for Wi-Fi and a Turbo code for LTE. By adjusting the code rate, the Raptor codes are adaptive to diferent channel conditions especially with interference. Meanwhile, the Turbo codes are standardized in LTE transmission. We propose a new antenna integration design, in which only one antenna is used. As a result, the space of mobile devices can be saved and the interference caused by diferent transmissions can be avoided. Then, we study two scenarios based on diferent channels. Under the first scenario, a primary user and a secondary user transmit their own signals over the same AWGN channel. The simulation results indicate that by using a SIC scheme, an increasing system capacity can be obtained by the secondary transmission, with no sacrifce of the primary user's performance. In the second scenario, the LTE and Wi-Fi transmit over a Rayleigh fading channel simultaneously. A straightforward estimation scheme is adopted to estimate the Channel State Information (CSI) at the receiver. We discuss two cases according to the CSI. The first case is that the CSI is available at the receiver. A novel scheme is proposed to overcome the disadvantages of a slow block fading channel. In this scheme, we implement an interlever at both the transmitter and receiver, and therefore utilize the CSI efficiently at the receiver to improve the system performance. In the second case the CSI is available at both the transmitter and receiver. An adaptive power control scheme is proposed to adjust the transmitted power to a desired level, and therefore improve the system

Power allocation and linear precoding for wireless communications with finite-alphabet inputs

This dissertation proposes a new approach to maximizing data rate/throughput of practical communication system/networks through linear precoding and power allocation. First, the mutual information or capacity region is derived for finite-alphabet inputs such as phase-shift keying (PSK), pulse-amplitude modulation (PAM), and quadrature amplitude modulation (QAM) signals. This approach, without the commonly used Gaussian input assumptions, complicates the mutual information analysis and precoder design but improves performance when the designed precoders are applied to practical systems and networks. Second, several numerical optimization methods are developed for multiple-input multiple-output (MIMO) multiple access channels, dual-hop relay networks, and point-to-point MIMO systems. In MIMO multiple access channels, an iterative weighted sum rate maximization algorithm is proposed which utilizes an alternating optimization strategy and gradient descent update. In dual-hop relay networks, the structure of the optimal precoder is exploited to develop a two-step iterative algorithm based on convex optimization and optimization on the Stiefel manifold. The proposed algorithm is insensitive to initial point selection and able to achieve a near global optimal precoder solution. The gradient descent method is also used to obtain the optimal power allocation scheme which maximizes the mutual information between the source node and destination node in dual-hop relay networks. For point-to-point MIMO systems, a low complexity precoding design method is proposed, which maximizes the lower bound of the mutual information with discretized power allocation vector in a non-iterative fashion, thus reducing complexity. Finally, performances of the proposed power allocation and linear precoding schemes are evaluated in terms of both mutual information and bit error rate (BER). Numerical results show that at the same target mutual information or sum rate, the proposed approaches achieve 3-10dB gains compared to the existing methods in the medium signal-to-noise ratio region. Such significant gains are also indicated in the coded BER systems --Abstract, page iv-v