TTCM-aided rate-adaptive distributed source coding for Rayleigh fading channels

Adaptive turbo-trellis-coded modulation (TTCM)-aided asymmetric distributed source coding (DSC) is proposed, where two correlated sources are transmitted to a destination node. The first source sequence is TTCM encoded and is further compressed before it is transmitted through a Rayleigh fading channel, whereas the second source signal is assumed to be perfectly decoded and, hence, to be flawlessly shown at the destination for exploitation as side information for improving the decoding performance of the first source. The proposed scheme is capable of reliable communications within 0.80 dB of the Slepian-Wolf/Shannon (SW/S) theoretical limit at a bit error rate (BER) of 10-5. Furthermore, its encoder is capable of accommodating time-variant short-term correlation between the two sources

Multi-Way Relay Networks: Orthogonal Uplink, Source-Channel Separation and Code Design

We consider a multi-way relay network with an orthogonal uplink and correlated sources, and we characterise reliable communication (in the usual Shannon sense) with a single-letter expression. The characterisation is obtained using a joint source-channel random-coding argument, which is based on a combination of Wyner et al.'s "Cascaded Slepian-Wolf Source Coding" and Tuncel's "Slepian-Wolf Coding over Broadcast Channels". We prove a separation theorem for the special case of two nodes; that is, we show that a modular code architecture with separate source and channel coding functions is (asymptotically) optimal. Finally, we propose a practical coding scheme based on low-density parity-check codes, and we analyse its performance using multi-edge density evolution.Comment: Authors' final version (accepted and to appear in IEEE Transactions on Communications

Distributed coding using punctured quasi-arithmetic codes for memory and memoryless sources

This correspondence considers the use of punctured quasi-arithmetic (QA) codes for the Slepian–Wolf problem. These entropy codes are defined by finite state machines for memoryless and first-order memory sources. Puncturing an entropy coded bit-stream leads to an ambiguity at the decoder side. The decoder makes use of a correlated version of the original message in order to remove this ambiguity. A complete distributed source coding (DSC) scheme based on QA encoding with side information at the decoder is presented, together with iterative structures based on QA codes. The proposed schemes are adapted to memoryless and first-order memory sources. Simulation results reveal that the proposed schemes are efficient in terms of decoding performance for short sequences compared to well-known DSC solutions using channel codes.Peer ReviewedPostprint (published version

Low-density parity-check codes for asymmetric distributed source coding

The research work is partially funded by the Strategic Educational Pathways Scholarship Scheme (STEPS-Malta). This scholarship is partly financed by the European Union - European Social Fund (ESF 1.25).Low-Density Parity-Check (LDPC) codes achieve good performance, tending towards the Slepian-Wolf bound, when used as channel codes in Distributed Source Coding (DSC). Most LDPC codes found in literature are designed assuming random distribution of transmission errors. However, certain DSC applications can predict the error location within a certain level of accuracy. This feature can be exploited in order to design application specific LDPC codes to enhance the performance of traditional LDPC codes. This paper proposes a novel architecture for asymmetric DSC where the encoder is able to estimate the location of the errors within the side information. It then interleaves the bits having a high probability of error to the beginning of the codeword. The LDPC codes are designed to provide a higher level of protection to the front bits. Simulation results show that correct localization of errors pushes the performance of the system on average 13.3% closer to the Slepian-Wolf bound, compared to the randomly constructed LDPC codes. If the error localization prediction fails, such that the errors are randomly distributed, the performance is still in line with that of the traditional DSC architecture.peer-reviewe

Distributed Joint Source-Channel Coding in Wireless Sensor Networks

Considering the fact that sensors are energy-limited and the wireless channel conditions in wireless sensor networks, there is an urgent need for a low-complexity coding method with high compression ratio and noise-resisted features. This paper reviews the progress made in distributed joint source-channel coding which can address this issue. The main existing deployments, from the theory to practice, of distributed joint source-channel coding over the independent channels, the multiple access channels and the broadcast channels are introduced, respectively. To this end, we also present a practical scheme for compressing multiple correlated sources over the independent channels. The simulation results demonstrate the desired efficiency

Design techniques for graph-based error-correcting codes and their applications

In ShannonÂs seminal paper, ÂA Mathematical Theory of CommunicationÂ, he defined ÂChannel Capacity which predicted the ultimate performance that transmission systems can achieve and suggested that capacity is achievable by error-correcting (channel) coding. The main idea of error-correcting codes is to add redundancy to the information to be transmitted so that the receiver can explore the correlation between transmitted information and redundancy and correct or detect errors caused by channels afterward. The discovery of turbo codes and rediscovery of Low Density Parity Check codes (LDPC) have revived the research in channel coding with novel ideas and techniques on code concatenation, iterative decoding, graph-based construction and design based on density evolution. This dissertation focuses on the design aspect of graph-based channel codes such as LDPC and Irregular Repeat Accumulate (IRA) codes via density evolution, and use the technique (density evolution) to design IRA codes for scalable image/video communication and LDPC codes for distributed source coding, which can be considered as a channel coding problem. The first part of the dissertation includes design and analysis of rate-compatible IRA codes for scalable image transmission systems. This part presents the analysis with density evolution the effect of puncturing applied to IRA codes and the asymptotic analysis of the performance of the systems. In the second part of the dissertation, we consider designing source-optimized IRA codes. The idea is to take advantage of the capability of Unequal Error Protection (UEP) of IRA codes against errors because of their irregularities. In video and image transmission systems, the performance is measured by Peak Signal to Noise Ratio (PSNR). We propose an approach to design IRA codes optimized for such a criterion. In the third part of the dissertation, we investigate Slepian-Wolf coding problem using LDPC codes. The problems to be addressed include coding problem involving multiple sources and non-binary sources, and coding using multi-level codes and nonbinary codes