1,742 research outputs found
Inverse Control and Stabilization of Free-flying Flexible Robots
The question of control and stabilization of flexible space robots is considered. Although, this approach is applicable to space robots of other configurations, for simplicity, a flexible planar two-link robot, mounted on a rigid floating platform, is considered. The robotic arm has two revolute joints and its links undergo elastic deformation in the plane of rotation. Based on nonlinear inversion technique, a control law is derived for controlling output variables describing the position and orientation of the platform and the joint angles of the robot. Although, the inverse controller accomplishes reference trajectory tracking, it excites the elastic modes of the arm. For the vibration suppression, three different stabilizer are designed. Using linear quadratic optimal control theory, a composite stabilizer for stabilization of the rigid and flexible modes and a decoupled flexible mode stabilizer are designed for regulating the end point of the robot to the target point and vibration suppression. Stabilization using only elastic mode velocity feedback is also considered. For large maneuvers, first the inverse controller is active, and the stabilizer is switched for regulation when the motion of the robot lies in the neighborhood of the terminal equilibrium state. Simulation results are presented to show that in the closed-loop system including the inverse controller and each of the stabilizers, trajectory tracking and stabilization of elastic modes are accomplished
Motion Planning for the On-orbit Grasping of a Non-cooperative Target Satellite with Collision Avoidance
A method for grasping a tumbling noncooperative
target is presented, which is based on
nonlinear optimization and collision avoidance. Motion
constraints on the robot joints as well as on the
end-effector forces are considered. Cost functions of
interest address the robustness of the planned solutions
during the tracking phase as well as actuation
energy. The method is applied in simulation to different
operational scenarios
A review of aerial manipulation of small-scale rotorcraft unmanned robotic systems
Small-scale rotorcraft unmanned robotic systems (SRURSs) are a kind of unmanned rotorcraft with manipulating devices. This review aims to provide an overview on aerial manipulation of SRURSs nowadays and promote relative research in the future. In the past decade, aerial manipulation of SRURSs has attracted the interest of researchers globally. This paper provides a literature review of the last 10 years (2008–2017) on SRURSs, and details achievements and challenges. Firstly, the definition, current state, development, classification, and challenges of SRURSs are introduced. Then, related papers are organized into two topical categories: mechanical structure design, and modeling and control. Following this, research groups involved in SRURS research and their major achievements are summarized and classified in the form of tables. The research groups are introduced in detail from seven parts. Finally, trends and challenges are compiled and presented to serve as a resource for researchers interested in aerial manipulation of SRURSs. The problem, trends, and challenges are described from three aspects. Conclusions of the paper are presented, and the future of SRURSs is discussed to enable further research interests
Air vehicle simulator: an application for a cable array robot
The development of autonomous air vehicles can be an expensive research pursuit. To alleviate some of the financial burden of this process, we have constructed a system consisting of four winches each attached to a central pod (the simulated air vehicle) via cables - a cable-array robot. The system is capable of precisely controlling the three dimensional position of the pod allowing effective testing of sensing and control strategies before experimentation on a free-flying vehicle. In this paper, we present a brief overview of the system and provide a practical control strategy for such a system. ©2005 IEEE
Pose consensus based on dual quaternion algebra with application to decentralized formation control of mobile manipulators
This paper presents a solution based on dual quaternion algebra to the
general problem of pose (i.e., position and orientation) consensus for systems
composed of multiple rigid-bodies. The dual quaternion algebra is used to model
the agents' poses and also in the distributed control laws, making the proposed
technique easily applicable to time-varying formation control of general
robotic systems. The proposed pose consensus protocol has guaranteed
convergence when the interaction among the agents is represented by directed
graphs with directed spanning trees, which is a more general result when
compared to the literature on formation control. In order to illustrate the
proposed pose consensus protocol and its extension to the problem of formation
control, we present a numerical simulation with a large number of free-flying
agents and also an application of cooperative manipulation by using real mobile
manipulators
Space robotics: Recent accomplishments and opportunities for future research
The Langley Guidance, Navigation, and Control Technical Committee (GNCTC) was one of six technical committees created in 1991 by the Chief Scientist, Dr. Michael F. Card. During the kickoff meeting Dr. Card charged the chairmen to: (1) establish a cross-Center committee; (2) support at least one workshop in a selected discipline; and (3) prepare a technical paper on recent accomplishments in the discipline and on opportunities for future research. The Guidance, Navigation, and Control Committee was formed and selected for focus on the discipline of Space robotics. This report is a summary of the committee's assessment of recent accomplishments and opportunities for future research. The report is organized as follows. First is an overview of the data sources used by the committee. Next is a description of technical needs identified by the committee followed by recent accomplishments. Opportunities for future research ends the main body of the report. It includes the primary recommendation of the committee that NASA establish a national space facility for the development of space automation and robotics, one element of which is a telerobotic research platform in space. References 1 and 2 are the proceedings of two workshops sponsored by the committee during its June 1991, through May 1992 term. The focus of the committee for the June 1992 - May 1993 term will be to further define to the recommended platform in space and to add an additional discipline which includes aircraft related GN&C issues. To the latter end members performing aircraft related research will be added to the committee. (A preliminary assessment of future opportunities in aircraft-related GN&C research has been included as appendix A.
CSI related dynamics and control issues in space robotics
The research addressed includes: (1) CSI issues in space robotics; (2) control of elastic payloads, which includes 1-DOF example, and 3-DOF harmonic drive arm with elastic beam; and (3) control of large space arms with elastic links, which includes testbed description, modeling, and experimental implementation of colocated PD and end-point tip position controllers
- …