Redesigning the human-robot interface : intuitive teleoperation of anthropomorphic robots

textA novel interface for robotic teleoperation was developed to enable accurate and highly efficient teleoperation of the Industrial Reconfigurable Anthropomorphic Dual-arm (IRAD) system and other robotic systems. In order to achieve a revolutionary increase in operator productivity, the bilateral/master-slave approach must give way to shared autonomy and unilateral control; autonomy must be employed where possible, and appropriate sensory feedback only where autonomy is impossible; and today’s low-information/high feedback model must be replaced by one that emphasizes feedforward precision and minimal corrective feedback. This is emphasized for task spaces outside of the traditional anthropomorphic scale such as mobile manipulation (i.e. large task spaces) and high precision tasks (i.e. very small task spaces). The system is demonstrated using an anthropomorphically dimensioned industrial manipulator working in task spaces from one meter to less than one millimeter, in both simulation and hardware. This thesis discusses the design requirements and philosophy of this interface, provides a summary of prototype teleoperation hardware, simulation environment, test-bed hardware, and experimental results.Mechanical Engineerin

End-to-end congestion control protocols for remote programming of robots, using heterogeneous networks: A comparative analysis

There are many interesting aspects of Internet Telerobotics within the network robotics context, such as variable bandwidth and time-delays. Some of these aspects have been treated in the literature from the control point of view. Moreover, only a little work is related to the way Internet protocols can help to minimize the effect of delay and bandwidth fluctuation on network robotics. In this paper, we present the capabilities of TCP, UDP, TCP Las Vegas, TEAR, and Trinomial protocols, when performing a remote experiment within a network robotics application, the UJI Industrial Telelaboratory. Comparative analysis is presented through simulations within the NS2 platform. Results show how these protocols perform in two significant situations within the network robotics context, using heterogeneous wired networks: (1) an asymmetric network when controlling the system through a ADSL connection, and (2) a symmetric network using the system on Campus. Conclusions show a set of characteristics the authors of this paper consider very important when designing an End-to-End Congestion Control transport protocol for Internet Telerobotics

Control of Cooperative Haptics-Enabled Teleoperation Systems with Application to Minimally Invasive Surgery

Robot-Assisted Minimally Invasive Surgical (RAMIS) systems frequently have a structure of cooperative teleoperator systems where multiple master-slave pairs are used to collaboratively execute a task. Although multiple studies indicate that haptic feedback improves the realism of tool-tissue interaction to the surgeon and leads to better performance for surgical procedures, current telesurgical systems typically do not provide force feedback, mainly because of the inherent stability issues. The research presented in this thesis is directed towards the development of control algorithms for force reflecting cooperative surgical teleoperator systems with improved stability and transparency characteristics. In the case of cooperative force reflecting teleoperation over networks, conventional passivity based approaches may have limited applicability due to potentially non-passive slave-slave interactions and irregular communication delays imposed by the network. In this thesis, an alternative small gain framework for the design of cooperative network-based force reflecting teleoperator systems is developed. Using the small gain framework, control algorithms for cooperative force-reflecting teleoperator systems are designed that guarantee stability in the presence of multiple network-induced communication constraints. Furthermore, the design conservatism typically associated with the small-gain approach is eliminated by using the Projection-Based Force Reflection (PBFR) algorithms. Stability results are established for networked cooperative teleoperator systems under different types of force reflection algorithms in the presence of irregular communication delays. The proposed control approach is consequently implemented on a dual-arm (two masters/two slaves) robotic MIS testbed. The testbed consists of two Haptic Wand devices as masters and two PA10-7C robots as the slave manipulators equipped with da Vinci laparoscopic surgical instruments. The performance of the proposed control approach is evaluated in three different cooperative surgical tasks, which are knot tightening, pegboard transfer, and object manipulation. The experimental results obtained indicate that the PBFR algorithms demonstrate statistically significant performance improvement in comparison with the conventional direct force reflection algorithms. One possible shortcoming of using PBFR algorithms is that implementation of these algorithms may lead to attenuation of the high-frequency component of the contact force which is important, in particular, for haptic perception of stiff surfaces. In this thesis, a solution to this problem is proposed which is based on the idea of separating the different frequency bands in the force reflection signal and consequently applying the projection-based principle to the low-frequency component, while reflecting the high-frequency component directly. The experimental results demonstrate that substantial improvement in transient fidelity of the force feedback is achieved using the proposed method without negative effects on the stability of the system

Haptic guidance with force feedback to assist teleoperation systems via high speed networks

The employment of haptic devices in teleoperation systems and the use of motion restrictions during robot teleoperation provide the operator with increased awareness and can considerably improve the feeling of immersion and moreover his ability to perform complex tasks. In the last decade Internet has become one of the major sources of information. It already connects millions of computers and more than a billion people. Its spectacular growth have lead to the creation of new high speed networks with new capabilities. In the work described in this paper those networks that use recent-creation packet switched protocols like Internet Protocol version 6 (IPv6) with high Quality of Service (QoS) will serve as the communication channel for the teleoperation system.Peer Reviewe

Expert-in-the-Loop Multilateral Telerobotics for Haptics-Enabled Motor Function and Skills Development

Among medical robotics applications are Robotics-Assisted Mirror Rehabilitation Therapy (RAMRT) and Minimally-Invasive Surgical Training (RAMIST) that extensively rely on motor function development. Haptics-enabled expert-in-the-loop motor function development for such applications is made possible through multilateral telerobotic frameworks. While several studies have validated the benefits of haptic interaction with an expert in motor learning, contradictory results have also been reported. This emphasizes the need for further in-depth studies on the nature of human motor learning through haptic guidance and interaction. The objective of this study was to design and evaluate expert-in-the-loop multilateral telerobotic frameworks with stable and human-safe control loops that enable adaptive “hand-over-hand” haptic guidance for RAMRT and RAMIST. The first prerequisite for such frameworks is active involvement of the patient or trainee, which requires the closed-loop system to remain stable in the presence of an adaptable time-varying dominance factor. To this end, a wave-variable controller is proposed in this study for conventional trilateral teleoperation systems such that system stability is guaranteed in the presence of a time-varying dominance factor and communication delay. Similar to other wave-variable approaches, the controller is initially developed for the Velocity-force Domain (VD) based on the well-known passivity assumption on the human arm in VD. The controller can be applied straightforwardly to the Position-force Domain (PD), eliminating position-error accumulation and position drift, provided that passivity of the human arm in PD is addressed. However, the latter has been ignored in the literature. Therefore, in this study, passivity of the human arm in PD is investigated using mathematical analysis, experimentation as well as user studies involving 12 participants and 48 trials. The results, in conjunction with the proposed wave-variables, can be used to guarantee closed-loop PD stability of the supervised trilateral teleoperation system in its classical format. The classic dual-user teleoperation architecture does not, however, fully satisfy the requirements for properly imparting motor function (skills) in RAMRT (RAMIST). Consequently, the next part of this study focuses on designing novel supervised trilateral frameworks for providing motor learning in RAMRT and RAMIST, each customized according to the requirements of the application. The framework proposed for RAMRT includes the following features: a) therapist-in-the-loop mirror therapy; b) haptic feedback to the therapist from the patient side; c) assist-as-needed therapy realized through an adaptive Guidance Virtual Fixture (GVF); and d) real-time task-independent and patient-specific motor-function assessment. Closed-loop stability of the proposed framework is investigated using a combination of the Circle Criterion and the Small-Gain Theorem. The stability analysis addresses the instabilities caused by: a) communication delays between the therapist and the patient, facilitating haptics-enabled tele- or in-home rehabilitation; and b) the integration of the time-varying nonlinear GVF element into the delayed system. The platform is experimentally evaluated on a trilateral rehabilitation setup consisting of two Quanser rehabilitation robots and one Quanser HD2 robot. The framework proposed for RAMIST includes the following features: a) haptics-enabled expert-in-the-loop surgical training; b) adaptive expertise-oriented training, realized through a Fuzzy Interface System, which actively engages the trainees while providing them with appropriate skills-oriented levels of training; and c) task-independent skills assessment. Closed-loop stability of the architecture is analyzed using the Circle Criterion in the presence and absence of haptic feedback of tool-tissue interactions. In addition to the time-varying elements of the system, the stability analysis approach also addresses communication delays, facilitating tele-surgical training. The platform is implemented on a dual-console surgical setup consisting of the classic da Vinci surgical system (Intuitive Surgical, Inc., Sunnyvale, CA), integrated with the da Vinci Research Kit (dVRK) motor controllers, and the dV-Trainer master console (Mimic Technology Inc., Seattle, WA). In order to save on the expert\u27s (therapist\u27s) time, dual-console architectures can also be expanded to accommodate simultaneous training (rehabilitation) for multiple trainees (patients). As the first step in doing this, the last part of this thesis focuses on the development of a multi-master/single-slave telerobotic framework, along with controller design and closed-loop stability analysis in the presence of communication delays. Various parts of this study are supported with a number of experimental implementations and evaluations. The outcomes of this research include multilateral telerobotic testbeds for further studies on the nature of human motor learning and retention through haptic guidance and interaction. They also enable investigation of the impact of communication time delays on supervised haptics-enabled motor function improvement through tele-rehabilitation and mentoring

Remote Control of Mobile Robot using the Virtual Reality

In this paper we present the simulation and manipulation of  teleoperation system for remote control of mobile robot using the Virtual Reality (VR). The objective of this work is to allow the operator to control and supervise a unicycle type mobile robot. In this research we followed three ways: The use of articulated robotic mobile on the Web, the design of remote environment for the experimentation using the network for the mobile robot and the  architecture of control is proposed to facilitate the piloting of the robot. This work proposes a hardware and software architecture based on communication and information technologies to control the virtual robot to improve the control towards the remote robot. A path planning method is integrated to the remote control system. Results show the real possibilities offered by this manipulation, in order to follow a trajectory of the robot and to create applications with a distance access to facilities through networks like the Internet and wireless

Bilateral haptic guided Robot teleoperation via packet switched networks using wave variables with impedance adaptation

This paper presents the use of haptic devices in teleoperation systems with motion restrictions during robot teleoperation in order to provide the operator with increased awareness and better feeling of immersion, hence, improving his ability to perform complex tasks. The use of wave variables in the proposed system renders passive the communication channel, and moreover the new packet switched protocols like Internet Protocol version 6 (IPv6) with high Quality of Service (QoS), provides differentiated services for control signals.Peer Reviewe

Haptic control of multi-axis robotic systems

Control of tele-operated remote robot&rsquo;s is nothing new; the public was introduced to this \u27new\u27 field in 1986 when the Chernobyl cleanup began. Pictures of weird and wonderful robotic workers pouring concrete or moving rubble flooded the world. Integration of force feedback or \u27haptics\u27 to remote robot\u27s is a new development and one that is likely to make a big difference in man-machine interaction. Development of haptic capable tele-operation schema is a challenge. Often platform specific software is developed for one off tasks. This research focussed on the development of an open software platform for haptic control of multiple remote robotic platforms. The software utilises efficient server/client architecture for low data latency, while efficiently performing required kinematic transforms and data manipulation in real time. A description of the algorithm, software interface and hardware is presented in this paper. Preliminary results are encouraging as haptic control has been shown to greatly enhances remote positioning tasks.<br /