1,716 research outputs found
Simultaneous Transmission and Reception: Algorithm, Design and System Level Performance
Full Duplex or Simultaneous transmission and reception (STR) in the same
frequency at the same time can potentially double the physical layer capacity.
However, high power transmit signal will appear at receive chain as echoes with
powers much higher than the desired received signal. Therefore, in order to
achieve the potential gain, it is imperative to cancel these echoes. As these
high power echoes can saturate low noise amplifier (LNA) and also digital
domain echo cancellation requires unrealistically high resolution
analog-to-digital converter (ADC), the echoes should be cancelled or suppressed
sufficiently before LNA. In this paper we present a closed-loop echo
cancellation technique which can be implemented purely in analogue domain. The
advantages of our method are multiple-fold: it is robust to phase noise, does
not require additional set of antennas, can be applied to wideband signals and
the performance is irrelevant to radio frequency (RF) impairments in transmit
chain. Next, we study a few protocols for STR systems in carrier sense multiple
access (CSMA) network and investigate MAC level throughput with realistic
assumptions in both single cell and multiple cells. We show that STR can reduce
hidden node problem in CSMA network and produce gains of up to 279% in maximum
throughput in such networks. Finally, we investigate the application of STR in
cellular systems and study two new unique interferences introduced to the
system due to STR, namely BS-BS interference and UE-UE interference. We show
that these two new interferences will hugely degrade system performance if not
treated appropriately. We propose novel methods to reduce both interferences
and investigate the performances in system level.Comment: 20 pages. This manuscript will appear in the IEEE Transactions on
Wireless Communication
Massive MIMO for Internet of Things (IoT) Connectivity
Massive MIMO is considered to be one of the key technologies in the emerging
5G systems, but also a concept applicable to other wireless systems. Exploiting
the large number of degrees of freedom (DoFs) of massive MIMO essential for
achieving high spectral efficiency, high data rates and extreme spatial
multiplexing of densely distributed users. On the one hand, the benefits of
applying massive MIMO for broadband communication are well known and there has
been a large body of research on designing communication schemes to support
high rates. On the other hand, using massive MIMO for Internet-of-Things (IoT)
is still a developing topic, as IoT connectivity has requirements and
constraints that are significantly different from the broadband connections. In
this paper we investigate the applicability of massive MIMO to IoT
connectivity. Specifically, we treat the two generic types of IoT connections
envisioned in 5G: massive machine-type communication (mMTC) and ultra-reliable
low-latency communication (URLLC). This paper fills this important gap by
identifying the opportunities and challenges in exploiting massive MIMO for IoT
connectivity. We provide insights into the trade-offs that emerge when massive
MIMO is applied to mMTC or URLLC and present a number of suitable communication
schemes. The discussion continues to the questions of network slicing of the
wireless resources and the use of massive MIMO to simultaneously support IoT
connections with very heterogeneous requirements. The main conclusion is that
massive MIMO can bring benefits to the scenarios with IoT connectivity, but it
requires tight integration of the physical-layer techniques with the protocol
design.Comment: Submitted for publicatio
Acoustical Ranging Techniques in Embedded Wireless Sensor Networked Devices
Location sensing provides endless opportunities for a wide range of applications in GPS-obstructed environments;
where, typically, there is a need for higher degree of accuracy. In this article, we focus on robust range
estimation, an important prerequisite for fine-grained localization. Motivated by the promise of acoustic in
delivering high ranging accuracy, we present the design, implementation and evaluation of acoustic (both
ultrasound and audible) ranging systems.We distill the limitations of acoustic ranging; and present efficient
signal designs and detection algorithms to overcome the challenges of coverage, range, accuracy/resolution,
tolerance to Doppler’s effect, and audible intensity. We evaluate our proposed techniques experimentally on
TWEET, a low-power platform purpose-built for acoustic ranging applications. Our experiments demonstrate
an operational range of 20 m (outdoor) and an average accuracy 2 cm in the ultrasound domain. Finally,
we present the design of an audible-range acoustic tracking service that encompasses the benefits of a near-inaudible
acoustic broadband chirp and approximately two times increase in Doppler tolerance to achieve better performance
Techniques for Communication and Geolocation using Wireless Ad hoc Networks
Networks with hundreds of ad hoc nodes equipped with communication and position finding abilities are conceivable with recent advancements in technology. Methods are presented in this thesis to assess the communicative capabilities and node position estimation of mobile ad hoc networks. Specifically, we investigate techniques for providing communication and geolocation with specific characteristics in wireless ad hoc networks. The material presented in this thesis, communication and geolocation, may initially seem a collection of disconnected topics related only distantly under the banner of ad hoc networks. However, systems currently in development combining these techniques into single integrated systems. In this thesis first, we investigate the effect of multilayer interaction, including fading and path loss, on ad hoc routing protocol performance, and present a procedure for deploying an ad hoc network based on extensive simulations. Our first goal is to test the routing protocols with parameters that can be used to characterize the environment in which they might be deployed. Second, we analyze the location discovery problem in ad hoc networks and propose a fully distributed, infrastructure-free positioning algorithm that does not rely on the Global Positioning System (GPS). The algorithm uses the approximate distances between the nodes to build a relative coordinate system in which the node positions are computed in three-dimensions. However, in reconstructing three-dimensional positions from approximate distances, we need to consider error threshold, graph connectivity, and graph rigidity. We also statistically evaluate the location discovery procedure with respect to a number of parameters, such as error propagation and the relative positions of the nodes
Improving Reliability of Synchrophasor Data Gathering Method Using Network Coding Technique
We consider synchrophasor data gathering method over the network of Phasor Measurement Units (PMUs) for Wide Area Measurement System (WAMS) applications. Although this network plays an important role to monitor, protect and control distribution electric grid, the research efforts in efficient data collection method are lacking in the literature. In this paper, we represent a novel data gathering approach using Network Coding technique and develop a mathematic model to predict the PMUs network reliability using our proposed model. It allows the PMU nodes in network to perform linear combination of many packets in order to improve the packet delivering ratio at the collector. We demonstrate our proposed method using a distribution grid test case and evaluate the performance by using Monter Carlo simulation. The numerical results have verified the effectiveness of our proposed method.We consider synchrophasor data gathering method over the network of Phasor Measurement Units (PMUs) for Wide Area Measurement System (WAMS) applications. Although this network plays an important role to monitor, protect and control distribution electric grid, the research efforts in efficient data collection method are lacking in the literature. In this paper, we represent a novel data gathering approach using Network Coding technique and develop a mathematic model to predict the PMUs network reliability using our proposed model. It allows the PMU nodes in network to perform linear combination of many packets in order to improve the packet delivering ratio at the collector. We demonstrate our proposed method using a distribution grid test case and evaluate the performance by using Monter Carlo simulation. The numerical results have verified the effectiveness of our proposed method
- …