Naming and discovery in networks : architecture and economics

In less than three decades, the Internet was transformed from a research network available to the academic community into an international communication infrastructure. Despite its tremendous success, there is a growing consensus in the research community that the Internet has architectural limitations that need to be addressed in a effort to design a future Internet. Among the main technical limitations are the lack of mobility support, and the lack of security and trust. The Internet, and particularly TCP/IP, identifies endpoints using a location/routing identifier, the IP address. Coupling the endpoint identifier to the location identifier hinders mobility and poorly identifies the actual endpoint. On the other hand, the lack of security has been attributed to limitations in both the network and the endpoint. Authentication for example is one of the main concerns in the architecture and is hard to implement partly due to lack of identity support. The general problem that this dissertation is concerned with is that of designing a future Internet. Towards this end, we focus on two specific sub-problems. The first problem is the lack of a framework for thinking about architectures and their design implications. It was obvious after surveying the literature that the majority of the architectural work remains idiosyncratic and descriptions of network architectures are mostly idiomatic. This has led to the overloading of architectural terms, and to the emergence of a large body of network architecture proposals with no clear understanding of their cross similarities, compatibility points, their unique properties, and architectural performance and soundness. On the other hand, the second problem concerns the limitations of traditional naming and discovery schemes in terms of service differentiation and economic incentives. One of the recurring themes in the community is the need to separate an entity\u27s identifier from its locator to enhance mobility and security. Separation of identifier and locator is a widely accepted design principle for a future Internet. Separation however requires a process to translate from the identifier to the locator when discovering a network path to some identified entity. We refer to this process as identifier-based discovery, or simply discovery, and we recognize two limitations that are inherent in the design of traditional discovery schemes. The first limitation is the homogeneity of the service where all entities are assumed to have the same discovery performance requirements. The second limitation is the inherent incentive mismatch as it relates to sharing the cost of discovery. This dissertation addresses both subproblems, the architectural framework as well as the naming and discovery limitations

The Design and Implementation of a Prototype Geographic Information System Using a Novel Architecture Based on PS-Algol

This thesis is concerned with the design and implementation of a novel architecture for a geographic information system based on the use of a new database language called PS-algol, in conjunction with a hybrid database structure. The main aspects discussed within the context of this thesis are:- i) the definition of a database; ii) the components and functions of a database management system; iii) the features of PS-algol; iv) the new system architecture; v) the use of operational management system; vi) data entry as carried out by the system; vii) the facility for the cartographic representation of features; viii) data retrieval and its potential use; and ix) the generation of hard-copy output The thesis also includes a review of existing geographical information systems against which the novelty of the new approach can be judged

Adaptive object management for distributed systems

This thesis describes an architecture supporting the management of pluggable software components and evaluates it against the requirement for an enterprise integration platform for the manufacturing and petrochemical industries. In a distributed environment, we need mechanisms to manage objects and their interactions. At the least, we must be able to create objects in different processes on different nodes; we must be able to link them together so that they can pass messages to each other across the network; and we must deliver their messages in a timely and reliable manner. Object based environments which support these services already exist, for example ANSAware(ANSA, 1989), DEC's Objectbroker(ACA,1992), Iona's Orbix(Orbix,1994)Yet such environments provide limited support for composing applications from pluggable components. Pluggability is the ability to install and configure a component into an environment dynamically when the component is used, without specifying static dependencies between components when they are produced. Pluggability is supported to a degree by dynamic binding. Components may be programmed to import references to other components and to explore their interfaces at runtime, without using static type dependencies. Yet thus overloads the component with the responsibility to explore bindings. What is still generally missing is an efficient general-purpose binding model for managing bindings between independently produced components. In addition, existing environments provide no clear strategy for dealing with fine grained objects. The overhead of runtime binding and remote messaging will severely reduce performance where there are a lot of objects with complex patterns of interaction. We need an adaptive approach to managing configurations of pluggable components according to the needs and constraints of the environment. Management is made difficult by embedding bindings in component implementations and by relying on strong typing as the only means of verifying and validating bindings. To solve these problems we have built a set of configuration tools on top of an existing distributed support environment. Specification tools facilitate the construction of independent pluggable components. Visual composition tools facilitate the configuration of components into applications and the verification of composite behaviours. A configuration model is constructed which maintains the environmental state. Adaptive management is made possible by changing the management policy according to this state. Such policy changes affect the location of objects, their bindings, and the choice of messaging system

The Beginnings and Prospective Ending of “End-to-End”: An Evolutionary Perspective On the Internet’s Architecture

The technology of “the Internet” is not static. Although its “end-to- end” architecture has made this “connection-less” communications system readily “extensible,” and highly encouraging to innovation both in hardware and software applications, there are strong pressures for engineering changes. Some of these are wanted to support novel transport services (e.g. voice telephony, real-time video); others would address drawbacks that appeared with opening of the Internet to public and commercial traffic - e.g., the difficulties of blocking delivery of offensive content, suppressing malicious actions (e.g. “denial of service” attacks), pricing bandwidth usage to reduce congestion. The expected gains from making “improvements” in the core of the network should be weighed against the loss of the social and economic benefits that derive from the “end-to-end” architectural design. Even where technological “fixes” can be placed at the networks’ edges, the option remains to search for alternative, institutional mechanisms of governing conduct in cyberspace.

Hierarchical network topographical routing

Within the last 10 years the content consumption model that underlies many of the assumptions about traffic aggregation within the Internet has changed; the previous short burst transfer followed by longer periods of inactivity that allowed for statistical aggregation of traffic has been increasingly replaced by continuous data transfer models. Approaching this issue from a clean slate perspective; this work looks at the design of a network routing structure and supporting protocols for assisting in the delivery of large scale content services. Rather than approaching a content support model through existing IP models the work takes a fresh look at Internet routing through a hierarchical model in order to highlight the benefits that can be gained with a new structural Internet or through similar modifications to the existing IP model. The work is divided into three major sections: investigating the existing UK based Internet structure as compared to the traditional Autonomous System (AS) Internet structural model; a localised hierarchical network topographical routing model; and intelligent distributed localised service models. The work begins by looking at the United Kingdom (UK) Internet structure as an example of a current generation technical and economic model with shared access to the last mile connectivity and a large scale wholesale network between Internet Service Providers (ISPs) and the end user. This model combined with the Internet Protocol (IP) address allocation and transparency of the wholesale network results in an enforced inefficiency within the overall network restricting the ability of ISPs to collaborate. From this model a core / edge separation hierarchical virtual tree based routing protocol based on the physical network topography (layers 2 and 3) is developed to remove this enforced inefficiency by allowing direct management and control at the lowest levels of the network. This model acts as the base layer for further distributed intelligent services such as management and content delivery to enable both ISPs and third parties to actively collaborate and provide content from the most efficient source

FPGA-based architectures for next generation communications networks

This engineering doctorate concerns the application of Field Programmable Gate Array (FPGA) technology to some of the challenges faced in the design of next generation communications networks. The growth and convergence of such networks has fuelled demand for higher bandwidth systems, and a requirement to support a diverse range of payloads across the network span. The research which follows focuses on the development of FPGA-based architectures for two important paradigms in contemporary networking - Forward Error Correction and Packet Classification. The work seeks to combine analysis of the underlying algorithms and mathematical techniques which drive these applications, with an informed approach to the design of efficient FPGA-based circuits

Computer-Mediated Communication

This book is an anthology of present research trends in Computer-mediated Communications (CMC) from the point of view of different application scenarios. Four different scenarios are considered: telecommunication networks, smart health, education, and human-computer interaction. The possibilities of interaction introduced by CMC provide a powerful environment for collaborative human-to-human, computer-mediated interaction across the globe

Design and Analysis of Forward Error Control Coding and Signaling for Guaranteeing QoS in Wireless Broadcast Systems

Broadcasting systems are networks where the transmission is received by several terminals. Generally broadcast receivers are passive devices in the network, meaning that they do not interact with the transmitter. Providing a certain Quality of Service (QoS) for the receivers in heterogeneous reception environment with no feedback is not an easy task. Forward error control coding can be used for protection against transmission errors to enhance the QoS for broadcast services. For good performance in terrestrial wireless networks, diversity should be utilized. The diversity is utilized by application of interleaving together with the forward error correction codes. In this dissertation the design and analysis of forward error control and control signalling for providing QoS in wireless broadcasting systems are studied. Control signaling is used in broadcasting networks to give the receiver necessary information on how to connect to the network itself and how to receive the services that are being transmitted. Usually control signalling is considered to be transmitted through a dedicated path in the systems. Therefore, the relationship of the signaling and service data paths should be considered early in the design phase. Modeling and simulations are used in the case studies of this dissertation to study this relationship. This dissertation begins with a survey on the broadcasting environment and mechanisms for providing QoS therein. Then case studies present analysis and design of such mechanisms in real systems. The mechanisms for providing QoS considering signaling and service data paths and their relationship at the DVB-H link layer are analyzed as the first case study. In particular the performance of different service data decoding mechanisms and optimal signaling transmission parameter selection are presented. The second case study investigates the design of signaling and service data paths for the more modern DVB-T2 physical layer. Furthermore, by comparing the performances of the signaling and service data paths by simulations, configuration guidelines for the DVB-T2 physical layer signaling are given. The presented guidelines can prove useful when configuring DVB-T2 transmission networks. Finally, recommendations for the design of data and signalling paths are given based on findings from the case studies. The requirements for the signaling design should be derived from the requirements for the main services. Generally, these requirements for signaling should be more demanding as the signaling is the enabler for service reception.Siirretty Doriast

Selected Papers from the First International Symposium on Future ICT (Future-ICT 2019) in Conjunction with 4th International Symposium on Mobile Internet Security (MobiSec 2019)

The International Symposium on Future ICT (Future-ICT 2019) in conjunction with the 4th International Symposium on Mobile Internet Security (MobiSec 2019) was held on 17–19 October 2019 in Taichung, Taiwan. The symposium provided academic and industry professionals an opportunity to discuss the latest issues and progress in advancing smart applications based on future ICT and its relative security. The symposium aimed to publish high-quality papers strictly related to the various theories and practical applications concerning advanced smart applications, future ICT, and related communications and networks. It was expected that the symposium and its publications would be a trigger for further related research and technology improvements in this field