4,936 research outputs found
AI and OR in management of operations: history and trends
The last decade has seen a considerable growth in the use of Artificial Intelligence (AI) for operations management with the aim of finding solutions to problems that are increasing in complexity and scale. This paper begins by setting the context for the survey through a historical perspective of OR and AI. An extensive survey of applications of AI techniques for operations management, covering a total of over 1200 papers published from 1995 to 2004 is then presented. The survey utilizes Elsevier's ScienceDirect database as a source. Hence, the survey may not cover all the relevant journals but includes a sufficiently wide range of publications to make it representative of the research in the field. The papers are categorized into four areas of operations management: (a) design, (b) scheduling, (c) process planning and control and (d) quality, maintenance and fault diagnosis. Each of the four areas is categorized in terms of the AI techniques used: genetic algorithms, case-based reasoning, knowledge-based systems, fuzzy logic and hybrid techniques. The trends over the last decade are identified, discussed with respect to expected trends and directions for future work suggested
Monitoring of Tool Wear and Surface Roughness Using ANFIS Method During CNC Turning of CFRP Composite
Carbon fiber-reinforced plastic (CFRP) is gaining wide acceptance in areas including sports, aerospace and automobile industry . Because of its superior mechanical qualities and lower weight than metals, it needs effective and efficient machining methods. In this study, the relationship between the cutting parameters (Speed, Feed, Depth of Cut) and response parameters (Vibration, Surface Finish, Cutting Force and Tool Wear) are investigated for CFRP composite. For machining of CFRP, CNC turning operation with coated carbide tool is used. An ANFIS model with two MISO system has been developed to predict the tool wear and surface finish. Speed, feed, depth of cut, vibration and cutting force have been used as input parameters and tool wear and surface finish have been used as output parameter. Three sets of cutting parameter have been used to gather the data points for continuous turning of CFRP composite. The model merged fuzzy inference modeling with artificial neural network learning abilities, and a set of rules is constructed directly from experimental data. However, Design of Experiments (DOE) confirmation of this experiment fails because of multi-collinearity problem in the dataset and insufficient experimental data points to predict the tool wear and surface roughness effectively using ANFIS methodology. Therefore, the result of this experiment do not provide a proper representation, and result in a failure to conform to a correct DOE approach
Tool wear monitoring using neuro-fuzzy techniques: a comparative study in a turning process
Tool wear detection is a key issue for tool condition monitoring. The maximization of useful tool life is frequently related with the optimization of machining processes. This paper presents two model-based approaches for tool wear monitoring on the basis of neuro-fuzzy techniques. The use of a neuro-fuzzy hybridization to design a tool wear monitoring system is aiming at exploiting the synergy of neural networks and fuzzy logic, by combining human reasoning with learning and connectionist structure. The turning process that is a well-known machining process is selected for this case study. A four-input (i.e., time, cutting forces, vibrations and acoustic emissions signals) single-output (tool wear rate) model is designed and implemented on the basis of three neuro-fuzzy approaches (inductive, transductive and evolving neuro-fuzzy systems). The tool wear model is then used for monitoring the turning process. The comparative study demonstrates that the transductive neuro-fuzzy model provides better error-based performance indices for detecting tool wear than the inductive neuro-fuzzy model and than the evolving neuro-fuzzy model
Applications of Soft Computing in Mobile and Wireless Communications
Soft computing is a synergistic combination of artificial intelligence methodologies to model and solve real world problems that are either impossible or too difficult to model mathematically. Furthermore, the use of conventional modeling techniques demands rigor, precision and certainty, which carry computational cost. On the other hand, soft computing utilizes computation, reasoning and inference to reduce computational cost by exploiting tolerance for imprecision, uncertainty, partial truth and approximation. In addition to computational cost savings, soft computing is an excellent platform for autonomic computing, owing to its roots in artificial intelligence. Wireless communication networks are associated with much uncertainty and imprecision due to a number of stochastic processes such as escalating number of access points, constantly changing propagation channels, sudden variations in network load and random mobility of users. This reality has fuelled numerous applications of soft computing techniques in mobile and wireless communications. This paper reviews various applications of the core soft computing methodologies in mobile and wireless communications
In-process tool wear prediction system development in end milling operations
Three in-process tool wear monitoring systems have been developed in this research. They are: (1) the multiple linear regression based in-process tool wear prediction (MLR-ITWP) system; (2) the artificial neural networks based in-process tool wear prediction (ANN-ITWP) system; and (3) the statistics assisted fuzzy-nets based in-process tool wear prediction (S-FN-ITWP) system.;Before these above-mentioned systems were developed and evaluated, statistical approaches had been implemented to analyze and identify the most significant force signal for tool wearing monitoring system. This study demonstrates that the average peak cutting forces in the Y direction (the direction that is perpendicular to the table feed) is the most effective cutting force representation for tool wear monitoring.;Following with this discovery, the first system (MLR-ITWP system) was developed using a multiple linear regression model through 100 experimental data sets. Another nine data sets were used to test the system. The average tool wear prediction error of the MLR-ITWP system was +/-0.039 mm through the testing data. The second system (ANN-ITWM system) was developed using back-propagation artificial neural network through the same experimental data and tested with another nine data sets. The average tool wear prediction error of this ANN-ITWM system was +/-0.037 mm. The third system (S-FN-ITWM system) was developed using fuzzy-nets assisted statistically through the same experimental data and tested with another nine data sets. The average tool wear prediction error was +/-0.023 mm.;The scope of this research is to provide systems that can be integrated into smart computer numerical control (CNC) machine development in tool monitoring system. The success of this research provides the researcher better position in further related research
Model-based observer proposal for surface roughness monitoring
Comunicación presentada a MESIC 2019 8th Manufacturing Engineering Society International Conference (Madrid, 19-21 de Junio de 2019)In the literature, many different machining monitoring systems for surface roughness and tool condition have been proposed and validated experimentally. However, these approaches commonly require costly equipment and experimentation. In this paper, we propose an alternative monitoring system for surface roughness based on a model-based observer considering simple relationships between tool wear, power consumption and surface roughness. The system estimates the surface roughness according to simple models and updates the estimation fusing the information from quality inspection and power consumption. This monitoring strategy is aligned with the industry 4.0 practices and promotes the fusion of data at different shop-floor levels
Modelling flan wear of carbide tool insert in metal cutting
In this paper theoretical and experimental studies are carried out to investigate the intrinsic relationship between tool flank wear and
operational conditions in metal cutting processes using carbide cutting inserts.Anewflank wear rate model, which combines cutting mechanics
simulation and an empirical model, is developed to predict tool flank wear land width. A set of tool wear cutting tests using hard metal coated
carbide cutting inserts are performed under different operational conditions. The wear of the cutting inset is evaluated and recorded using
Zygo New View 5000 microscope. The results of the experimental studies indicate that cutting speed has a more dramatic effect on tool life
than feed rate. The wear constants in the proposed wear rate model are determined based on the machining data and simulation results. A
good agreements between the predicted and measured tool flank wear land width show that the developed tool wear model can accurately
predict tool flank wear to some extent
Online Tool Condition Monitoring Based on Parsimonious Ensemble+
Accurate diagnosis of tool wear in metal turning process remains an open
challenge for both scientists and industrial practitioners because of
inhomogeneities in workpiece material, nonstationary machining settings to suit
production requirements, and nonlinear relations between measured variables and
tool wear. Common methodologies for tool condition monitoring still rely on
batch approaches which cannot cope with a fast sampling rate of metal cutting
process. Furthermore they require a retraining process to be completed from
scratch when dealing with a new set of machining parameters. This paper
presents an online tool condition monitoring approach based on Parsimonious
Ensemble+, pENsemble+. The unique feature of pENsemble+ lies in its highly
flexible principle where both ensemble structure and base-classifier structure
can automatically grow and shrink on the fly based on the characteristics of
data streams. Moreover, the online feature selection scenario is integrated to
actively sample relevant input attributes. The paper presents advancement of a
newly developed ensemble learning algorithm, pENsemble+, where online active
learning scenario is incorporated to reduce operator labelling effort. The
ensemble merging scenario is proposed which allows reduction of ensemble
complexity while retaining its diversity. Experimental studies utilising
real-world manufacturing data streams and comparisons with well known
algorithms were carried out. Furthermore, the efficacy of pENsemble was
examined using benchmark concept drift data streams. It has been found that
pENsemble+ incurs low structural complexity and results in a significant
reduction of operator labelling effort.Comment: this paper has been published by IEEE Transactions on Cybernetic
An exTS based Neuro-Fuzzy algorithm for prognostics and tool condition monitoring.
International audienceThe growing interest in predictive maintenance makes industrials and researchers turning themselves to artificial intelligence methods for fulfilling the tasks of condition monitoring and prognostics. Within this frame, the general purpose of this paper is to investigate the capabilities of an Evolving eXtended Takagi Sugeno (exTS) based neuro-fuzzy algorithm to predict the tool condition in high-speed machining conditions. The performance of evolving Neuro-Fuzzy model is compared with an Adaptive Neuro-Fuzzy Inference System (ANFIS) and a Multiple Regression Model (MRM) in term of accuracy and reliability through a case study of tool condition monitoring. The reliability of exTS also investigated
- …