Reification: A Process to Configure Java Realtime Processors

Real-time systems require stringent requirements both on the processor and the software application. The primary concern is speed and the predictability of execution times. In all real-time applications the developer must identify and calculate the worst case execution times (WCET) of their software. In almost all cases the processor design complexity impacts the analysis when calculating the WCET. Design features which impact this analysis include cache and instruction pipelining. With both cache and pipelining the time taken for a particular instruction can vary depending on cache and pipeline contents. When calculating the WCET the developer must ignore the speed advantages from these enhancements and use the normal instruction timings. This investigation is about a Java processor targeted to run within an FPGA environment (Java soft chip) supporting Java real-time applications. The investigation focuses on a simple processor design that allows simple analysis of WCET. The processor design has no cache and no instruction pipeline enhancements yet achieves higher performance than existing designs with these enhancements. The investigation centers on a process that translates Java byte codes and folds these translated codes into a modified Harvard Micro Controller (HMC). The modifications include better alignment with the application code and take advantage of the FPGA’s parallel capability. A prototyped ontology is used where the top level categories defined by Sowa are expanded to support the process. The proposed HMC and process are used to produce investigation results. Performance testing using the Sobel edge detection algorithm is used to compare the results with the only Java processor claiming real-time abilities

JavaFlow : a Java DataFlow Machine

textThe JavaFlow, a Java DataFlow Machine is a machine design concept implementing a Java Virtual Machine aimed at addressing technology roadmap issues along with the ability to effectively utilize and manage very large numbers of processing cores. Specific design challenges addressed include: design complexity through a common set of repeatable structures; low power by featuring unused circuits and ability to power off sections of the chip; clock propagation and wire limits by using locality to bring data to processing elements and a Globally Asynchronous Locally Synchronous (GALS) design; and reliability by allowing portions of the design to be bypassed in case of failures. A Data Flow Architecture is used with multiple heterogeneous networks to connect processing elements capable of executing a single Java ByteCode instruction. Whole methods are cached in this DataFlow fabric, and the networks plus distributed intelligence are used for their management and execution. A mesh network is used for the DataFlow transfers; two ordered networks are used for management and control flow mapping; and multiple high speed rings are used to access the storage subsystem and a controlling General Purpose Processor (GPP). Analysis of benchmarks demonstrates the potential for this design concept. The design process was initiated by analyzing SPEC JVM benchmarks which identified a small number methods contributing to a significant percentage of the overall ByteCode operations. Additional analysis established static instruction mixes to prioritize the types of processing elements used in the DataFlow Fabric. The overall objective of the machine is to provide multi-threading performance for Java Methods deployed to this DataFlow fabric. With advances in technology it is envisioned that from 1,000 to 10,000 cores/instructions could be deployed and managed using this structure. This size of DataFlow fabric would allow all the key methods from the SPEC benchmarks to be resident. A baseline configuration is defined with a compressed dataflow structure and then compared to multiple configurations of instruction assignments and clock relationships. Using a series of methods from the SPEC benchmark running independently, IPC (Instructions per Cycle) performance of the sparsely populated heterogeneous structure is 40% of the baseline. The average ratio of instructions to required nodes is 3.5. Innovative solutions to the loading and management of Java methods along with the translation from control flow to DataFlow structure are demonstrated.Electrical and Computer Engineerin

A Co-Processor Approach for Efficient Java Execution in Embedded Systems

This thesis deals with a hardware accelerated Java virtual machine, named REALJava. The REALJava virtual machine is targeted for resource constrained embedded systems. The goal is to attain increased computational performance with reduced power consumption. While these objectives are often seen as trade-offs, in this context both of them can be attained simultaneously by using dedicated hardware. The target level of the computational performance of the REALJava virtual machine is initially set to be as fast as the currently available full custom ASIC Java processors. As a secondary goal all of the components of the virtual machine are designed so that the resulting system can be scaled to support multiple co-processor cores. The virtual machine is designed using the hardware/software co-design paradigm. The partitioning between the two domains is flexible, allowing customizations to the resulting system, for instance the floating point support can be omitted from the hardware in order to decrease the size of the co-processor core. The communication between the hardware and the software domains is encapsulated into modules. This allows the REALJava virtual machine to be easily integrated into any system, simply by redesigning the communication modules. Besides the virtual machine and the related co-processor architecture, several performance enhancing techniques are presented. These include techniques related to instruction folding, stack handling, method invocation, constant loading and control in time domain. The REALJava virtual machine is prototyped using three different FPGA platforms. The original pipeline structure is modified to suit the FPGA environment. The performance of the resulting Java virtual machine is evaluated against existing Java solutions in the embedded systems field. The results show that the goals are attained, both in terms of computational performance and power consumption. Especially the computational performance is evaluated thoroughly, and the results show that the REALJava is more than twice as fast as the fastest full custom ASIC Java processor. In addition to standard Java virtual machine benchmarks, several new Java applications are designed to both verify the results and broaden the spectrum of the tests.Siirretty Doriast

A general framework to realize an abstract machine as an ILP processor with application to java

Ph.DDOCTOR OF PHILOSOPH

Run-time compilation techniques for wireless sensor networks

Wireless sensor networks research in the past decade has seen substantial initiative,support and potential. The true adoption and deployment of such technology is highly dependent on the workforce available to implement such solutions. However, embedded systems programming for severely resource constrained devices, such as those used in typical wireless sensor networks (with tens of kilobytes of program space and around ten kilobytes of memory), is a daunting task which is usually left for experienced embedded developers.Recent initiative to support higher level programming abstractions for wireless sensor networks by utilizing a Java programming paradigm for resource constrained devices demonstrates the development benefits achieved. However, results have shown that an interpreter approach greatly suffers from execution overheads. Run-time compilation techniques are often used in traditional computing to make up for such execution overheads. However, the general consensus in the field is that run-time compilation techniques are either impractical, impossible, complex, or resource hungry for such resource limited devices.In this thesis, I propose techniques to enable run-time compilation for such severely resource constrained devices. More so, I show not only that run-time compilation is in fact both practical and possible by using simple techniques which do not require any more resources than that of interpreters, but also that run-time compilation substantially increases execution efficiency when compared to an interpreter