Aggregation with fragment retransmission for very high-speed WLANs

In upcoming very high-speed WLANs the physical layer (PHY) rate may reach 600 Mbps. To achieve high efficiency at the medium access control (MAC) layer, we identify fundamental properties that must be satisfied by any CSMA/CA based MAC layer and develop a novel scheme called Aggregation with Fragment Retransmission (AFR). In the AFR scheme, multiple packets are aggregated into and transmitted in a single large frame. If errors happen during the transmission, only the corrupted fragments of the large frame are retransmitted. An analytic model is developed to evaluate the throughput and delay performance of AFR over a noisy channel, and to compare AFR with competing schemes in the literature. Optimal frame and fragment sizes are calculated using this model. Transmission delays are minimised by using a zero-waiting mechanism where frames are transmitted immediately once the MAC wins a transmission opportunity. We prove that zero waiting can achieve maximum throughput. As a complement to the theoretical analysis, we investigate by simulations the impact of AFR on the performance of realistic application traffic with diverse requirements. We have implemented the AFR scheme in the NS-2 simulator and present detailed results for TCP, VoIP and HDTV traffic. The AFR scheme described was developed as part of the 802.11n working group work. The analysis presented here is general enough to be extended to the proposed scheme in the upcoming 802.11n standard. Trends indicated by our simulation results should extend to any well-designed aggregation scheme

IEEE Wireless LAN capacity in multicell environments with rate adaptation

Since the advent of the first IEEE 802.11 standard, many research efforts have been spent on evaluating different aspects of the specification. In this paper, we present a new method to predict the capacity of a multicell IEEE 802.11 network. The mechanism takes the effect of co-channel and adjacent channel interference into account. In addition, the study of a common rate adaptation algorithm is included. When the effect of rate adaptation is considered within the throughput computation, the results provided by our algorithm are closer to the measurements obtained in a real scenario. To the best of our knowledge, this paper presents the first analytical study of throughput performance including both types of interferences and the effect of bit rate adaptatio

Contention resolution in wi-fi 6-enabled internet of things based on deep learning

Internet of Things (IoT) is expected to vastly increase the number of connected devices. As a result, a multitude of IoT devices transmit various information through wireless communication technology, such as the Wi-Fi technology, cellular mobile communication technology, low-power wide-area network (LPWAN) technology. However, even the latest Wi-Fi technology is still ready to accommodate these large amounts of data. Accurately setting the contention window (CW) value significantly affects the efficiency of the Wi-Fi network. Unfortunately, the standard collision resolution used by IEEE 802.11ax networks is nonscalable; thus, it cannot maintain stable throughput for an increasing number of stations, even when Wi-Fi 6 has been designed to improve performance in dense scenarios. To this end, we propose a CW control strategy for Wi-Fi 6 systems. This strategy leverages deep learning to search for optimal configuration of CW under different network conditions. Our deep neural network is trained by data generated from a Wi-Fi 6 simulation system with some varying key parameters, e.g., the number of nodes, short interframe space (SIFS), distributed interframe space (DIFS), and data transmission rate. Numerical results demonstrated that our deep learning scheme could always find the optimal CW adjustment multiple by adaptively perceiving the channel competition status. The finalized performance of our model has been significantly improved in terms of system throughput, average transmission delay, and packet retransmission rate. This makes Wi-Fi 6 better adapted to the access of a large number of IoT devices. © 2014 IEEE

Improving the Performance of Wireless LANs

This book quantifies the key factors of WLAN performance and describes methods for improvement. It provides theoretical background and empirical results for the optimum planning and deployment of indoor WLAN systems, explaining the fundamentals while supplying guidelines for design, modeling, and performance evaluation. It discusses environmental effects on WLAN systems, protocol redesign for routing and MAC, and traffic distribution; examines emerging and future network technologies; and includes radio propagation and site measurements, simulations for various network design scenarios, numerous illustrations, practical examples, and learning aids

Improving Performance for CSMA/CA Based Wireless Networks

Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA) based wireless networks are becoming increasingly ubiquitous. With the aim of supporting rich multimedia applications such as high-definition television (HDTV, 20Mbps) and DVD (9.8Mbps), one of the technology trends is towards increasingly higher bandwidth. Some recent IEEE 802.11n proposals seek to provide PHY rates of up to 600 Mbps. In addition to increasing bandwidth, there is also strong interest in extending the coverage of CSMA/CA based wireless networks. One solution is to relay traffic via multiple intermediate stations if the sender and the receiver are far apart. The so called “mesh” networks based on this relay-based approach, if properly designed, may feature both “high speed” and “large coverage” at the same time. This thesis focusses on MAC layer performance enhancements in CSMA/CA based networks in this context. Firstly, we observe that higher PHY rates do not necessarily translate into corresponding increases in MAC layer throughput due to the overhead of the CSMA/CA based MAC/PHY layers. To mitigate the overhead, we propose a novel MAC scheme whereby transported information is partially acknowledged and retransmitted. Theoretical analysis and extensive simulations show that the proposed MAC approach can achieve high efficiency (low MAC overhead) for a wide range of channel variations and realistic traffic types. Secondly, we investigate the close interaction between the MAC layer and the buffer above it to improve performance for real world traffic such as TCP. Surprisingly, the issue of buffer sizing in 802.11 wireless networks has received little attention in the literature yet it poses fundamentally new challenges compared to buffer sizing in wired networks. We propose a new adaptive buffer sizing approach for 802.11e WLANs that maintains a high level of link utilisation, while minimising queueing delay. Thirdly, we highlight that gross unfairness can exist between competing flows in multihop mesh networks even if we assume that orthogonal channels are used in neighbouring hops. That is, even without inter-channel interference and hidden terminals, multi-hop mesh networks which aim to offer a both “high speed” and “large coverage” are not achieved. We propose the use of 802.11e’s TXOP mechanism to restore/enfore fairness. The proposed approach is implementable using off-the-shelf devices and fully decentralised (requires no message passing)

Performance modelling and enhancement of wireless communication protocols

In recent years, Wireless Local Area Networks(WLANs) play a key role in the data communications and networking areas, having witnessed significant research and development. WLANs are extremely popular being almost everywhere including business,office and home deployments.In order to deal with the modem Wireless connectivity needs,the Institute of Electrical and Electronics Engineers(IEEE) has developed the 802.11 standard family utilizing mainly radio transmission techniques, whereas the Infrared Data Association (IrDA) addressed the requirement for multipoint connectivity with the development of the Advanced Infrared(Alr) protocol stack. This work studies the collision avoidance procedures of the IEEE 802.11 Distributed Coordination Function (DCF) protocol and suggests certain protocol enhancements aiming at maximising performance. A new, elegant and accurate analysis based on Markov chain modelling is developed for the idealistic assumption of unlimited packet retransmissions as well as for the case of finite packet retry limits. Simple equations are derived for the through put efficiency, the average packet delay, the probability of a packet being discarded when it reaches the maximum retransmission limit, the average time to drop such a packet and the packet inter-arrival time for both basic access and RTS/CTS medium access schemes.The accuracy of the mathematical model is validated by comparing analytical with OPNET simulation results. An extensive and detailed study is carried out on the influence of performance of physical layer, data rate, packet payload size and several backoff parameters for both medium access mechanisms. The previous mathematical model is extended to take into account transmission errors that can occur either independently with fixed Bit Error Rate(BER) or in bursts. The dependency of the protocol performance on BER and other factors related to independent and burst transmission errors is explored. Furthermore, a simple-implement appropriate tuning of the back off algorithm for maximizing IEEE 802-11 protocol performance is proposed depending on the specific communication requirements. The effectiveness of the RTS/CTS scheme in reducing collision duration at high data rates is studied and an all-purpose expression for the optimal use of the RTS/CTS reservation scheme is derived. Moreover, an easy-to-implement backoff algorithm that significantly enhances performance is introduced and an alternative derivation is developed based on elementary conditional probability arguments rather than bi-dimensional Markov chains. Finally, an additional performance improvement scheme is proposed by employing packet bursting in order to reduce overhead costs such as contention time and RTS/CTSex changes. Fairness is explored in short-time and long-time scales for both the legacy DCF and packet bursting cases. AIr protocol employs the RTS/CTS medium reservation scheme to cope with hidden stations and CSMA/CA techniques with linear contention window (CW) adjustment for medium access. A 1-dimensional Markov chain model is constructed instead of the bi-dimensional model in order to obtain simple mathematical equations of the average packet delay.This new approach greatly simplifies previous analyses and can be applied to any CSMA/CA protocol.The derived mathematical model is validated by comparing analytical with simulation results and an extensive Alr packet delay evaluation is carried out by taking into account all the factors and parameters that affect protocol performance. Finally, suitable values for both backoff and protocol parameters are proposed that reduce average packet delay and, thus, maximize performance

Experimental Performance Evaluation and Frame Aggregation Enhancement in IEEE 802.11n WLANs

The IEEE 802.11n standard promises to extend today’s most popular WLAN standard by significantly increasing reach, reliability, and throughput. Ratified on September 2009, this standard defines many new physical and medium access control (MAC) layer enhancements. These enhancements aim to provide a data transmission rate of up to 600 Mbps. Since June 2007, 802.11n products are available on the enterprise market based on the draft 2.0. In this paper we investigate the effect of most of the proposed 802.11n MAC and physical layer features on the adhoc networks performance. We have performed several experiments in real conditions. The experimental results demonstrated the effectiveness of 802.11n enhancement. We have also examined the interoperability and fairness of 802.11n. The frame aggregation mechanism of 802.11n MAC layer can improve the efficiency of channel utilization by reducing the protocol overheads. We focused on the effect of frame aggregation on the support of voice and video applications in wireless networks. We also propose a new frame aggregation scheduler that considers specific QoS requirements for multimedia applications. We dynamically adjust the aggregated frame size based on frame's access category defined in 802.11e standard

Congestive Loss in Wireless Ad hoc Network: Network Performance Analysis

Communication in wireless network is quite susceptible to mobility, nodes capacity and power consumption level. These might contributes to the major problem of TCP performance degradation where there are highly potential of packet loss and packet reordering. In this research, we manage to observe the impact of packet behavior once the node’s capacity is limited when passing on-going data. This condition occurs when the node’s buffer starts to be overloaded. A simulation study by using OPNET Modeler 14.5 is conducted to achieve the purpose. A static ad hoc topology with the size of users (2n where n=0, 1, 2, 3 and 4) is used to observe several parameters such as throughput, number of packet dropped, retransmission count and end-to-end TCP delay. The results show that the size of buffer for ad hoc node influence the network performance whenever number of users is changed. In future, we plan to extend this study in a way of deeply understanding the effect of mobility in wireless network