D13.2 Techniques and performance analysis on energy- and bandwidth-efficient communications and networking

Deliverable D13.2 del projecte europeu NEWCOM#The report presents the status of the research work of the various Joint Research Activities (JRA) in WP1.3 and the results that were developed up to the second year of the project. For each activity there is a description, an illustration of the adherence to and relevance with the identified fundamental open issues, a short presentation of the main results, and a roadmap for the future joint research. In the Annex, for each JRA, the main technical details on specific scientific activities are described in detail.Peer ReviewedPostprint (published version

High capacity multiuser multiantenna communication techniques

One of the main issues involved in the development of future wireless communication systems is the multiple access technique used to efficiently share the available spectrum among users. In rich multipath environment, spatial dimension can be exploited to meet the increasing number of users and their demands without consuming extra bandwidth and power. Therefore, it is utilized in the multiple-input multiple-output (MIMO) technology to increase the spectral efficiency significantly. However, multiuser MIMO (MU-MIMO) systems are still challenging to be widely adopted in next generation standards. In this thesis, new techniques are proposed to increase the channel and user capacity and improve the error performance of MU-MIMO over Rayleigh fading channel environment. For realistic system design and performance evaluation, channel correlation is considered as one of the main channel impurities due its severe influence on capacity and reliability. Two simple methods called generalized successive coloring technique (GSCT) and generalized iterative coloring technique (GICT) are proposed for accurate generation of correlated Rayleigh fading channels (CRFC). They are designed to overcome the shortcomings of existing methods by avoiding factorization of desired covariance matrix of the Gaussian samples. The superiority of these techniques is demonstrated by extensive simulations of different practical system scenarios. To mitigate the effects of channel correlations, a novel constellation constrained MU-MIMO (CC-MU-MIMO) scheme is proposed using transmit signal design and maximum likelihood joint detection (MLJD) at the receiver. It is designed to maximize the channel capacity and error performance based on principles of maximizing the minimum Euclidean distance (dmin) of composite received signals. Two signal design methods named as unequal power allocation (UPA) and rotation constellation (RC) are utilized to resolve the detection ambiguity caused by correlation. Extensive analysis and simulations demonstrate the effectiveness of considered scheme compared with conventional MU-MIMO. Furthermore, significant gain in SNR is achieved particularly in moderate to high correlations which have direct impact to maintain high user capacity. A new efficient receive antenna selection (RAS) technique referred to as phase difference based selection (PDBS) is proposed for single and multiuser MIMO systems to maximize the capacity over CRFC. It utilizes the received signal constellation to select the subset of antennas with highest (dmin) constellations due to its direct impact on the capacity and BER performance. A low complexity algorithm is designed by employing the Euclidean norm of channel matrix rows with their corresponding phase differences. Capacity analysis and simulation results show that PDBS outperforms norm based selection (NBS) and near to optimal selection (OS) for all correlation and SNR values. This technique provides fast RAS to capture most of the gains promised by multiantenna systems over different channel conditions. Finally, novel group layered MU-MIMO (GL-MU-MIMO) scheme is introduced to exploit the available spectrum for higher user capacity with affordable complexity. It takes the advantages of spatial difference among users and power control at base station to increase the number of users beyond the available number of RF chains. It is achieved by dividing the users into two groups according to their received power, high power group (HPG) and low power group (LPG). Different configurations of low complexity group layered multiuser detection (GL-MUD) and group power allocation ratio (η) are utilized to provide a valuable tradeoff between complexity and overall system performance. Furthermore, RAS diversity is incorporated by using NBS and a new selection algorithm called HPG-PDBS to increase the channel capacity and enhance the error performance. Extensive analysis and simulations demonstrate the superiority of proposed scheme compared with conventional MU-MIMO. By using appropriate value of (η), it shows higher sum rate capacity and substantial increase in the user capacity up to two-fold at target BER and SNR values

Adaptive Coded Modulation Classification and Spectrum Sensing for Cognitive Radio Systems. Adaptive Coded Modulation Techniques for Cognitive Radio Using Kalman Filter and Interacting Multiple Model Methods

The current and future trends of modern wireless communication systems place heavy demands on fast data transmissions in order to satisfy end users’ requirements anytime, anywhere. Such demands are obvious in recent applications such as smart phones, long term evolution (LTE), 4 & 5 Generations (4G & 5G), and worldwide interoperability for microwave access (WiMAX) platforms, where robust coding and modulations are essential especially in streaming on-line video material, social media and gaming. This eventually resulted in extreme exhaustion imposed on the frequency spectrum as a rare natural resource due to stagnation in current spectrum management policies. Since its advent in the late 1990s, cognitive radio (CR) has been conceived as an enabling technology aiming at the efficient utilisation of frequency spectrum that can lead to potential direct spectrum access (DSA) management. This is mainly attributed to its internal capabilities inherited from the concept of software defined radio (SDR) to sniff its surroundings, learn and adapt its operational parameters accordingly. CR systems (CRs) may commonly comprise one or all of the following core engines that characterise their architectures; namely, adaptive coded modulation (ACM), automatic modulation classification (AMC) and spectrum sensing (SS). Motivated by the above challenges, this programme of research is primarily aimed at the design and development of new paradigms to help improve the adaptability of CRs and thereby achieve the desirable signal processing tasks at the physical layer of the above core engines. Approximate modelling of Rayleigh and finite state Markov channels (FSMC) with a new concept borrowed from econometric studies have been approached. Then insightful channel estimation by using Kalman filter (KF) augmented with interacting multiple model (IMM) has been examined for the purpose of robust adaptability, which is applied for the first time in wireless communication systems. Such new IMM-KF combination has been facilitated in the feedback channel between wireless transmitter and receiver to adjust the transmitted power, by using a water-filling (WF) technique, and constellation pattern and rate in the ACM algorithm. The AMC has also benefited from such IMM-KF integration to boost the performance against conventional parametric estimation methods such as maximum likelihood estimate (MLE) for channel interrogation and the estimated parameters of both inserted into the ML classification algorithm. Expectation-maximisation (EM) has been applied to examine unknown transmitted modulation sequences and channel parameters in tandem. Finally, the non-parametric multitaper method (MTM) has been thoroughly examined for spectrum estimation (SE) and SS, by relying on Neyman-Pearson (NP) detection principle for hypothesis test, to allow licensed primary users (PUs) to coexist with opportunistic unlicensed secondary users (SUs) in the same frequency bands of interest without harmful effects. The performance of the above newly suggested paradigms have been simulated and assessed under various transmission settings and revealed substantial improvements

Radio Communications

In the last decades the restless evolution of information and communication technologies (ICT) brought to a deep transformation of our habits. The growth of the Internet and the advances in hardware and software implementations modified our way to communicate and to share information. In this book, an overview of the major issues faced today by researchers in the field of radio communications is given through 35 high quality chapters written by specialists working in universities and research centers all over the world. Various aspects will be deeply discussed: channel modeling, beamforming, multiple antennas, cooperative networks, opportunistic scheduling, advanced admission control, handover management, systems performance assessment, routing issues in mobility conditions, localization, web security. Advanced techniques for the radio resource management will be discussed both in single and multiple radio technologies; either in infrastructure, mesh or ad hoc networks

D13.1 Fundamental issues on energy- and bandwidth-efficient communications and networking

Deliverable D13.1 del projecte europeu NEWCOM#The report presents the current status in the research area of energy- and bandwidth-efficient communications and networking and highlights the fundamental issues still open for further investigation. Furthermore, the report presents the Joint Research Activities (JRAs) which will be performed within WP1.3. For each activity there is the description, the identification of the adherence with the identified fundamental open issues, a presentation of the initial results, and a roadmap for the planned joint research work in each topic.Preprin

Unmanned Aerial Vehicle (UAV)-Enabled Wireless Communications and Networking

The emerging massive density of human-held and machine-type nodes implies larger traffic deviatiolns in the future than we are facing today. In the future, the network will be characterized by a high degree of flexibility, allowing it to adapt smoothly, autonomously, and efficiently to the quickly changing traffic demands both in time and space. This flexibility cannot be achieved when the network’s infrastructure remains static. To this end, the topic of UAVs (unmanned aerial vehicles) have enabled wireless communications, and networking has received increased attention. As mentioned above, the network must serve a massive density of nodes that can be either human-held (user devices) or machine-type nodes (sensors). If we wish to properly serve these nodes and optimize their data, a proper wireless connection is fundamental. This can be achieved by using UAV-enabled communication and networks. This Special Issue addresses the many existing issues that still exist to allow UAV-enabled wireless communications and networking to be properly rolled out

Resource management techniques for sustainable networks with energy harvesting nodes

Premi extraordinari doctorat UPC curs 2015-2016, àmbit Enginyeria de les TICThis dissertation proposes novel techniques for assigning resources of wireless networks by considering that the coverage radii are small, implying that some power consumption sinks not considered so far shouldnow be introduced, and by considering that the devices are battery-powered terminals provided with energy harvesting capabilities. In this framework, two different configurations in terms of harvesting capabilities are considered. First, we assume that the energy source is external and not controllable, e.g. solar energy. In this context, the proposed design should adapt to the energy that is currently being harvested. We also study the effect of having a finite backhaul connection that links the wireless access network with the core network. On the other hand, we propose a design in which the transmitter feeds actively the receivers with energy by transmitting signals that receivers use for recharging their batteries. In this case, the power transfer design should be carried out jointly with the power control strategy for users that receive information as both procedures, transfer of information and transfer of power, are implemented at the transmitter and make use of a common resource, i.e., power. Apart from techniques for assigning the radio resources, this dissertation develops a procedure for switching on and off base stations. Concerning this, it is important to notice that the traffic profile is not constant throughout the day. This is precisely the feature that can be exploited to define a strategy based on a dynamic selection of the base stations to be switched off when the traffic load is low, without affecting the quality experienced by the users. Thanks to this procedure, we are able to deploy smaller energy harvesting sources and smaller batteries and, thus, to reduce the cost of the network deployment. Finally, we derive some procedures to optimize high level decisions of the network operation in which variables from several layers of the protocol stack are involved. In this context, admission control procedures for deciding which user should be connected to which base station are studied, taking into account information of the average channel information, the current battery levels, etc. A multi-tier multi-cell scenario is assumed in which base stations belonging to different tiers have different capabilities, e.g., transmission power, battery size, end energy harvesting source size. A set of strategies that require different computational complexity are derived for scenarios with different user mobility requirements.Aquesta tesis doctoral proposa tècniques per assignar els recursos disponibles a les xarxes wireless considerant que els radis de cobertura són petits, el que implica que altres fonts de consum d’energia no considerades fins al moment s’hagin d’introduir dins els dissenys, i considerant que els dispositius estan alimentats amb bateries finites i que tenen a la seva disposició fonts de energy harvesting. En aquest context, es consideren dues configuracions diferents en funció de les capacitats de l’energia harvesting. En primer lloc, s’assumirà que la font d’energia és externa i incontrolable com, per exemple, l’energia solar. Els dissenys proposats han d’adaptar-se a l’energia que s’està recol·lectant en un precís moment. En segon lloc, es proposa un disseny en el qual el transmissor és capaç d’enviar energia als receptors mitjançant senyals de radiofreqüència dissenyats per aquest fi, energia que és utilitzada per recarregar les bateries. A part de tècniques d’assignació de recursos radio, en aquesta tesis doctoral es desenvolupa un procediment dinàmic per apagar i encendre estacions base. És important notar que el perfil de tràfic no és constant al llarg del dia. Aquest és precisament el patró que es pot explotar per definir una estratègia dinàmica per poder decidir quines estaciones base han de ser apagades, tot això sense afectar la qualitat experimentada pels usuaris. Gràcies a aquest procediment, es possible desplegar fonts d'energy harvesting més petites i bateries més petites. Finalment, aquesta tesis doctoral presenta procediments per optimitzar decisions de nivell més alt que afecten directament al funcionament global de la xarxa d’accés. Per prendre aquestes decisions, es fa ús de diverses variables que pertanyen a diferents capes de la pila de protocols. En aquest context, aquesta tesis aborda el disseny de tècniques de control d’admissió d’usuaris a estacions base en entorns amb múltiples estacions base, basant-se amb la informació estadística dels canals, i el nivell actual de les bateries, entre altres. L'escenari considerat està format per múltiples estacions base, on cada estació base pertany a una família amb diferents capacitats, per exemple, potència de transmissió o mida de la bateria. Es deriven un conjunt de tècniques amb diferents costos computacionals que són d'utilitat per a poder aplicar a escenaris amb diferents mobilitats d’usuaris.Award-winningPostprint (published version

Advanced Trends in Wireless Communications

Physical limitations on wireless communication channels impose huge challenges to reliable communication. Bandwidth limitations, propagation loss, noise and interference make the wireless channel a narrow pipe that does not readily accommodate rapid flow of data. Thus, researches aim to design systems that are suitable to operate in such channels, in order to have high performance quality of service. Also, the mobility of the communication systems requires further investigations to reduce the complexity and the power consumption of the receiver. This book aims to provide highlights of the current research in the field of wireless communications. The subjects discussed are very valuable to communication researchers rather than researchers in the wireless related areas. The book chapters cover a wide range of wireless communication topics