A wideband linear tunable CDTA and its application in field programmable analogue array

This document is the Accepted Manuscript version of the following article: Hu, Z., Wang, C., Sun, J. et al. ‘A wideband linear tunable CDTA and its application in field programmable analogue array’, Analog Integrated Circuits and Signal Processing, Vol. 88 (3): 465-483, September 2016. Under embargo. Embargo end date: 6 June 2017. The final publication is available at Springer via https://link.springer.com/article/10.1007%2Fs10470-016-0772-7 © Springer Science+Business Media New York 2016In this paper, a NMOS-based wideband low power and linear tunable transconductance current differencing transconductance amplifier (CDTA) is presented. Based on the NMOS CDTA, a novel simple and easily reconfigurable configurable analogue block (CAB) is designed. Moreover, using the novel CAB, a simple and versatile butterfly-shaped FPAA structure is introduced. The FPAA consists of six identical CABs, and it could realize six order current-mode low pass filter, second order current-mode universal filter, current-mode quadrature oscillator, current-mode multi-phase oscillator and current-mode multiplier for analog signal processing. The Cadence IC Design Tools 5.1.41 post-layout simulation and measurement results are included to confirm the theory.Peer reviewedFinal Accepted Versio

Low-Voltage High-Linearity Wideband Current Differencing Transconductance Amplifier and Its Application on Current-Mode Active Filter

A low-voltage high-linearity wideband current differencing transconductance amplifier (CDTA) is presented in this paper. The CDTA consists of a current differencing circuit and a cross-coupling transconductance circuit. The PSPICE simulations of the proposed CDTA show a good performance: -3dB frequency bandwith is about 900 MHz, low power consumption is 2.48 mW, input current linear range is ±100 µA and low current-input resistance is less than 20 Ω, high current-output resistance is more than 3 MΩ. PSpice simulations for a current-mode universal filter and a proposed high-order filter are also conducted, and the results verify the validity of the proposed CDTA

Current-Controlled Current-Mode Universal Biquad Employing Multi-Output Transconductors

This paper deals with RC active biquad working in the so-called current mode (CM). The design approach uses only three transconductors (OTA) with the minimum necessary number of outputs and with only three passive grounded elements. The proposed filter has simple circuit configuration providing all standard transfer functions such as high-pass (HP), band-pass (BP), low-pass (LP), band-reject (BR) and all-pass (AP). Electronic tuning and independent adjusting of the quality factor and bandwidth of BP filter is possible. The presented circuits are verified by PSpice simulations utilizing OTAs on transistor level of abstraction. The linear parasitic effects of the real active elements in each suggested circuit are briefly discussed. Experimental verification is also given. Designed networks can be used in many applications such as antialiasing filters, in high-speed data telecommunication systems, for signal processing in the cable modems, in regulation and measurement techniques etc

A Study of Voltage-Mode and Current-Mode Filters Using Modified Current Feedback Operational Amplifier

Abstract A Study of Voltage-Mode and Current-Mode Filters Using Modified Current Feedback Operational Amplifier Xin Cui There is a prevalent use of current-mode (CM) circuit techniques in analog integrated circuit design, in view of the fact that CM circuits offer certain advantages over voltage-mode (VM) circuits in terms of certain performance parameters such as propagation delay, dynamic range, and bandwidth. The characteristics of a CM circuit make it not so vulnerable to the current demands of IC design trends, such as continuously decreased size and lower DC supply voltages. Therefore, some active devices that could be exploited in both CM and VM circuits have drawn a lot of attention, such as the second generation current conveyor (CCII) and operational transconductance amplifier (OTA). However, a large amount of effort has been made on VM circuits due to their dominant form of signal processing in analog circuit design for the past several decades. The concept of network transposition, introduced by Bhattacharyya and Swamy as early as in 1971, is a powerful technique to convert a VM circuit to a CM one and vice-versa, with little physical circuit alteration and retaining the same performance as its voltage-mode counterpart. It is especially attractive in transforming those circuits that employ active devices which are transposes of themselves, such as OTA or CCII-. Recently, it has been shown in the literature that a new active element, the modified current feedback operational amplifier (MCFOA), is also its own transpose, and hence can be used to design both VM and CM circuits. It is also known that using the same MCFOA, four equivalent realizations are possible for synthesizing a VM filter function, and further, corresponding four CM filter realizations can be obtained utilizing transposition. However, no detailed study has been conducted with regard to the relative performance of the four equivalent VM structures or the corresponding four CM structures, particularly from the point of view of the non-idealness or the parasitic effects of MCFOA on the performance. This thesis presents a thorough study on band-pass filter (BPF) and notch filter (NF) implemented with MCFOA both in the voltage-mode and their transposed current-mode counterparts. The transfer functions of the four configurations of voltage-mode circuits, as well as that of the current-mode circuits, should be the same when the MCFOA is ideal. However, in practice, they are influenced by parasitic parameters. Accordingly, the performances of the band-pass and notch filters are influenced remarkably by the parasitic parameters of the active device, namely, MCFOA, especially the parasitic resistances for low frequency applications. These effects are studied by comparing the theoretical and SPICE simulation results of the four configurations of the voltage- and current-mode BPF and NF using non-ideal MCFOA. In addition, an improved MCFOA that reduces the effect of parasitic resistances is proposed. Performance of BPF and NF are compared among the four configurations of voltage- and current-mode circuits using the improved MCFOA. They are also compared with those using the original version of MCFOA. It is shown that the proposed MCFOA yields several improvements on the performance of both VM and CM BPFs, such as more attenuation at the low frequencies, and drastic reduction in the ω_p and Q_p errors. Based on the fact that MCFOA is composed of two CCIIs (CCII+ and CCII-), and FTFN can be realized with minor modifications of CCII-, it is natural to compare the performance of BPF using CCII- and FTFN with that using MCFOA. Thus, BPF using CCII- and FTFN and their transposed circuits are also studied. As mentioned earlier, CCII- is its own transpose. However, FTFN does not have a proposed admittance or a hybrid matrix for us to find its transpose. An attempt to find the admittance matrix of FTFN is explored in this thesis. The results show that FTFN can be used as its own transpose only under ideal conditions. Comparisons of performance of BPFs using the original MCFOA, the proposed MCFOA, and CCII-, as well as among their transposes, are presented. It is shown that BPF using the proposed MCFOA exhibits the best performance

Chemical Current-Conveyor: a new approach in biochemical computation

Biochemical sensors that are low cost, small in size and compatible with integrated circuit technology play an essential part in the drive towards personalised healthcare and the research described in this thesis is concerned with this area of medical instrumentation. A new biochemical measurement system able to sense key properties of biochemical fluids is presented. This new integrated circuit biochemical sensor, called the Chemical Current-Conveyor, uses the ion sensitive field effect transistor as the input sensor combined with the current-conveyor, an analog building-block, to produce a range of measurement systems. The concept of the Chemical Current-Conveyor is presented together with the design and subsequent fabrication of a demonstrator integrated circuit built on conventional 0.35μm CMOS silicon technology. The silicon area of the Chemical Current-Conveyor is (92μm x 172μm) for the N-channel version and (99μm x 165μm) for the P-channel version. Power consumption for the N-channel version is 30μW and 43μW for the P-channel version with a full load of 1MΩ. The maximum sensitivity achieved for pH measurement was 46mV per pH. The potential of the Chemical Current Conveyor as a versatile biochemical integrated circuit, able to produce output information in an appropriate form for direct clinical use has been confirmed by applications including measurement of (i) pH, (ii) buffer index ( ), (iii) urea, (iv) creatinine and (v) urea:creatinine ratio. In all five cases the device has been demonstrated successfully, confirming the validity of the original aim of this research project, namely to produce a versatile and flexible analog circuit for many biochemical measurement applications. Finally, the thesis closes with discussion of another potential application area for the Chemical Current Conveyor and the main contributions can be summarised by the design and development of the first: ISFET based current-conveyor biochemical sensor, called 'Chemical Current Conveyor, CCCII+' has been designed and developed. It is a general purpose biochemical analog building-block for several biochemical measurements. Real-time buffer capacity measurement system, based on the CCCII+, which exploits the imbedded analog computation capability of the CCCII+. Real-time enzyme based CCCII+ namely, Creatinine-CCCII+ and Urea-CCCII+ for real-time monitoring system of renal system. The system can provide outputs of 3 important parameters of the renal system, namely (i) urea concentration, (ii) creatinine concentration, and (ii) urea to creatinine ratio

Realization of Integrable Low- Voltage Companding Filters for Portable System Applications

Undoubtedly, today’s integrated electronic systems owe their remarkable performance primarily to the rapid advancements of digital technology since 1970s. The various important advantages of digital circuits are: its abstraction from the physical details of the actual circuit implementation, its comparative insensitiveness to variations in the manufacturing process, and the operating conditions besides allowing functional complexity that would not be possible using analog technology. As a result, digital circuits usually offer a more robust behaviour than their analog counterparts, though often with area, power and speed drawbacks. Due to these and other benefits, analog functionality has increasingly been replaced by digital implementations. In spite of the advantages discussed above, analog components are far from obsolete and continue to be key components of modern electronic systems. There is a definite trend toward persistent and ubiquitous use of analog electronic circuits in day-to-day life. Portable electronic gadgets, wireless communications and the widespread application of RF tags are just a few examples of contemporary developments. While all of these electronic systems are based on digital circuitry, they heavily rely on analog components as interfaces to the real world. In fact, many modern designs combine powerful digital systems and complementary analog components on a single chip for cost and reliability reasons. Unfortunately, the design of such systems-on-chip (SOC) suffers from the vastly different design styles of analog and digital components. While mature synthesis tools are readily available for digital designs, there is hardly any such support for analog designers apart from wellestablished PSPICE-like circuit simulators. Consequently, though the analog part usually occupies only a small fraction of the entire die area of an SOC, but its design often constitutes a major bottleneck within the entire development process. Integrated continuous-time active filters are the class of continuous-time or analog circuits which are used in various applications like channel selection in radios, anti-aliasing before sampling, and hearing aids etc. One of the figures of merit of a filter is the dynamic range; this is the ratio of the largest to the smallest signal that can be applied at the input of the filter while maintaining certain specified performance. The dynamic range required in the filter varies with the application and is decided by the variation in strength of the desired signal as well as that of unwanted signals that are to be rejected by the filter. It is well known that the power dissipation and the capacitor area of an integrated active filter increases in proportion to its dynamic range. This situation is incompatible with the needs of integrated systems, especially battery operated ones. In addition to this fundamental dependence of power dissipation on dynamic range, the design of integrated active filters is further complicated by the reduction of supply voltage of integrated circuits imposed by the scaling down of technologies to attain twin objective of higher speed and lower power consumption in digital circuits. The reduction in power consumption with decreasing supply voltage does not apply to analog circuits. In fact, considerable innovation is required with a reduced supply voltage even to avoid increasing power consumption for a given signal to noise ratio (S/N). These aspects pose a great hurdle to the active filter designer. A technique which has attracted the attention of circuit designers as a possible route to filters with higher dynamic range per unit power consumption is “companding”. Companding (compression-expansion) filters are a very promising subclass of continuous-time analog filters, where the input (linear) signal is initially compressed before it will be handled by the core (non-linear) system. In order to preserve the linear operation of the whole system, the non-linear signal produced by the core system is converted back to a linear output signal by employing an appropriate output stage. The required compression and expansion operations are performed by employing bipolar transistors in active region or MOS transistors in weak inversion; the systems thus derived are known as logarithmic-domain (logdomain) systems. In case MOS transistors operated in saturation region are employed, the derived structures are known as Square-root domain systems. Finally, the third class of companding filters can also be obtained by employing bipolar transistors in active region or MOS transistors in weak inversion; the derived systems are known as Sinh-domain systems. During the last several years, a significant research effort has been already carried out in the area of companding circuits. This is due to the fact that their main advantages are the capability for operation in low-voltage environment and large dynamic range originated from their companding nature, electronic tunability of the frequency characteristics, absence of resistors and the potential for operations in varied frequency regions.Thus, it is obvious that companding filters can be employed for implementing high-performance analog signal processing in diverse frequency ranges. For example, companding filters could be used for realizing subsystems in: xDSL modems, disk drive read channels, biomedical electronics, Bluetooth/ZigBee applications, phaselocked loops, FM stereo demodulator, touch-tone telephone tone decoder and crossover network used in a three-way high-fidelity loudspeaker etc. A number of design methods for companding filters and their building blocks have been introduced in the literature. Most of the proposed filter structures operate either above 1.5V or under symmetrical (1.5V) power supplies. According to data that provides information about the near future of semiconductor technology, International Technology Roadmap for Semiconductors (ITRS), in 2013, the supply voltage of digital circuits in 32 nm technology will be 0.5 V. Therefore, the trend for the implementation of analog integrated circuits is the usage of low-voltage building blocks that use a single 0.5-1.5V power supply. Therefore, the present investigation was primarily concerned with the study and design of low voltage and low power Companding filters. The work includes the study about: the building blocks required in implementing low voltage and low power Companding filters; the techniques used to realize low voltage and low power Companding filters and their various areas of application. Various novel low voltage and low power Companding filter designs have been developed and studied for their characteristics to be applied in a particular portable area of application. The developed designs include the N-th order universal Companding filter designs, which have been reported first time in the open literature. Further, an endeavor has been made to design Companding filters with orthogonal tuning of performance parameters so that the designs can be simultaneously used for various features. The salient features of each of the developed circuit are described. Electronic tunability is one of the major features of all of the designs. Use of grounded capacitors and resistorless designs in all the cases makes the designs suitable for IC technology. All the designs operate in a low-voltage and low-power environment essential for portable system applications. Unless specified otherwise, all the investigations on these designs are based on the PSPICE simulations using model parameters of the NR100N bipolar transistors and BSIM 0.35μm/TSMC 0.25μm /TSMC 0.18μm CMOS process MOS transistors. The performance of each circuit has been validated by comparing the characteristics obtained using simulation with the results present in the open literature. The proposed designs could not be realized in silicon due to non-availability of foundry facility at the place of study. An effort has already been started to realize some of the designs in silicon and check their applicability in practical circuits. At the basic level, one of the proposed Companding filter designs was implemented using the commercially available transistor array ICs (LM3046N) and was found to verify the theoretical predictions obtained from the simulation results

Interface Circuits for Microsensor Integrated Systems

ca. 200 words; this text will present the book in all promotional forms (e.g. flyers). Please describe the book in straightforward and consumer-friendly terms. [Recent advances in sensing technologies, especially those for Microsensor Integrated Systems, have led to several new commercial applications. Among these, low voltage and low power circuit architectures have gained growing attention, being suitable for portable long battery life devices. The aim is to improve the performances of actual interface circuits and systems, both in terms of voltage mode and current mode, in order to overcome the potential problems due to technology scaling and different technology integrations. Related problems, especially those concerning parasitics, lead to a severe interface design attention, especially concerning the analog front-end and novel and smart architecture must be explored and tested, both at simulation and prototype level. Moreover, the growing demand for autonomous systems gets even harder the interface design due to the need of energy-aware cost-effective circuit interfaces integrating, where possible, energy harvesting solutions. The objective of this Special Issue is to explore the potential solutions to overcome actual limitations in sensor interface circuits and systems, especially those for low voltage and low power Microsensor Integrated Systems. The present Special Issue aims to present and highlight the advances and the latest novel and emergent results on this topic, showing best practices, implementations and applications. The Guest Editors invite to submit original research contributions dealing with sensor interfacing related to this specific topic. Additionally, application oriented and review papers are encouraged.