872 research outputs found
Recurrent Neural Networks For Accurate RSSI Indoor Localization
This paper proposes recurrent neuron networks (RNNs) for a fingerprinting
indoor localization using WiFi. Instead of locating user's position one at a
time as in the cases of conventional algorithms, our RNN solution aims at
trajectory positioning and takes into account the relation among the received
signal strength indicator (RSSI) measurements in a trajectory. Furthermore, a
weighted average filter is proposed for both input RSSI data and sequential
output locations to enhance the accuracy among the temporal fluctuations of
RSSI. The results using different types of RNN including vanilla RNN, long
short-term memory (LSTM), gated recurrent unit (GRU) and bidirectional LSTM
(BiLSTM) are presented. On-site experiments demonstrate that the proposed
structure achieves an average localization error of m with of the
errors under m, which outperforms the conventional KNN algorithms and
probabilistic algorithms by approximately under the same test
environment.Comment: Received signal strength indicator (RSSI), WiFi indoor localization,
recurrent neuron network (RNN), long shortterm memory (LSTM),
fingerprint-based localizatio
Multiple simultaneous Wi-Fi measurements in fingerprinting indoor positioning
The accuracy of fingerprinting-based positioning methods accuracy is limited by the fluctuations in the radio signal intensity mainly due to reflections, refractions, and multipath interference, among other factors. We consider that the fluctuations (often modelled as a Gaussian process for simplification purposes) can be minimized by exploiting the richness of multiple signals collected simultaneously through independent network interfaces. This paper introduces an analysis of Wi-Fi signals' statistics using simultaneous measurements which shows that RSSI values obtained from independent devices are not highly correlated. The low correlation between Wi-Fi interfaces might be exploited to improve the positioning accuracy. The validation of the proposed fingerprinting approach in a real scenario shows that the mean and maximum error in positioning can be reduced by more than 40% when five Wi-Fi interfaces are simultaneously used for fingerprinting.This work has been supported by COMPETE: POCI-01- 0145-FEDER-007043 and FCT—Fundação para a Ciência e Tecnologia within the scope of project UID/CEC/00319/2013, by the Portugal Incentive System for Research and Technological Development in the scope of the projects in co- promotion no 002814/2015 (iFACTORY 2015-2018), and by the José Castillejo mobility grant (CAS16/00072).info:eu-repo/semantics/publishedVersio
Evaluating indoor positioning systems in a shopping mall : the lessons learned from the IPIN 2018 competition
The Indoor Positioning and Indoor Navigation (IPIN) conference holds an annual competition in which indoor localization systems from different research groups worldwide are evaluated empirically. The objective of this competition is to establish a systematic evaluation methodology with rigorous metrics both for real-time (on-site) and post-processing (off-site) situations, in a realistic environment unfamiliar to the prototype developers. For the IPIN 2018 conference, this competition was held on September 22nd, 2018, in Atlantis, a large shopping mall in Nantes (France). Four competition tracks (two on-site and two off-site) were designed. They consisted of several 1 km routes traversing several floors of the mall. Along these paths, 180 points were topographically surveyed with a 10 cm accuracy, to serve as ground truth landmarks, combining theodolite measurements, differential global navigation satellite system (GNSS) and 3D scanner systems. 34 teams effectively competed. The accuracy score corresponds to the third quartile (75th percentile) of an error metric that combines the horizontal positioning error and the floor detection. The best results for the on-site tracks showed an accuracy score of 11.70 m (Track 1) and 5.50 m (Track 2), while the best results for the off-site tracks showed an accuracy score of 0.90 m (Track 3) and 1.30 m (Track 4). These results showed that it is possible to obtain high accuracy indoor positioning solutions in large, realistic environments using wearable light-weight sensors without deploying any beacon. This paper describes the organization work of the tracks, analyzes the methodology used to quantify the results, reviews the lessons learned from the competition and discusses its future
Cooperatively Extending the Range of Indoor Localisation
̶Whilst access to location based information has been mostly possible in the\ud
outdoor arena through the use of GPS, the provision of accurate positioning estimations and\ud
broad coverage in the indoor environment has proven somewhat problematic to deliver.\ud
Considering more time is spent in the indoor environment, the requirement for a solution is\ud
obvious. The topography of an indoor location with its many walls, doors, pillars, ceilings\ud
and floors etc. muffling the signals to \from mobile devices and their tracking devices, is one\ud
of the many barriers to implementation. Moreover the cha racteristically noisy behaviour of\ud
wireless devices such as Bluetooth headsets, cordless phones and microwaves can cause\ud
interference as they all operate in the same band as Wi -Fi devices. The limited range of\ud
tracking devices such as Wireless Access Point s (AP), and the restrictions surrounding their\ud
positioning within a buildings’ infrastructure further exacerbate this issue, these difficulties\ud
provide a fertile research area at present.\ud
The genesis for this research is the inability of an indoor location based system (LBS) to\ud
locate devices beyond the range of the fixed tracking devices. The hypothesis advocates a\ud
solution that extends the range of Indoor LBS using Mobile Devices at the extremities of\ud
Cells that have a priori knowledge of their location, and utilizing these devices to ascertain\ud
the location of devices beyond the range of the fixed tracking device. This results in a\ud
cooperative localisation technique where participating devices come together to aid in the\ud
determination of location of device s which otherwise would be out of scope
RFID Localisation For Internet Of Things Smart Homes: A Survey
The Internet of Things (IoT) enables numerous business opportunities in
fields as diverse as e-health, smart cities, smart homes, among many others.
The IoT incorporates multiple long-range, short-range, and personal area
wireless networks and technologies into the designs of IoT applications.
Localisation in indoor positioning systems plays an important role in the IoT.
Location Based IoT applications range from tracking objects and people in
real-time, assets management, agriculture, assisted monitoring technologies for
healthcare, and smart homes, to name a few. Radio Frequency based systems for
indoor positioning such as Radio Frequency Identification (RFID) is a key
enabler technology for the IoT due to its costeffective, high readability
rates, automatic identification and, importantly, its energy efficiency
characteristic. This paper reviews the state-of-the-art RFID technologies in
IoT Smart Homes applications. It presents several comparable studies of RFID
based projects in smart homes and discusses the applications, techniques,
algorithms, and challenges of adopting RFID technologies in IoT smart home
systems.Comment: 18 pages, 2 figures, 3 table
- …