Towards the Evolution of Novel Vertical-Axis Wind Turbines

Renewable and sustainable energy is one of the most important challenges currently facing mankind. Wind has made an increasing contribution to the world's energy supply mix, but still remains a long way from reaching its full potential. In this paper, we investigate the use of artificial evolution to design vertical-axis wind turbine prototypes that are physically instantiated and evaluated under approximated wind tunnel conditions. An artificial neural network is used as a surrogate model to assist learning and found to reduce the number of fabrications required to reach a higher aerodynamic efficiency, resulting in an important cost reduction. Unlike in other approaches, such as computational fluid dynamics simulations, no mathematical formulations are used and no model assumptions are made.Comment: 14 pages, 11 figure

State of the Art in the Optimisation of Wind Turbine Performance Using CFD

Wind energy has received increasing attention in recent years due to its sustainability and geographically wide availability. The efficiency of wind energy utilisation highly depends on the performance of wind turbines, which convert the kinetic energy in wind into electrical energy. In order to optimise wind turbine performance and reduce the cost of next-generation wind turbines, it is crucial to have a view of the state of the art in the key aspects on the performance optimisation of wind turbines using Computational Fluid Dynamics (CFD), which has attracted enormous interest in the development of next-generation wind turbines in recent years. This paper presents a comprehensive review of the state-of-the-art progress on optimisation of wind turbine performance using CFD, reviewing the objective functions to judge the performance of wind turbine, CFD approaches applied in the simulation of wind turbines and optimisation algorithms for wind turbine performance. This paper has been written for both researchers new to this research area by summarising underlying theory whilst presenting a comprehensive review on the up-to-date studies, and experts in the field of study by collecting a comprehensive list of related references where the details of computational methods that have been employed lately can be obtained

State-of-the-art in aerodynamic shape optimisation methods

Aerodynamic optimisation has become an indispensable component for any aerodynamic design over the past 60 years, with applications to aircraft, cars, trains, bridges, wind turbines, internal pipe flows, and cavities, among others, and is thus relevant in many facets of technology. With advancements in computational power, automated design optimisation procedures have become more competent, however, there is an ambiguity and bias throughout the literature with regards to relative performance of optimisation architectures and employed algorithms. This paper provides a well-balanced critical review of the dominant optimisation approaches that have been integrated with aerodynamic theory for the purpose of shape optimisation. A total of 229 papers, published in more than 120 journals and conference proceedings, have been classified into 6 different optimisation algorithm approaches. The material cited includes some of the most well-established authors and publications in the field of aerodynamic optimisation. This paper aims to eliminate bias toward certain algorithms by analysing the limitations, drawbacks, and the benefits of the most utilised optimisation approaches. This review provides comprehensive but straightforward insight for non-specialists and reference detailing the current state for specialist practitioners

Multiobjective Design Optimization Of Gas Turbine Blade With Emphasis On Internal Cooling

In the design of mechanical components, numerical simulations and experimental methods are commonly used for design creation (or modification) and design optimization. However, a major challenge of using simulation and experimental methods is that they are timeconsuming and often cost-prohibitive for the designer. In addition, the simultaneous interactions between aerodynamic, thermodynamic and mechanical integrity objectives for a particular component or set of components are difficult to accurately characterize, even with the existing simulation tools and experimental methods. The current research and practice of using numerical simulations and experimental methods do little to address the simultaneous “satisficing” of multiple and often conflicting design objectives that influence the performance and geometry of a component. This is particularly the case for gas turbine systems that involve a large number of complex components with complicated geometries. Numerous experimental and numerical studies have demonstrated success in generating effective designs for mechanical components; however, their focus has been primarily on optimizing a single design objective based on a limited set of design variables and associated values. In this research, a multiobjective design optimization framework to solve a set of userspecified design objective functions for mechanical components is proposed. The framework integrates a numerical simulation and a nature-inspired optimization procedure that iteratively perturbs a set of design variables eventually converging to a set of tradeoff design solutions. In this research, a gas turbine engine system is used as the test application for the proposed framework. More specifically, the optimization of the gas turbine blade internal cooling channel configuration is performed. This test application is quite relevant as gas turbine engines serve a iv critical role in the design of the next-generation power generation facilities around the world. Furthermore, turbine blades require better cooling techniques to increase their cooling effectiveness to cope with the increase in engine operating temperatures extending the useful life of the blades. The performance of the proposed framework is evaluated via a computational study, where a set of common, real-world design objectives and a set of design variables that directly influence the set of objectives are considered. Specifically, three objectives are considered in this study: (1) cooling channel heat transfer coefficient, which measures the rate of heat transfer and the goal is to maximize this value; (2) cooling channel air pressure drop, where the goal is to minimize this value; and (3) cooling channel geometry, specifically the cooling channel cavity area, where the goal is to maximize this value. These objectives, which are conflicting, directly influence the cooling effectiveness of a gas turbine blade and the material usage in its design. The computational results show the proposed optimization framework is able to generate, evaluate and identify thousands of competitive tradeoff designs in a fraction of the time that it would take designers using the traditional simulation tools and experimental methods commonly used for mechanical component design generation. This is a significant step beyond the current research and applications of design optimization to gas turbine blades, specifically, and to mechanical components, in general

Development of a multi-objective optimization algorithm based on lichtenberg figures

This doctoral dissertation presents the most important concepts of multi-objective optimization and a systematic review of the most cited articles in the last years of this subject in mechanical engineering. The State of the Art shows a trend towards the use of metaheuristics and the use of a posteriori decision-making techniques to solve engineering problems. This fact increases the demand for algorithms, which compete to deliver the most accurate answers at the lowest possible computational cost. In this context, a new hybrid multi-objective metaheuristic inspired by lightning and Linchtenberg Figures is proposed. The Multi-objective Lichtenberg Algorithm (MOLA) is tested using complex test functions and explicit contrainted engineering problems and compared with other metaheuristics. MOLA outperformed the most used algorithms in the literature: NSGA-II, MOPSO, MOEA/D, MOGWO, and MOGOA. After initial validation, it was applied to two complex and impossible to be analytically evaluated problems. The first was a design case: the multi-objective optimization of CFRP isogrid tubes using the finite element method. The optimizations were made considering two methodologies: i) using a metamodel, and ii) the finite element updating. The last proved to be the best methodology, finding solutions that reduced at least 45.69% of the mass, 18.4% of the instability coefficient, 61.76% of the Tsai-Wu failure index and increased by at least 52.57% the natural frequency. In the second application, MOLA was internally modified and associated with feature selection techniques to become the Multi-objective Sensor Selection and Placement Optimization based on the Lichtenberg Algorithm (MOSSPOLA), an unprecedented Sensor Placement Optimization (SPO) algorithm that maximizes the acquired modal response and minimizes the number of sensors for any structure. Although this is a structural health monitoring principle, it has never been done before. MOSSPOLA was applied to a real helicopter’s main rotor blade using the 7 best-known metrics in SPO. Pareto fronts and sensor configurations were unprecedentedly generated and compared. Better sensor distributions were associated with higher hypervolume and the algorithm found a sensor configuration for each sensor number and metric, including one with 100% accuracy in identifying delamination considering triaxial modal displacements, minimum number of sensors, and noise for all blade sections.Esta tese de doutorado traz os conceitos mais importantes de otimização multi-objetivo e uma revisão sistemática dos artigos mais citados nos últimos anos deste tema em engenharia mecânica. O estado da arte mostra uma tendência no uso de meta-heurísticas e de técnicas de tomada de decisão a posteriori para resolver problemas de engenharia. Este fato aumenta a demanda sobre os algoritmos, que competem para entregar respostas mais precisas com o menor custo computacional possível. Nesse contexto, é proposta uma nova meta-heurística híbrida multi-objetivo inspirada em raios e Figuras de Lichtenberg. O Algoritmo de Lichtenberg Multi-objetivo (MOLA) é testado e comparado com outras metaheurísticas usando funções de teste complexas e problemas restritos e explícitos de engenharia. Ele superou os algoritmos mais utilizados na literatura: NSGA-II, MOPSO, MOEA/D, MOGWO e MOGOA. Após validação, foi aplicado em dois problemas complexos e impossíveis de serem analiticamente otimizados. O primeiro foi um caso de projeto: otimização multi-objetivo de tubos isogrid CFRP usando o método dos elementos finitos. As otimizações foram feitas considerando duas metodologias: i) usando um meta-modelo, e ii) atualização por elementos finitos. A última provou ser a melhor metodologia, encontrando soluções que reduziram pelo menos 45,69% da massa, 18,4% do coeficiente de instabilidade, 61,76% do TW e aumentaram em pelo menos 52,57% a frequência natural. Na segunda aplicação, MOLA foi modificado internamente e associado a técnicas de feature selection para se tornar o Seleção e Alocação ótima de Sensores Multi-objetivo baseado no Algoritmo de Lichtenberg (MOSSPOLA), um algoritmo inédito de Otimização de Posicionamento de Sensores (SPO) que maximiza a resposta modal adquirida e minimiza o número de sensores para qualquer estrutura. Embora isto seja um princípio de Monitoramento da Saúde Estrutural, nunca foi feito antes. O MOSSPOLA foi aplicado na pá do rotor principal de um helicóptero real usando as 7 métricas mais conhecidas em SPO. Frentes de Pareto e configurações de sensores foram ineditamente geradas e comparadas. Melhores distribuições de sensores foram associadas a um alto hipervolume e o algoritmo encontrou uma configuração de sensor para cada número de sensores e métrica, incluindo uma com 100% de precisão na identificação de delaminação considerando deslocamentos modais triaxiais, número mínimo de sensores e ruído para todas as seções da lâmina

Multi-Fidelity Methods for Optimization: A Survey

Real-world black-box optimization often involves time-consuming or costly experiments and simulations. Multi-fidelity optimization (MFO) stands out as a cost-effective strategy that balances high-fidelity accuracy with computational efficiency through a hierarchical fidelity approach. This survey presents a systematic exploration of MFO, underpinned by a novel text mining framework based on a pre-trained language model. We delve deep into the foundational principles and methodologies of MFO, focusing on three core components -- multi-fidelity surrogate models, fidelity management strategies, and optimization techniques. Additionally, this survey highlights the diverse applications of MFO across several key domains, including machine learning, engineering design optimization, and scientific discovery, showcasing the adaptability and effectiveness of MFO in tackling complex computational challenges. Furthermore, we also envision several emerging challenges and prospects in the MFO landscape, spanning scalability, the composition of lower fidelities, and the integration of human-in-the-loop approaches at the algorithmic level. We also address critical issues related to benchmarking and the advancement of open science within the MFO community. Overall, this survey aims to catalyze further research and foster collaborations in MFO, setting the stage for future innovations and breakthroughs in the field.Comment: 47 pages, 9 figure

Multi-Objective structural optimization of repairs of blisk blades

Modern manufacturing technologies offer multiple options to extend the service life of expensive jet engine components through repairs. In this context, the repair processes of blade-integrated disks (blisks) are of particular interest, as the complex design makes replacement of this part very costly. However, currently, repairs of blisks are mainly done manually and repair design decisions still rely on the expertise of maintenance technicians. From a scientific perspective, these subjective, experience-based decisions are a major drawback, as today’s computational methods allow for systematic analysis and evaluation of design alternatives. The present doctoral thesis contributes to the decision-making process related to the repair of blisk blades by blending and patching by providing an engineering optimization framework and simulation routines for structural assessment of different repair designs. First, an object-oriented optimization framework is developed that is ideally suited to address engineering optimization problems such as blisk repair optimization. The design of the software architecture is chosen to achieve a high degree of flexibility and modularity. In particular, the framework provides a unified interface for global and local derivative-free optimization algorithms and custom engineering optimization problems. Thereby, optimization of single- as well as multi-objective problems is supported. The broad applicability of the framework in engineering optimization is demonstrated using examples from wind energy research. Furthermore, the optimization framework forms a suitable environment for structural multi-objective optimization of blend and patch repairs. The second part of this thesis is devoted to the application of the optimization framework to blend repairs of a compressor blisk. The geometry of the removed blade part and the resulting blend is parameterized by three geometric design variables. The two objectives of the optimization correspond to two modal criteria, because especially the vibration behavior of blades is affected by this kind of geometric modification. To check if frequency requirements are harmed by the repair the first objective reflects the deviation of the natural frequencies of the repaired blade to the natural frequencies of the nominal blade. The second objective considers resonance conditions by evaluating the proximity of natural frequencies to excitation frequencies. Pareto optimal repair designs are found by solving the derived optimization problem using appropriate structural mechanics models of a blade sector and employing the developed optimization framework. By analyzing the optimal blend shapes for two different damage patterns, it is shown that the characteristics of Pareto frontiers, like the occurrence of discontinuities, are damage-specific. Therefore, it is concluded that design decisions on blend repairs have to be made on a case-by-case basis. The third part of this thesis is concerned with the multi-objective optimization of patch repairs. While blend repairs change the blade geometry, patch repairs restore the original blade contour. In terms of structural integrity, the most significant modification due to patching is hence associated with the welding process to join patch and blade. The remaining residual stresses, affect the strength of the repaired blade, are therefore the most critical aspect of patch repairs. Utilizing the engineering optimization framework and the parametric simulation model, a multi-objective optimization problem is solved considering the length of the weld and the fatigue strength of the repaired blade. In addition to fatigue strength properties, the weld length is selected as an optimization goal, since the manufacturing effort of the high-tech repair is of practical importance. Pareto optimal repair designs are presented for a damage pattern at the leading edge. The optimization results are further complemented by subsequent thermal and mechanical simulations of the welding and heat treatment process. Different patch geometries are classified from the Pareto optimal solutions. Depending on the preferences in terms of weld length and the High-Cycle Fatigue strength of different load cases, short or long patches are to be used. In addition, the results show that some potential patch designs are not optimal in any case, and therefore can be completely excluded. Finally, the benefits of the unified interface of the engineering optimization framework are emphasized. Different optimization settings of a patch repair optimization are presented and compared utilizing the hypervolume metric. Concluding remarks on the potential of computational methods for improved repair design and an outlook on future maintenance of blisks complete this work.DFG/SFB 871/119 193 472./E