Robust Adaptive Detection of Buried Pipes using GPR

International audienceDetection of buried objects such as pipes using a Ground Penetrating Radar (GPR) is intricate for three main reasons. First, noise is important in the resulting image because of the presence of several rocks and/or layers in the ground, highly influencing the Probability of False Alarm (PFA) level. Also, wave speed and object responses are unknown in the ground and depend on the relative permit-tivity, which is not directly measurable. Finally, the depth of the pipes leads to strong attenuation of the echoed signal, leading to poor SNR scenarios. In this paper, we propose a detection method: (1) enhancing the signal of interest while reducing the noise and layer contributions, and (2) giving a local estimate of the relative permittivity. We derive an adaptive detector where the signal of interest is parametrised by the wave speed in the ground. For this detector, noise is assumed to follow a Spherically Invariant Random Vector (SIRV) distribution in order to obtain a robust detection. We use robust maximum likelihood-type covariance matrix estimators called M-estimators. To handle the significant amount of data, we consider regularised versions of said estimators. Simulation will allow to estimate the relation PFA-Threshold. Comparison is performed with standard GPR processing methods, showing the aptitude of the method in detecting pipes having low response levels with a reasonable PFA

Performance Analysis of Tomographic Methods against Experimental Contactless Multistatic Ground Penetrating Radar

Ground-penetrating radar (GPR) technology for underground exploration consists of the transmission of an electromagnetic signal in the ground for sensing the presence of buried objects. While monostatic or bistatic configurations are usually adopted, a limited number of multistatic GPR systems have been proposed in the scientific literature. In this article, we investigate the recovery performance of a specific and unconventional contactless multistatic GPR system, designed at the Georgia Institute of Technology for the subsurface imaging of antitank and antipersonnel plastic mines. In particular, for the first time, tomographic approaches are tested against this experimental multistatic GPR system, while most GPR processing in the scientific literature processes multimonostatic experimental data sets. First, by mimicking the system at hand, an accurate theoretical as well as numerical analysis is performed in order to estimate the data information content and the performance achievable. Two different tomographic linear approaches are adopted, i.e., the linear sampling method and the Born approximation (BA) method, this latter enhanced by means of the compressive sensing (CS) theoretical framework. Then, the experimental data provided by the Georgia Institute of Technology are processed by means of a multifrequency CS- and BA-based method, thus generating very accurate 3D maps of the investigated underground scenario

Performance Analysis of Tomographic Methods Against Experimental Contactless Multistatic Ground Penetrating Radar

Ground-penetrating radar (GPR) technology for underground exploration consists of the transmission of an electromagnetic signal in the ground for sensing the presence of buried objects. While monostatic or bistatic configurations are usually adopted, a limited number of multistatic GPR systems have been proposed in the scientific literature. In this article, we investigate the recovery performance of a specific and unconventional contactless multistatic GPR system, designed at the Georgia Institute of Technology for the subsurface imaging of antitank and antipersonnel plastic mines. In particular, for the first time, tomographic approaches are tested against this experimental multistatic GPR system, while most GPR processing in the scientific literature processes multimonostatic experimental data sets. First, by mimicking the system at hand, an accurate theoretical as well as numerical analysis is performed in order to estimate the data information content and the performance achievable. Two different tomographic linear approaches are adopted, i.e., the linear sampling method and the Born approximation (BA) method, this latter enhanced by means of the compressive sensing (CS) theoretical framework. Then, the experimental data provided by the Georgia Institute of Technology are processed by means of a multifrequency CS- and BA-based method, thus generating very accurate 3D maps of the investigated underground scenario

Radar Imaging in Challenging Scenarios from Smart and Flexible Platforms

undefine

Using Multi-Azimuth and Multi-Polarization Ground Penetrating Radar to Characterize a Fractured Fault Zone in Mason County, Texas

A multi-azimuth and multi-polarization ground penetrating radar (GPR) survey is carried out to help characterize a fractured fault zone located in Mason County, Texas. A total of 36 lines were acquired on and near the fault zone to try to identify the GPR signature of a complex fracture system. These lines were run through a standard set of processing steps to try to identify the fractures. The results showed that the multi-azimuth survey helped identify the dominant strike of the fractures, which was parallel to the strike of the fault (NE-SW). The multi-polarization survey helped identify the different fills of the fractures. Due to the orientation of the fractures, the PP orientation showed the resistive fractures while the TT orientation showed the conductive fractures. gprMax, a 2-D finite-difference time-domain GPR simulation software, was used to confirm the results seen in the field data. Two 2-D models were created to understand the GPR response of the different fracture fills in the TT orientation. The first model simulated 3 identical fractures with 3 different fracture fills (air, water, clay). Results of this model showed that in the TT orientation, the air filled fractures have the weakest response while the clay filled fractures have the strongest response. The second model simulated the dominant fractures seen in Line A, PP and TT orientations. The results again showed that in the TT orientation, conductive fractures have the strongest response while the resistive fractures have the weakest response, confirming the results from the field data. A geophysical workflow was proposed to help identify buried shallow faults in remote locations. This workflow will help enhance the field observations of an area. The workflow goes from surveying a large area (100s of m) using aeromagnetic data to identifying fractures in a fault zone at cm scale by using GPR method shown in this research

DETERMINE: Novel Radar Techniques for Humanitarian Demining

Today the plague of landmines represent one of the greatest curses of modern time, killing and maiming innocent people every day. It is not easy to provide a global estimate of the problem dimension, however, reported casualties describe that the majority of the victims are civilians, with almost a half represented by children. Among all the technologies that are currently employed for landmine clearance, Ground Penetrating Radar (GPR) is one of those expected to increase the efficiency of operation, even if its high-resolution imaging capability and the possibility of detecting also non-metallic landmines are unfortunately balanced by the high sensor false alarm rate. Most landmines may be considered as multiple layered dielectric cylinders that interact with each other to produce multiple reflections, which will be not the case for other common clutter objects. Considering that each scattering component has its own angular radiation pattern, the research has evaluated the improvements that multistatic configurations could bring to the collected information content. Employing representative landmine models, a number of experimental campaigns have confirmed that GPR is capable of detecting the internal reflections and that the presence of such scattering components could be highlighted changing the antennas offset. In particular, results show that the information that can be extracted relevantly changes with the antenna separation, demonstrating that this approach can provide better confidence in the discrimination and recognition process. The proposed bistatic approach aims at exploiting possible presence of internal structure beneath the target, which for landmines means the activation or detonation assemblies and possible internal material diversity, maintaining a limited acquisition effort. Such bistatic configurations are then included in a conceptual design of a highly flexible GPR system capable of searching for landmines across a large variety of terrains, at reasonably low cost and targeting operators safety

1-D broadside-radiating leaky-wave antenna based on a numerically synthesized impedance surface

A newly-developed deterministic numerical technique for the automated design of metasurface antennas is applied here for the first time to the design of a 1-D printed Leaky-Wave Antenna (LWA) for broadside radiation. The surface impedance synthesis process does not require any a priori knowledge on the impedance pattern, and starts from a mask constraint on the desired far-field and practical bounds on the unit cell impedance values. The designed reactance surface for broadside radiation exhibits a non conventional patterning; this highlights the merit of using an automated design process for a design well known to be challenging for analytical methods. The antenna is physically implemented with an array of metal strips with varying gap widths and simulation results show very good agreement with the predicted performance

Beam scanning by liquid-crystal biasing in a modified SIW structure

A fixed-frequency beam-scanning 1D antenna based on Liquid Crystals (LCs) is designed for application in 2D scanning with lateral alignment. The 2D array environment imposes full decoupling of adjacent 1D antennas, which often conflicts with the LC requirement of DC biasing: the proposed design accommodates both. The LC medium is placed inside a Substrate Integrated Waveguide (SIW) modified to work as a Groove Gap Waveguide, with radiating slots etched on the upper broad wall, that radiates as a Leaky-Wave Antenna (LWA). This allows effective application of the DC bias voltage needed for tuning the LCs. At the same time, the RF field remains laterally confined, enabling the possibility to lay several antennas in parallel and achieve 2D beam scanning. The design is validated by simulation employing the actual properties of a commercial LC medium

Applications of Antenna Technology in Sensors

During the past few decades, information technologies have been evolving at a tremendous rate, causing profound changes to our world and to our ways of living. Emerging applications have opened u[ new routes and set new trends for antenna sensors. With the advent of the Internet of Things (IoT), the adaptation of antenna technologies for sensor and sensing applications has become more important. Now, the antennas must be reconfigurable, flexible, low profile, and low-cost, for applications from airborne and vehicles, to machine-to-machine, IoT, 5G, etc. This reprint aims to introduce and treat a series of advanced and emerging topics in the field of antenna sensors