Automatic Tuning of Digital Circuits.

Variation in transistors is increasing as process technology transistor dimensions shrink. Compounded with lowering supply voltage, this increased variation presents new challenges for the circuit designer. However, this variation also brings many new opportunities for the circuit designer to leverage as well. We present a time-to-digital converter embedded inside a 64-bit processor core, for direct monitoring of on-chip critical paths. This path monitoring allows the processor to monitor process variation and run-time variations. By adjusting to both static and dynamic operating conditions the impact of variations can be reduced. The time-to-digital converter achieves high-resolution measurement in the picosecond range, due to self-calibration via a self-feedback mode. This system is implemented in 45nm silicon and measured silicon results are shown. We also examine techniques for enhanced variation-tolerance in subthreshold digital circuits, applying these to a high fan-in, self-timed transition detection circuit that, due to its self-timing, is able to fully compensate for the large variation in subthreshold. In addition to mitigating variations we also leverage them for random number generation. We demonstrate that the randomness inherent in the oxide breakdown process can be extracted and applied for the specific applications of on-chip ID generation and on-chip true random number generation. By using dynamic automated self-calibrating algorithms that tune and control the on-chip circuitry, we are able to achieve extremely high-quality results. The two systems are implemented in 65 nm silicon. Measured results for the on-chip ID system, called OxID, show a high-degree of randomness and read-stability in the generated IDs, both primary prerequisites of a high-quality on-chip ID system. Measured results for the true random number generator, called OxiGen, show an exceptionally high degree of randomness, passing all fifteen NIST 800-22 tests for randomness with statistical significance and without the aid of a post-processor.Ph.D.Electrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/86390/1/rachliu_1.pd

High Peformance and Low Power On-Die Interconnect Fabrics.

Increasing power density with technology scaling has caused stagnation in operating frequency of modern day microprocessors. This has led designers to prefer multicore architectures over complex monolithic processors to keep up with the demand for rising computing throughput. Although processing units are getting smaller and simpler, the dramatic rise of their count on a single die has made the fabric that connects these processing units increasingly complex. These interconnect fabrics have become a bottleneck in improving overall system effciency. As a result, the design paradigm for multi-core chips is gradually shifting from a core-centric architecture towards an interconnect-centric architecture, where system efficiency is limited by the fabric rather than the processing ability of any individual core. This dissertation introduces three novel and synergistic circuit techniques to improve scalability of switch fabrics to make on-die integration of hundreds to thousands of cores feasible. 1) A matrix topology is proposed for designing a fully connected switch fabric that re-uses output buses for programming, and stores shue congurations at cross points. This significantly reduces routing congestion, lowers area/power, and improves per- formance. Silicon measurements demonstrate 47% energy savings in a 64-lane SIMD processor fabricated in 65nm CMOS over a conventional implementation. 2) A novel approach to handle high radix arbitration along with data routing is proposed. It optimally uses existing cross-bar interconnect resources without requiring any additional overhead. Bandwidth exceeding 2Tb/s is recorded in a test prototype fabricated in 65nm. 3) Building on the later, a new circuit topology to manage and update priority adaptively within the switch fabric without incurring additional delay or area is then proposed. Several assist circuit techniques, such as a thyristor based sense amplifier and self regenerating bi-directional repeaters are proposed for high speed energy efficient signaling to and from the switch fabric to improve overall routing efficiency. Using these techniques a 64 x 64 switch fabric with 128b data bus fabricated in 45nm achieves a throughput of 4.5Tb/s at single cycle latency while operating at 559MHz.Ph.D.Electrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/91506/1/sudhirks_1.pd

Reliable Low-Power High Performance Spintronic Memories

Moores Gesetz folgend, ist es der Chipindustrie in den letzten fünf Jahrzehnten gelungen, ein explosionsartiges Wachstum zu erreichen. Dies hatte ebenso einen exponentiellen Anstieg der Nachfrage von Speicherkomponenten zur Folge, was wiederum zu speicherlastigen Chips in den heutigen Computersystemen führt. Allerdings stellen traditionelle on-Chip Speichertech- nologien wie Static Random Access Memories (SRAMs), Dynamic Random Access Memories (DRAMs) und Flip-Flops eine Herausforderung in Bezug auf Skalierbarkeit, Verlustleistung und Zuverlässigkeit dar. Eben jene Herausforderungen und die überwältigende Nachfrage nach höherer Performanz und Integrationsdichte des on-Chip Speichers motivieren Forscher, nach neuen nichtflüchtigen Speichertechnologien zu suchen. Aufkommende spintronische Spe- ichertechnologien wie Spin Orbit Torque (SOT) und Spin Transfer Torque (STT) erhielten in den letzten Jahren eine hohe Aufmerksamkeit, da sie eine Reihe an Vorteilen bieten. Dazu gehören Nichtflüchtigkeit, Skalierbarkeit, hohe Beständigkeit, CMOS Kompatibilität und Unan- fälligkeit gegenüber Soft-Errors. In der Spintronik repräsentiert der Spin eines Elektrons dessen Information. Das Datum wird durch die Höhe des Widerstandes gespeichert, welche sich durch das Anlegen eines polarisierten Stroms an das Speichermedium verändern lässt. Das Prob- lem der statischen Leistung gehen die Speichergeräte sowohl durch deren verlustleistungsfreie Eigenschaft, als auch durch ihr Standard- Aus/Sofort-Ein Verhalten an. Nichtsdestotrotz sind noch andere Probleme, wie die hohe Zugriffslatenz und die Energieaufnahme zu lösen, bevor sie eine verbreitete Anwendung finden können. Um diesen Problemen gerecht zu werden, sind neue Computerparadigmen, -architekturen und -entwurfsphilosophien notwendig. Die hohe Zugriffslatenz der Spintroniktechnologie ist auf eine vergleichsweise lange Schalt- dauer zurückzuführen, welche die von konventionellem SRAM übersteigt. Des Weiteren ist auf Grund des stochastischen Schaltvorgangs der Speicherzelle und des Einflusses der Prozessvari- ation ein nicht zu vernachlässigender Zeitraum dafür erforderlich. In diesem Zeitraum wird ein konstanter Schreibstrom durch die Bitzelle geleitet, um den Schaltvorgang zu gewährleisten. Dieser Vorgang verursacht eine hohe Energieaufnahme. Für die Leseoperation wird gleicher- maßen ein beachtliches Zeitfenster benötigt, ebenfalls bedingt durch den Einfluss der Prozess- variation. Dem gegenüber stehen diverse Zuverlässigkeitsprobleme. Dazu gehören unter An- derem die Leseintereferenz und andere Degenerationspobleme, wie das des Time Dependent Di- electric Breakdowns (TDDB). Diese Zuverlässigkeitsprobleme sind wiederum auf die benötigten längeren Schaltzeiten zurückzuführen, welche in der Folge auch einen über längere Zeit an- liegenden Lese- bzw. Schreibstrom implizieren. Es ist daher notwendig, sowohl die Energie, als auch die Latenz zur Steigerung der Zuverlässigkeit zu reduzieren, um daraus einen potenziellen Kandidaten für ein on-Chip Speichersystem zu machen. In dieser Dissertation werden wir Entwurfsstrategien vorstellen, welche das Ziel verfolgen, die Herausforderungen des Cache-, Register- und Flip-Flop-Entwurfs anzugehen. Dies erre- ichen wir unter Zuhilfenahme eines Cross-Layer Ansatzes. Für Caches entwickelten wir ver- schiedene Ansätze auf Schaltkreisebene, welche sowohl auf der Speicherarchitekturebene, als auch auf der Systemebene in Bezug auf Energieaufnahme, Performanzsteigerung und Zuver- lässigkeitverbesserung evaluiert werden. Wir entwickeln eine Selbstabschalttechnik, sowohl für die Lese-, als auch die Schreiboperation von Caches. Diese ist in der Lage, den Abschluss der entsprechenden Operation dynamisch zu ermitteln. Nachdem der Abschluss erkannt wurde, wird die Lese- bzw. Schreiboperation sofort gestoppt, um Energie zu sparen. Zusätzlich limitiert die Selbstabschalttechnik die Dauer des Stromflusses durch die Speicherzelle, was wiederum das Auftreten von TDDB und Leseinterferenz bei Schreib- bzw. Leseoperationen re- duziert. Zur Verbesserung der Schreiblatenz heben wir den Schreibstrom an der Bitzelle an, um den magnetischen Schaltprozess zu beschleunigen. Um registerbankspezifische Anforderungen zu berücksichtigen, haben wir zusätzlich eine Multiport-Speicherarchitektur entworfen, welche eine einzigartige Eigenschaft der SOT-Zelle ausnutzt, um simultan Lese- und Schreiboperatio- nen auszuführen. Es ist daher möglich Lese/Schreib- Konfilkte auf Bitzellen-Ebene zu lösen, was sich wiederum in einer sehr viel einfacheren Multiport- Registerbankarchitektur nieder- schlägt. Zusätzlich zu den Speicheransätzen haben wir ebenfalls zwei Flip-Flop-Architekturen vorgestellt. Die erste ist eine nichtflüchtige non-Shadow Flip-Flop-Architektur, welche die Speicherzelle als aktive Komponente nutzt. Dies ermöglicht das sofortige An- und Ausschalten der Versorgungss- pannung und ist daher besonders gut für aggressives Powergating geeignet. Alles in Allem zeigt der vorgestellte Flip-Flop-Entwurf eine ähnliche Timing-Charakteristik wie die konventioneller CMOS Flip-Flops auf. Jedoch erlaubt er zur selben Zeit eine signifikante Reduktion der statis- chen Leistungsaufnahme im Vergleich zu nichtflüchtigen Shadow- Flip-Flops. Die zweite ist eine fehlertolerante Flip-Flop-Architektur, welche sich unanfällig gegenüber diversen Defekten und Fehlern verhält. Die Leistungsfähigkeit aller vorgestellten Techniken wird durch ausführliche Simulationen auf Schaltkreisebene verdeutlicht, welche weiter durch detaillierte Evaluationen auf Systemebene untermauert werden. Im Allgemeinen konnten wir verschiedene Techniken en- twickeln, die erhebliche Verbesserungen in Bezug auf Performanz, Energie und Zuverlässigkeit von spintronischen on-Chip Speichern, wie Caches, Register und Flip-Flops erreichen

Improved Reliability of FPGA-based PUF Identification Generator Design

Physical unclonable functions (PUFs), a form of physical security primitive, enable digital identifiers to be extracted from devices, such as field programmable gate arrays (FPGAs). Many PUF implementations have been proposed to generate these unique n -bit binary strings. However, they often offer insufficient uniqueness and reliability when implemented on FPGAs and can consume excessive resources. To address these problems, in this article we present an efficient, lightweight, and scalable PUF identification (ID) generator circuit that offers a compact design with good uniqueness and reliability properties and is specifically designed for FPGAs. A novel post-characterisation methodology is also proposed that improves the reliability of a PUF without the need for any additional hardware resources. Moreover, the proposed post-characterisation method can be generally used for any FPGA-based PUF designs. The PUF ID generator consumes 8.95% of the hardware resources of a low-cost Xilinx Spartan-6 LX9 FPGA and 0.81% of a Xilinx Artix-7 FPGA. Experimental results show good uniqueness, reliability, and uniformity with no occurrence of bit-aliasing. In particular, the reliability of the PUF is close to 100% over an environmental temperature range of 25°C to 70°C with ± 10% variation in the supply voltage. </jats:p

Multi-core devices for safety-critical systems: a survey

Multi-core devices are envisioned to support the development of next-generation safety-critical systems, enabling the on-chip integration of functions of different criticality. This integration provides multiple system-level potential benefits such as cost, size, power, and weight reduction. However, safety certification becomes a challenge and several fundamental safety technical requirements must be addressed, such as temporal and spatial independence, reliability, and diagnostic coverage. This survey provides a categorization and overview at different device abstraction levels (nanoscale, component, and device) of selected key research contributions that support the compliance with these fundamental safety requirements.This work has been partially supported by the Spanish Ministry of Economy and Competitiveness under grant TIN2015-65316-P, Basque Government under grant KK-2019-00035 and the HiPEAC Network of Excellence. The Spanish Ministry of Economy and Competitiveness has also partially supported Jaume Abella under Ramon y Cajal postdoctoral fellowship (RYC-2013-14717).Peer ReviewedPostprint (author's final draft

High-Performance Energy-Efficient and Reliable Design of Spin-Transfer Torque Magnetic Memory

In this dissertation new computing paradigms, architectures and design philosophy are proposed and evaluated for adopting the STT-MRAM technology as highly reliable, energy efficient and fast memory. For this purpose, a novel cross-layer framework from the cell-level all the way up to the system- and application-level has been developed. In these framework, the reliability issues are modeled accurately with appropriate fault models at different abstraction levels in order to analyze the overall failure rates of the entire memory and its Mean Time To Failure (MTTF) along with considering the temperature and process variation effects. Design-time, compile-time and run-time solutions have been provided to address the challenges associated with STT-MRAM. The effectiveness of the proposed solutions is demonstrated in extensive experiments that show significant improvements in comparison to state-of-the-art solutions, i.e. lower-power, higher-performance and more reliable STT-MRAM design

MANAGING AND LEVERAGING VARIATIONS AND NOISE IN NANOMETER CMOS

Advanced CMOS technologies have enabled high density designs at the cost of complex fabrication process. Variation in oxide thickness and Random Dopant Fluctuation (RDF) lead to variation in transistor threshold voltage Vth. Current photo-lithography process used for printing decreasing critical dimensions result in variation in transistor channel length and width. A related challenge in nanometer CMOS is that of on-chip random noise. With decreasing threshold voltage and operating voltage; and increasing operating temperature, CMOS devices are more sensitive to random on-chip noise in advanced technologies. In this thesis, we explore novel circuit techniques to manage the impact of process variation in nanometer CMOS technologies. We also analyze the impact of on-chip noise on CMOS circuits and propose techniques to leverage or manage impact of noise based on the application. True Random Number Generator (TRNG) is an interesting cryptographic primitive that leverages on-chip noise to generate random bits; however, it is highly sensitive to process variation. We explore novel metastability circuits to alleviate the impact of variations and at the same time leverage on-chip noise sources like Random Thermal Noise and Random Telegraph Noise (RTN) to generate high quality random bits. We develop stochastic models for metastability based TRNG circuits to analyze the impact of variation and noise. The stochastic models are used to analyze and compare low power, energy efficient and lightweight post-processing techniques targeted to low power applications like System on Chip (SoC) and RFID. We also propose variation aware circuit calibration techniques to increase reliability. We extended this technique to a more generic application of designing Post-Si Tunable (PST) clock buffers to increase parametric yield in the presence of process variation. Apart from one time variation due to fabrication process, transistors undergo constant change in threshold voltage due to aging/wear-out effects and RTN. Process variation affects conventional sensors and introduces inaccuracies during measurement. We present a lightweight wear-out sensor that is tolerant to process variation and provides a fine grained wear-out sensing. A similar circuit is designed to sense fluctuation in transistor threshold voltage due to RTN. Although thermal noise and RTN are leveraged in applications like TRNG, they affect the stability of sensitive circuits like Static Random Access Memory (SRAM). We analyze the impact of on-chip noise on Bit Error Rate (BER) and post-Si test coverage of SRAM cells

Heterogeneous Reconfigurable Fabrics for In-circuit Training and Evaluation of Neuromorphic Architectures

A heterogeneous device technology reconfigurable logic fabric is proposed which leverages the cooperating advantages of distinct magnetic random access memory (MRAM)-based look-up tables (LUTs) to realize sequential logic circuits, along with conventional SRAM-based LUTs to realize combinational logic paths. The resulting Hybrid Spin/Charge FPGA (HSC-FPGA) using magnetic tunnel junction (MTJ) devices within this topology demonstrates commensurate reductions in area and power consumption over fabrics having LUTs constructed with either individual technology alone. Herein, a hierarchical top-down design approach is used to develop the HSCFPGA starting from the configurable logic block (CLB) and slice structures down to LUT circuits and the corresponding device fabrication paradigms. This facilitates a novel architectural approach to reduce leakage energy, minimize communication occurrence and energy cost by eliminating unnecessary data transfer, and support auto-tuning for resilience. Furthermore, HSC-FPGA enables new advantages of technology co-design which trades off alternative mappings between emerging devices and transistors at runtime by allowing dynamic remapping to adaptively leverage the intrinsic computing features of each device technology. HSC-FPGA offers a platform for fine-grained Logic-In-Memory architectures and runtime adaptive hardware. An orthogonal dimension of fabric heterogeneity is also non-determinism enabled by either low-voltage CMOS or probabilistic emerging devices. It can be realized using probabilistic devices within a reconfigurable network to blend deterministic and probabilistic computational models. Herein, consider the probabilistic spin logic p-bit device as a fabric element comprising a crossbar-structured weighted array. The Programmability of the resistive network interconnecting p-bit devices can be achieved by modifying the resistive states of the array\u27s weighted connections. Thus, the programmable weighted array forms a CLB-scale macro co-processing element with bitstream programmability. This allows field programmability for a wide range of classification problems and recognition tasks to allow fluid mappings of probabilistic and deterministic computing approaches. In particular, a Deep Belief Network (DBN) is implemented in the field using recurrent layers of co-processing elements to form an n x m1 x m2 x ::: x mi weighted array as a configurable hardware circuit with an n-input layer followed by i ≥ 1 hidden layers. As neuromorphic architectures using post-CMOS devices increase in capability and network size, the utility and benefits of reconfigurable fabrics of neuromorphic modules can be anticipated to continue to accelerate

Within-Die Delay Variation Measurement And Analysis For Emerging Technologies Using An Embedded Test Structure

Both random and systematic within-die process variations (PV) are growing more severe with shrinking geometries and increasing die size. Escalation in the variations in delay and power with reductions in feature size places higher demands on the accuracy of variation models. Their availability can be used to improve yield, and the corresponding profitability and product quality of the fabricated integrated circuits (ICs). Sources of within-die variations include optical source limitations, and layout-based systematic effects (pitch, line-width variability, and microscopic etch loading). Unfortunately, accurate models of within-die PVs are becoming more difficult to derive because of their increasingly sensitivity to design-context. Embedded test structures (ETS) continue to play an important role in the development of models of PVs and as a mechanism to improve correlations between hardware and models. Variations in path delays are increasing with scaling, and are increasingly affected by neighborhood\u27 interactions. In order to fully characterize within-die variations, delays must be measured in the context of actual core-logic macros. Doing so requires the use of an embedded test structure, as opposed to traditional scribe line test structures such as ring oscillators (RO). Accurate measurements of within-die variations can be used, e.g., to better tune models to actual hardware (model-to-hardware correlations). In this research project, I propose an embedded test structure called REBEL (Regional dELay BEhavior) that is designed to measure path delays in a minimally invasive fashion; and its architecture measures the path delays more accurately. Design for manufacture-ability (DFM) analysis is done on the on 90 nm ASIC chips and 28nm Zynq 7000 series FPGA boards. I present ASIC results on within-die path delay variations in a floating-point unit (FPU) fabricated in IBM\u27s 90 nm technology, with 5 pipeline stages, used as a test vehicle in chip experiments carried out at nine different temperature/voltage (TV) corners. Also experimental data has been analyzed for path delay variations in short vs long paths. FPGA results on within-die variation and die-to-die variations on Advanced Encryption System (AES) using single pipelined stage are also presented. Other analysis that have been performed on the calibrated path delays are Flip Flop propagation delays for both rising and falling edge (tpHL and tpLH), uncertainty analysis, path distribution analysis, short versus long path variations and mid-length path within-die variation. I also analyze the impact on delay when the chips are subjected to industrial-level temperature and voltage variations. From the experimental results, it has been established that the proposed REBEL provides capabilities similar to an off-chip logic analyzer, i.e., it is able to capture the temporal behavior of the signal over time, including any static and dynamic hazards that may occur on the tested path. The ASIC results further show that path delays are correlated to the launch-capture (LC) interval used to time them. Therefore, calibration as proposed in this work must be carried out in order to obtain an accurate analysis of within-die variations. Results on ASIC chips show that short paths can vary up to 35% on average, while long paths vary up to 20% at nominal temperature and voltage. A similar trend occurs for within-die variations of mid-length paths where magnitudes reduced to 20% and 5%, respectively. The magnitude of delay variations in both these analyses increase as temperature and voltage are changed to increase performance. The high level of within-die delay variations are undesirable from a design perspective, but they represent a rich source of entropy for applications that make use of \u27secrets\u27 such as authentication, hardware metering and encryption. Physical unclonable functions (PUFs) are a class of primitives that leverage within-die-variations as a means of generating random bit strings for these types of applications, including hardware security and trust. Zynq FPGAs Die-to-Die and within-die variation study shows that on average there is 5% of within-Die variation and the range of die-to-Die variation can go upto 3ns. The die-to-Die variations can be explored in much further detail to study the variations spatial dependance. Additionally, I also carried out research in the area data mining to cater for big data by focusing the work on decision tree classification (DTC) to speed-up the classification step in hardware implementation. For this purpose, I devised a pipelined architecture for the implementation of axis parallel binary decision tree classification for meeting up with the requirements of execution time and minimal resource usage in terms of area. The motivation for this work is that analyzing larger data-sets have created abundant opportunities for algorithmic and architectural developments, and data-mining innovations, thus creating a great demand for faster execution of these algorithms, leading towards improving execution time and resource utilization. Decision trees (DT) have since been implemented in software programs. Though, the software implementation of DTC is highly accurate, the execution times and the resource utilization still require improvement to meet the computational demands in the ever growing industry. On the other hand, hardware implementation of DT has not been thoroughly investigated or reported in detail. Therefore, I propose a hardware acceleration of pipelined architecture that incorporates the parallel approach in acquiring the data by having parallel engines working on different partitions of data independently. Also, each engine is processing the data in a pipelined fashion to utilize the resources more efficiently and reduce the time for processing all the data records/tuples. Experimental results show that our proposed hardware acceleration of classification algorithms has increased throughput, by reducing the number of clock cycles required to process the data and generate the results, and it requires minimal resources hence it is area efficient. This architecture also enables algorithms to scale with increasingly large and complex data sets. We developed the DTC algorithm in detail and explored techniques for adapting it to a hardware implementation successfully. This system is 3.5 times faster than the existing hardware implementation of classification.\u2