11 research outputs found
Improving Hosting Capacity of Rooftop PVs by Quadratic Control of an LV-Central BSS
High integration of rooftop photovoltaic (PV) plants in distribution systems leads to new technical challenges: reverse-active power and voltage rise in low-voltage (LV) and medium-voltage (MV) grids. These challenges limit the maximum amount of power can be produced by PVs in LV and MV grids, called the hosting capacity (HC). Battery storage systems (BSSs) have been used in many studies to decrease the reverse power and improve the HC by controlling the active power. However, the influence of a central BSS on the HC can be greatly improved by using a quadratic power control, simultaneous active and reactive power control, and by selecting of the optimal battery size, the converter size, and the place of the central BSS. The effectiveness of the quadratic power control was not seen in previous works due to the fact that grids with one level of voltage without modeling of MV/LV transformers were simulated. This paper develops a method to select the optimal size of the battery and converter unit as well as the optimal place of an LV-central BSS having an optimal quadratic power control. The simulation results show considerable effects of the optimal selection of an LV-central BSS on the HC improvement.QC 20180327</p
Towards Flexible Distribution Systems : Future Adaptive Management Schemes
During the ongoing evolution of energy systems toward increasingly flexible, resilient, and digitalized distribution systems, many issues need to be developed. In general, a holistic multi-level systemic view is required on the future enabling technologies, control and management methods, operation and planning principles, regulation as well as market and business models. Increasing integration of intermittent renewable generation and electric vehicles, as well as industry electrification during the evolution, requires a huge amount of flexibility services at multiple time scales and from different voltage levels, resources, and sectors. Active use of distribution network-connected flexible energy resources for flexibility services provision through new marketplaces will also be needed. Therefore, increased collaboration between system operators in operation and planning of the future power system will also become essential during the evolution. In addition, use of integrated cyber-secure, resilient, cost-efficient, and advanced communication technologies and solutions will be of key importance. This paper describes a potential three-stage evolution path toward fully flexible, resilient, and digitalized electricity distribution networks. A special focus of this paper is the evolution and development of adaptive control and management methods as well as compatible collaborative market schemes that can enable the improved provision of flexibility services by distribution network-connected flexible energy resources for local (distribution system operator) and system-wide (transmission system operator) needs.© 2021 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).fi=vertaisarvioitu|en=peerReviewed
Solutions to Increase PV Hosting Capacity and Provision of Services from Flexible Energy Resources
Future smart grids will be more dynamic with many variabilities related to generation, inertia, and topology changes. Therefore, more flexibility in form of several active and reactive power related technical services from different distributed energy resources (DER) will be needed for local (distribution network) and whole system (transmission network) needs. However, traditional distribution network operation and control principles are limiting the Photovoltaic (PV) hosting capacity of LV networks and the DER capability to provide system-wide technical services in certain situations. New active and adaptive control principles are needed in order to overcome these limitations. This paper studies and proposes solutions for adaptive settings and management schemes to increase PV hosting capacity and improve provision of frequency support related services by flexible energy resources. The studies show that unwanted interactions between different DER units and their control functions can be avoided with the proposed adaptive control methods. Simultaneously, also better distribution network PV hosting capacity and flexibility services provision from DER units even during very low load situations can be achieved.© 2020 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).fi=vertaisarvioitu|en=peerReviewed
Recommended from our members
A comprehensive review of renewables and electric vehicles hosting capacity in active distribution networks
© Copyright 2023 The Author(s). The excessive integration of renewable distributed generation (RDG) and electric vehicles (EVs) could be considered the two most problematic elements representing the greatest threat to the distribution network (DN) technical operation. In order to avoid going beyond technical limitations, the term hosting capacity (HC) was proposed to define the highest permitted amount of distributed generation (DG) or EVs that can be integrated safely into the DN. The connection of RDGs was first brought to the attention of researchers and DN operators since it accounts for the most notable portion of these technical issues. Hence, the phrase ‘DG-HC’ was initially proposed and evolved significantly over the last few years. Currently, EV integration in most DNs worldwide is still low, but given the worldwide support for clean transportation options, expectations are raised for a significant increase. As a result, it is anticipated that over the next years, the effect of EV integration on the DN will be highly noticeable, requiring greater attention from researchers and DN operators to define the accepted limits of EV penetration levels, ‘EV-HC,’ which is expected to pass along the same line of DG-HC. This article provides an in-depth review of both DG-HC and EV-HC. It first analyses how the DG-HC research has grown over the years and then studies the published EV-HC papers, illustrating to what extent there is a similarity between them and, finally, employs these analyses to expect future development in the EV-HC research area. This article includes the different uses of the term HC, the most common performance indices of DG-HC, the various methods for assessing DG-HC, the different techniques for DG-HC enhancement, the effects of integrating EVs on the DG-HC, and finally, calculating and enhancing methods for EV-HC
Impact Analysis and Mitigation of Voltage Regulation Issues in PV Rich Low Voltage Residential Distribution Networks
Modern distribution networks are undergoing major changes with the increased uptake of rooftop photovoltaic (PV) units in low voltage (LV) residential distribution networks. These renewable based distributed energy resources (DERs) impose adverse effects which can propagate from LV to medium voltage (MV) and high voltage (HV) levels. Some of the major areas of concern to network operators include reverse power flow, voltage unbalance, voltage rise, increased harmonics, increased potential of islanding, and component and line overloading. These issues create both an operational mitigation requirement and a need for Distribution Network Service Providers (DNSPs) to adjust LV network design procedures.
In Australia DNSPs are bound by strict regulation to provide supply to customers complying with several power quality standards. Australian Standard AS 61000.3.100 requires the voltage at the consumer point of supply to be within +10%, -6% of the 230 V nominal for single phase LV customers. Since residential peak load is typically observed during evening time and power generated from PV during daytime, rooftop PV does little to reduce peak demand. Increased numbers of rooftop PV systems in future LV feeders, combined with increased demand, means DNSPs need to invest in infrastructure to alleviate issues related to overgeneration or overloading and voltage regulation.
Traditionally, voltage regulation devices such as on-load tap changers (OLTCs), regulators and capacitor banks have been sufficient to regulate voltage within mandated limits. Bidirectional power flow that arises as a result of DER in LV limits the ability of these devices, as LV voltage issues cannot be detected or do not propagate further up the network. Compared to HV/MV networks, residential LV networks experience more variable loads, have inherent unbalance due to the overhead 4-wire structure, and lack visibility with respect to operational states.
This thesis aims to contribute new knowledge and understanding to the field of power distribution network voltage regulation. This includes investigation and analysis of different approaches to voltage regulation in power distribution networks in the literature, and to propose new methods and improvements to existing methods. Specifically, this thesis aims to highlight the shortcomings of the current voltage regulation techniques available to DNSPs in LV feeder. The case studies to be provided in this thesis presents 24 h time series simulation to investigate the performance with varying load and PV generation
Improving Grid Hosting Capacity and Inertia Response with High Penetration of Renewable Generation
To achieve a more sustainable supply of electricity, utilizing renewable energy resources is a promising solution. However, the inclusion of intermittent renewable energy resources in electric power systems, if not appropriately managed and controlled, will raise a new set of technical challenges in both voltage and frequency control and jeopardizes the reliability and stability of the power system, as one of the most critical infrastructures in the today’s world. This dissertation aims to answer how to achieve high penetration of renewable generations in the entire power system without jeopardizing its security and reliability. First, we tackle the data insufficiency in testing new methods and concepts in renewable generation integration and develop a toolkit to generate any number of synthetic power grids feathering the same properties of real power grids. Next, we focus on small-scale PV systems as the most growing renewable generation in distribution networks and develop a detailed impact assessment framework to examine its impacts on the system and provide installation scheme recommendations to improve the hosting capacity of PV systems in the distribution networks. Following, we examine smart homes with rooftop PV systems and propose a new demand side management algorithm to make the best use of distributed renewable energy. Finally, the findings in the aforementioned three parts have been incorporated to solve the challenge of inertia response and hosting capacity of renewables in transmission network