Efficient binary reconstruction for non destructive evaluation using gammagraphy

International audienceThe localization and the sizing of 3D flaws within a homogeneous metallic media is a major task for non destructive evaluation (NDE). This paper adresses the problem of the reconstruction of such flaws using an efficient binary algorithm. Basically, the method rests on the fact that a simple binary constraint suffices for an accurate and robust reconstructions in the context of NDE. A heuristic minimization, computationally attractive, is designed in order to provide fast reconstructions. The proposed algorithm is compared with standard binary (the iterated conditional mode algorithm) and non binary (penalized approach with convex potentials Gibbs random fields) reconstruction techniques

Signal processing for guided wave structural health monitoring

The importance of Structural Health Monitoring (SHM) in several industrial fields has been continuously growing in the last few years with the increasing need for the development of systems able to monitor continuously the integrity of complex structures. In order to be competitive with conventional non destructive evaluation techniques, SHM must be able to effectively detect the occurrence of damage in the structure, giving information regarding the damage location. Ultrasonic guided waves offer the possibility of inspecting large areas of structures from a small number of sensor positions. However, inspection of complex structures is difficult as the reflections from different features overlap. Therefore damage detection becomes an extremely challenging problem and robust signal processing is required in order to resolve strongly overlapping echoes. In our work we have considered at first the possibility of employing a deconvolution approach for enhancing the resolution of ultrasonic time traces and the potential and the limitations of this approach for reliable SHM applications have been shown. The effects of noise on the bandwidth of the typical signals in SHM and the effects of frequency dependent phase shifts are the main detrimental issues that strongly reduce the performance of deconvolution in SHM applications. The second part of this thesis is concerned with the evaluation of a subtraction approach for SHM when changes of environmental conditions are taken into account. Temperature changes result in imperfect subtraction even for an undamaged structure, since temperature changes modify the mechanical properties of the material and therefore the velocity of propagation of ultrasonic guided waves. Compensation techniques have previously been used effectively to overcome temperature effects, in order to reduce the residual in the subtraction. In this work the performance of temperature compensation techniques has been evaluated also in the presence of other detrimental effects, such as liquid loading and different temperature responses of materials in adhesive joints. Numerical simulations and experiments have been conducted and it has been shown that temperature compensation techniques can cope in principle with non temperature effects. It is concluded that subtraction approach represents a promising method for reliable Structural Health Monitoring. Nonetheless the feasibility of a subtraction approach for SHM depends on environmental conditions

Simulation Studies of Digital Filters for the Phase-II Upgrade of the Liquid-Argon Calorimeters of the ATLAS Detector at the High-Luminosity LHC

Am Large Hadron Collider und am ATLAS-Detektor werden umfangreiche Aufrüstungsarbeiten vorgenommen. Diese Arbeiten sind in mehrere Phasen gegliedert und umfassen unter Anderem Änderungen an der Ausleseelektronik der Flüssigargonkalorimeter; insbesondere ist es geplant, während der letzten Phase ihren Primärpfad vollständig auszutauschen. Die Elektronik besteht aus einem analogen und einem digitalen Teil: während ersterer die Signalpulse verstärkt und sie zur leichteren Abtastung verformt, führt letzterer einen Algorithmus zur Energierekonstruktion aus. Beide Teile müssen während der Aufrüstung verbessert werden, damit der Detektor interessante Kollisionsereignisse präzise rekonstruieren und uninteressante effizient verwerfen kann. In dieser Dissertation werden Simulationsstudien präsentiert, die sowohl die analoge als auch die digitale Auslese der Flüssigargonkalorimeter optimieren. Die Korrektheit der Simulation wird mithilfe von Kalibrationsdaten geprüft, die im sog. Run 2 des ATLAS-Detektors aufgenommen worden sind. Der Einfluss verschiedener Parameter der Signalverformung auf die Energieauflösung wird analysiert und die Nützlichkeit einer erhöhten Abtastrate von 80 MHz untersucht. Des Weiteren gibt diese Arbeit eine Übersicht über lineare und nichtlineare Energierekonstruktionsalgorithmen. Schließlich wird eine Auswahl von ihnen hinsichtlich ihrer Leistungsfähigkeit miteinander verglichen. Es wird gezeigt, dass ein Erhöhen der Ordnung des Optimalfilters, der gegenwärtig verwendete Algorithmus, die Energieauflösung um 2 bis 3 % verbessern kann, und zwar in allen Regionen des Detektors. Der Wiener Filter mit Vorwärtskorrektur, ein nichtlinearer Algorithmus, verbessert sie um bis zu 10 % in einigen Regionen, verschlechtert sie aber in anderen. Ein Zusammenhang dieses Verhaltens mit der Wahrscheinlichkeit fälschlich detektierter Kalorimetertreffer wird aufgezeigt und mögliche Lösungen werden diskutiert.:1 Introduction 2 An Overview of High-Energy Particle Physics 2.1 The Standard Model of Particle Physics 2.2 Verification of the Standard Model 2.3 Beyond the Standard Model 3 LHC, ATLAS, and the Liquid-Argon Calorimeters 3.1 The Large Hadron Collider 3.2 The ATLAS Detector 3.3 The ATLAS Liquid-Argon Calorimeters 4 Upgrades to the ATLAS Liquid-Argon Calorimeters 4.1 Physics Goals 4.2 Phase-I Upgrade 4.3 Phase-II Upgrade 5 Noise Suppression With Digital Filters 5.1 Terminology 5.2 Digital Filters 5.3 Wiener Filter 5.4 Matched Wiener Filter 5.5 Matched Wiener Filter Without Bias 5.6 Timing Reconstruction, Optimal Filtering, and Selection Criteria 5.7 Forward Correction 5.8 Sparse Signal Restoration 5.9 Artificial Neural Networks 6 Simulation of the ATLAS Liquid-Argon Calorimeter Readout Electronics 6.1 AREUS 6.2 Hit Generation and Sampling 6.3 Pulse Shapes 6.4 Thermal Noise 6.5 Quantization 6.6 Digital Filters 6.7 Statistical Analysis 7 Results of the Readout Electronics Simulation Studies 7.1 Statistical Treatment 7.2 Simulation Verification Using Run-2 Data 7.3 Dependence of the Noise on the Shaping Time 7.4 The Analog Readout Electronics and the ADC 7.5 The Optimal Filter (OF) 7.6 The Wiener Filter 7.7 The Wiener Filter with Forward Correction (WFFC) 7.8 Final Comparison and Conclusions 8 Conclusions and Outlook AppendicesThe Large Hadron Collider and the ATLAS detector are undergoing a comprehensive upgrade split into multiple phases. This effort also affects the liquid-argon calorimeters, whose main readout electronics will be replaced completely during the final phase. The electronics consist of an analog and a digital portion: the former amplifies the signal and shapes it to facilitate sampling, the latter executes an energy reconstruction algorithm. Both must be improved during the upgrade so that the detector may accurately reconstruct interesting collision events and efficiently suppress uninteresting ones. In this thesis, simulation studies are presented that optimize both the analog and the digital readout of the liquid-argon calorimeters. The simulation is verified using calibration data that has been measured during Run 2 of the ATLAS detector. The influence of several parameters of the analog shaping stage on the energy resolution is analyzed and the utility of an increased signal sampling rate of 80 MHz is investigated. Furthermore, a number of linear and non-linear energy reconstruction algorithms is reviewed and the performance of a selection of them is compared. It is demonstrated that increasing the order of the Optimal Filter, the algorithm currently in use, improves energy resolution by 2 to 3 % in all detector regions. The Wiener filter with forward correction, a non-linear algorithm, gives an improvement of up to 10 % in some regions, but degrades the resolution in others. A link between this behavior and the probability of falsely detected calorimeter hits is shown and possible solutions are discussed.:1 Introduction 2 An Overview of High-Energy Particle Physics 2.1 The Standard Model of Particle Physics 2.2 Verification of the Standard Model 2.3 Beyond the Standard Model 3 LHC, ATLAS, and the Liquid-Argon Calorimeters 3.1 The Large Hadron Collider 3.2 The ATLAS Detector 3.3 The ATLAS Liquid-Argon Calorimeters 4 Upgrades to the ATLAS Liquid-Argon Calorimeters 4.1 Physics Goals 4.2 Phase-I Upgrade 4.3 Phase-II Upgrade 5 Noise Suppression With Digital Filters 5.1 Terminology 5.2 Digital Filters 5.3 Wiener Filter 5.4 Matched Wiener Filter 5.5 Matched Wiener Filter Without Bias 5.6 Timing Reconstruction, Optimal Filtering, and Selection Criteria 5.7 Forward Correction 5.8 Sparse Signal Restoration 5.9 Artificial Neural Networks 6 Simulation of the ATLAS Liquid-Argon Calorimeter Readout Electronics 6.1 AREUS 6.2 Hit Generation and Sampling 6.3 Pulse Shapes 6.4 Thermal Noise 6.5 Quantization 6.6 Digital Filters 6.7 Statistical Analysis 7 Results of the Readout Electronics Simulation Studies 7.1 Statistical Treatment 7.2 Simulation Verification Using Run-2 Data 7.3 Dependence of the Noise on the Shaping Time 7.4 The Analog Readout Electronics and the ADC 7.5 The Optimal Filter (OF) 7.6 The Wiener Filter 7.7 The Wiener Filter with Forward Correction (WFFC) 7.8 Final Comparison and Conclusions 8 Conclusions and Outlook Appendice