Computational Microwave Imaging Using 3D Printed Conductive Polymer Frequency-Diverse Metasurface Antennas

A frequency-diverse computational imaging system synthesized using three-dimensional (3D) printed frequency-diverse metasurface antennas is demonstrated. The 3D fabrication of the antennas is achieved using a combination of PolyLactic Acid (PLA) polymer material and conductive polymer material (Electrifi), circumventing the requirement for expensive and time-consuming conventional fabrication techniques, such as machine milling, photolithography and laser-etching. Using the 3D printed frequency- diverse metasurface antennas, a composite aperture is designed and simulated for imaging in the K-band frequency regime (17.5-26.5 GHz). The frequency-diverse system is capable of imaging by means of a simple frequency-sweep in an-all electronic manner, avoiding mechanical scanning and active circuit components. Using the synthesized system, microwave imaging of objects is achieved at the diffraction limit. It is also demonstrated that the conductivity of the Electrifi polymer material significantly affects the performance of the 3D printed antennas and therefore is a critical factor governing the fidelity of the reconstructed images.Comment: Original manuscript as submitted to IET Microwaves, Antennas & Propagation (2017). 17 pages, 8 figure

TECHNIQUES AND INSTRUMENTATION FOR PHASED ARRAY CALIBRATION

Active phased arrays suffer the inherent problem of excitation errors, i.e., incorrect phase and amplitude excitation of the antenna elements. Excitation errors degrade critical performance parameters since they increase sidelobe level and reduce antenna gain and beam pointing accuracy. To ensure the correct operation of the array, it is necessary to quantify and compensate the phase and amplitude errors of each antenna element. The compensation is accomplished by calibrating the phased array radar. Calibration challenges include the quantification and compensation of errors initially, as well as maintenance of the calibration state once the system is fielded. This dissertation presents research on improving the calibration of the active phased array front-end for radar systems. A combination of custom-made instrumentation with initial and in-situ calibration techniques is proposed to calibrate an active array test-bed. The test-bed consists of an 8$\times$8 elements C-band array, and was developed in collaboration with NCAR-EOL to provide software and hardware features that enable the proposed calibration schemes. Different calibration techniques were experimentally tested. First, an initial calibration technique for phased array prototypes is proposed. The technique employs a planar NF scanner to sample the excitation of each antenna element, and also to scan the embedded element antenna patterns of the prototype. The novelty of the approach is that it combines the collected excitation data with the scanned embedded elements to allow the prediction of both the co- and cross-polar pattern components of the array. On the other hand, to explore techniques that do not rely on external equipment and use built-in feedback mechanisms instead, mutual coupling-based calibration is reviewed and implemented. Two techniques were tested: an initial type, proposed by Bekers et al., and a proposed in-situ type, conceived specifically for analog architectures, to track errors during fielded operation. It was found that mutual coupling calibration techniques are excellent options for in-situ applications, with a root mean squared error (RMSE) in phase and amplitude of 0.75$^\circ$ and 0.12 dB, respectively. Whereas, for initial type calibration, the tested mutual coupling-based technique yields a RMSE of 2.5$^\circ$ and $\geq$ 1 dB, respectively, which is not accurate enough to replace conventional park and probe for initial calibration of small arrays. Finally, to complement calibration theory, the required calibration instrumentation is reviewed, and more importantly, a novel scanner, designed exclusively for phased array front-end characterization, is introduced

Applications of Antenna Technology in Sensors

During the past few decades, information technologies have been evolving at a tremendous rate, causing profound changes to our world and to our ways of living. Emerging applications have opened u[ new routes and set new trends for antenna sensors. With the advent of the Internet of Things (IoT), the adaptation of antenna technologies for sensor and sensing applications has become more important. Now, the antennas must be reconfigurable, flexible, low profile, and low-cost, for applications from airborne and vehicles, to machine-to-machine, IoT, 5G, etc. This reprint aims to introduce and treat a series of advanced and emerging topics in the field of antenna sensors

1-D broadside-radiating leaky-wave antenna based on a numerically synthesized impedance surface

A newly-developed deterministic numerical technique for the automated design of metasurface antennas is applied here for the first time to the design of a 1-D printed Leaky-Wave Antenna (LWA) for broadside radiation. The surface impedance synthesis process does not require any a priori knowledge on the impedance pattern, and starts from a mask constraint on the desired far-field and practical bounds on the unit cell impedance values. The designed reactance surface for broadside radiation exhibits a non conventional patterning; this highlights the merit of using an automated design process for a design well known to be challenging for analytical methods. The antenna is physically implemented with an array of metal strips with varying gap widths and simulation results show very good agreement with the predicted performance

Beam scanning by liquid-crystal biasing in a modified SIW structure

A fixed-frequency beam-scanning 1D antenna based on Liquid Crystals (LCs) is designed for application in 2D scanning with lateral alignment. The 2D array environment imposes full decoupling of adjacent 1D antennas, which often conflicts with the LC requirement of DC biasing: the proposed design accommodates both. The LC medium is placed inside a Substrate Integrated Waveguide (SIW) modified to work as a Groove Gap Waveguide, with radiating slots etched on the upper broad wall, that radiates as a Leaky-Wave Antenna (LWA). This allows effective application of the DC bias voltage needed for tuning the LCs. At the same time, the RF field remains laterally confined, enabling the possibility to lay several antennas in parallel and achieve 2D beam scanning. The design is validated by simulation employing the actual properties of a commercial LC medium

Design of Radio-Frequency Arrays for Ultra-High Field MRI

Magnetic Resonance Imaging (MRI) is an indispensable, non-invasive diagnostic tool for the assessment of disease and function. As an investigational device, MRI has found routine use in both basic science research and medicine for both human and non-human subjects. Due to the potential increase in spatial resolution, signal-to-noise ratio (SNR), and the ability to exploit novel tissue contrasts, the main magnetic field strength of human MRI scanners has steadily increased since inception. Beginning in the early 1980’s, 0.15 T human MRI scanners have steadily risen in main magnetic field strength with ultra-high field (UHF) 8 T MRI systems deemed to be insignificant risk by the FDA (as of 2016). However, at UHF the electromagnetic fields describing the collective behaviour of spin dynamics in human tissue assume ‘wave-like’ behaviour due to an increase in the processional frequency of nuclei at UHF. At these frequencies, the electromagnetic interactions transition from purely near-field interactions to a mixture of near- and far-field mechanisms. Due to this, the transmission field at UHF can produce areas of localized power deposition – leading to tissue heating – as well as tissue-independent contrast in the reconstructed images. Correcting for these difficulties is typically achieved via multi-channel radio-frequency (RF) arrays. This technology allows multiple transmitting elements to synthesize a more uniform field that can selectively minimize areas of local power deposition and remove transmission field weighting from the final reconstructed image. This thesis provides several advancements in the design and construction of these arrays. First, in Chapter 2 a general framework for modeling the electromagnetic interactions occurring inside an RF array is adopted from multiply-coupled waveguide filters and applied to a subset of decoupling problems encountered when constructing RF arrays. It is demonstrated that using classic filter synthesis, RF arrays of arbitrary size and geometry can be decoupled via coupling matrix synthesis. Secondly, in Chapters 3 and 4 this framework is extended for designing distributed filters for simple decoupling of RF arrays and removing the iterative tuning portion of utilizing decoupling circuits when constructing RF arrays. Lastly, in Chapter 5 the coupling matrix synthesis framework is applied to the construction of a conformal transmit/receive RF array that is shape optimized to minimize power deposition in the human head during any routine MRI examination

NASA Office of Aeronautics and Space Technology Summer Workshop. Volume 2: Sensing and data acquisitions panel

Advanced technology requirements associated with sensing and data acquisition systems were assessed for future space missions. Sensing and data acquisition system payloads which would benefit from the use of the space shuttle in demonstrating technology readiness are identified. Topics covered include: atmospheric sensing payloads, earth resources sensing payloads, microwave systems sensing payloads, technology development/evaluation payloads, and astronomy/planetary payloads

Trade-off analysis of modes of data handling for earth resources (ERS), volume 2

For abstract, see N75-26470