Developing large-scale field-programmable analog arrays for rapid prototyping

Field-programmable analog arrays (FPAAs) provide a method for rapidly prototyping analog systems. While currently available FPAAs vary in architecture and interconnect design, they are often limited in size and flexibility. For FPAAs to be as useful and marketable as modern digital reconfigurable devices, new technologies must be explored to provide area efficient, accurately programmable analog circuitry that can be easily integrated into a larger digital/mixed signal system. By leveraging recent advances in floating gate transistors, a new generation of FPAAs are achievable that will dramatically advance the current state of the art in terms of size, functionality, and flexibility

Investigation into the wafer-scale integration of fine-grain parallel processing computer systems

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.This thesis investigates the potential of wafer-scale integration (WSI) for the implementation of low-cost fine-grain parallel processing computer systems. As WSI is a relatively new subject, there was little work on which to base investigations. Indeed, most WSI architectures existed only as untried and sometimes vague proposals. Accordingly, the research strategy approached this problem by identifying a representative WSI structure and architecture on which to base investigations. An analysis of architectural proposals identified associative memory to be general purpose parallel processing component used in a wide range of WSI architectures. Furthermore, this analysis provided a set of WSI-level design requirements to evaluate the sustainability of different architectures as research vehicles. The WSI-ASP (WASP) device, which has a large associative memory as its main component is shown to meet these requirements and hence was chosen as the research vehicle. Consequently, this thesis addresses WSI potential through an in-depth investigation into the feasibility of implementing a large associative memory for the WASP device that meets the demanding technological constraints of WSI. Overall, the thesis concludes that WSI offers significant potential for the implementation of low-cost fine-grain parallel processing computer systems. However, due to the dual constraints of thermal management and the area required for the power distribution network, power density is a major design constraint in WSI. Indeed, it is shown that WSI power densities need to be an order of magnitude lower than VLSI power densities. The thesis demonstrates that for associative memories at least, VLSI designs are unsuited to implementation in WSI. Rather, it is shown that WSI circuits must be closely matched to the operational environment to assure suitable power densities. These circuits are significantly larger than their VLSI equivalents. Nonetheless, the thesis demonstrates that by concentrating on the most power intensive circuits, it is possible to achieve acceptable power densities with only a modest increase in area overheads.SER

H-SIMD machine : configurable parallel computing for data-intensive applications

This dissertation presents a hierarchical single-instruction multiple-data (H-SLMD) configurable computing architecture to facilitate the efficient execution of data-intensive applications on field-programmable gate arrays (FPGAs). H-SIMD targets data-intensive applications for FPGA-based system designs. The H-SIMD machine is associated with a hierarchical instruction set architecture (HISA) which is developed for each application. The main objectives of this work are to facilitate ease of program development and high performance through ease of scheduling operations and overlapping communications with computations. The H-SIMD machine is composed of the host, FPGA and nano-processor layers. They execute host SIMD instructions (HSIs), FPGA SIMD instructions (FSIs) and nano-processor instructions (NPLs), respectively. A distinction between communication and computation instructions is intended for all the HISA layers. The H-SIMD machine also employs a memory switching scheme to bridge the omnipresent large bandwidth gaps in configurable systems. To showcase the proposed high-performance approach, the conditions to fully overlap communications with computations are investigated for important applications. The building blocks in the H-SLMD machine, such as high-performance and area-efficient register files, are presented in detail. The H-SLMD machine hierarchy is implemented on a host Dell workstation and the Annapolis Wildstar II FPGA board. Significant speedups have been achieved for matrix multiplication (MM), 2-dimensional discrete cosine transform (2D DCT) and 2-dimensional fast Fourier transform (2D FFT) which are used widely in science and engineering. In another FPGA-based programming paradigm, a high-level language (here ANSI C) can be used to program the FPGAs in a mode similar to that of the H-SIMD machine in terms of trying to minimize the effect of overheads. More specifically, a multi-threaded overlapping scheme is proposed to reduce as much as possible, or even completely hide, runtime FPGA reconfiguration overheads. Nevertheless, although the HLL-enabled reconfigurable machine allows software developers to customize FPGA functions easily, special architecture techniques are needed to achieve high-performance without significant penalty on area and clock frequency. Two important high-performance applications, matrix multiplication and image edge detection, are tested on the SRC-6 reconfigurable machine. The implemented algorithms are able to exploit the available data parallelism with independent functional units and application-specific cache support. Relevant performance and design tradeoffs are analyzed

Extensible sparse functional arrays with circuit parallelism

A longstanding open question in algorithms and data structures is the time and space complexity of pure functional arrays. Imperative arrays provide update and lookup operations that require constant time in the RAM theoretical model, but it is conjectured that there does not exist a RAM algorithm that achieves the same complexity for functional arrays, unless restrictions are placed on the operations. The main result of this paper is an algorithm that does achieve optimal unit time and space complexity for update and lookup on functional arrays. This algorithm does not run on a RAM, but instead it exploits the massive parallelism inherent in digital circuits. The algorithm also provides unit time operations that support storage management, as well as sparse and extensible arrays. The main idea behind the algorithm is to replace a RAM memory by a tree circuit that is more powerful than the RAM yet has the same asymptotic complexity in time (gate delays) and size (number of components). The algorithm uses an array representation that allows elements to be shared between many arrays with only a small constant factor penalty in space and time. This system exemplifies circuit parallelism, which exploits very large numbers of transistors per chip in order to speed up key algorithms. Extensible Sparse Functional Arrays (ESFA) can be used with both functional and imperative programming languages. The system comprises a set of algorithms and a circuit specification, and it has been implemented on a GPGPU with good performance

Coarse-grained reconfigurable array architectures

Coarse-Grained Reconfigurable Array (CGRA) architectures accelerate the same inner loops that benefit from the high ILP support in VLIW architectures. By executing non-loop code on other cores, however, CGRAs can focus on such loops to execute them more efficiently. This chapter discusses the basic principles of CGRAs, and the wide range of design options available to a CGRA designer, covering a large number of existing CGRA designs. The impact of different options on flexibility, performance, and power-efficiency is discussed, as well as the need for compiler support. The ADRES CGRA design template is studied in more detail as a use case to illustrate the need for design space exploration, for compiler support and for the manual fine-tuning of source code

Low Power Processor Architectures and Contemporary Techniques for Power Optimization – A Review

The technological evolution has increased the number of transistors for a given die area significantly and increased the switching speed from few MHz to GHz range. Such inversely proportional decline in size and boost in performance consequently demands shrinking of supply voltage and effective power dissipation in chips with millions of transistors. This has triggered substantial amount of research in power reduction techniques into almost every aspect of the chip and particularly the processor cores contained in the chip. This paper presents an overview of techniques for achieving the power efficiency mainly at the processor core level but also visits related domains such as buses and memories. There are various processor parameters and features such as supply voltage, clock frequency, cache and pipelining which can be optimized to reduce the power consumption of the processor. This paper discusses various ways in which these parameters can be optimized. Also, emerging power efficient processor architectures are overviewed and research activities are discussed which should help reader identify how these factors in a processor contribute to power consumption. Some of these concepts have been already established whereas others are still active research areas. © 2009 ACADEMY PUBLISHER