XDIVINSA: eXtended DIVersifying INStruction Agent to Mitigate Power Side-Channel Leakage

Side-channel analysis (SCA) attacks pose a major threat to embedded systems due to their ease of accessibility. Realising SCA resilient cryptographic algorithms on embedded systems under tight intrinsic constraints, such as low area cost, limited computational ability, etc., is extremely challenging and often not possible. We propose a seamless and effective approach to realise a generic countermeasure against SCA attacks. XDIVINSA, an extended diversifying instruction agent, is introduced to realise the countermeasure at the microarchitecture level based on the combining concept of diversified instruction set extension (ISE) and hardware diversification. XDIVINSA is developed as a lightweight co-processor that is tightly coupled with a RISC-V processor. The proposed method can be applied to various algorithms without the need for software developers to undertake substantial design efforts hardening their implementations against SCA. XDIVINSA has been implemented on the SASEBO G-III board which hosts a Kintex-7 XC7K160T FPGA device for SCA mitigation evaluation. Experimental results based on non-specific t-statistic tests show that our solution can achieve leakage mitigation on the power side channel of different cryptographic kernels, i.e., Speck, ChaCha20, AES, and RSA with an acceptable performance overhead compared to existing countermeasures.This work has been supported in part by EPSRC via grant EP/R012288/1, under the RISE (http://www.ukrise.org) programme.Peer ReviewedPostprint (author's final draft

A new countermeasure against side-channel attacks based on hardware-software co-design

This paper aims at presenting a new countermeasure against Side-Channel Analysis (SCA) attacks, whose implementation is based on a hardware-software co-design. The hardware architecture consists of a microprocessor, which executes the algorithm using a false key, and a coprocessor that performs several operations that are necessary to retrieve the original text that was encrypted with the real key. The coprocessor hardly affects the power consumption of the device, so that any classical attack based on such power consumption would reveal a false key. Additionally, as the operations carried out by the coprocessor are performed in parallel with the microprocessor, the execution time devoted for encrypting a specific text is not affected by the proposed countermeasure. In order to verify the correctness of our proposal, the system was implemented on a Virtex 5 FPGA. Different SCA attacks were performed on several functions of AES algorithm. Experimental results show in all cases that the system is effectively protected by revealing a false encryption key.Peer ReviewedPreprin

RSA Power Analysis Obfuscation: A Dynamic FPGA Architecture

The modular exponentiation operation used in popular public key encryption schemes, such as RSA, has been the focus of many side channel analysis (SCA) attacks in recent years. Current SCA attack countermeasures are largely static. Given sufficient signal-to-noise ratio and a number of power traces, static countermeasures can be defeated, as they merely attempt to hide the power consumption of the system under attack. This research develops a dynamic countermeasure which constantly varies the timing and power consumption of each operation, making correlation between traces more difficult than for static countermeasures. By randomizing the radix of encoding for Booth multiplication and randomizing the window size in exponentiation, this research produces a SCA countermeasure capable of increasing RSA SCA attack protection

Explointing FPGA block memories for protected cryptographic implementations

Modern Field Programmable Gate Arrays (FPGAs) are power packed with features to facilitate designers. Availability of features like huge block memory (BRAM), Digital Signal Processing (DSP) cores, embedded CPU makes the design strategy of FPGAs quite different from ASICs. FPGA are also widely used in security-critical application where protection against known attacks is of prime importance. We focus ourselves on physical attacks which target physical implementations. To design countermeasures against such attacks, the strategy for FPGA designers should also be different from that in ASIC. The available features should be exploited to design compact and strong countermeasures. In this paper, we propose methods to exploit the BRAMs in FPGAs for designing compact countermeasures. BRAM can be used to optimize intrinsic countermeasures like masking and dual-rail logic, which otherwise have significant overhead (at least 2X). The optimizations are applied on a real AES-128 co-processor and tested for area overhead and resistance on Xilinx Virtex-5 chips. The presented masking countermeasure has an overhead of only 16% when applied on AES. Moreover Dual-rail Precharge Logic (DPL) countermeasure has been optimized to pack the whole sequential part in the BRAM, hence enhancing the security. Proper robustness evaluations are conducted to analyze the optimization for area and security

Circuit-Variant Moving Target Defense for Side-Channel Attacks on Reconfigurable Hardware

With the emergence of side-channel analysis (SCA) attacks, bits of a secret key may be derived by correlating key values with physical properties of cryptographic process execution. Power and Electromagnetic (EM) analysis attacks are based on the principle that current flow within a cryptographic device is key-dependent and therefore, the resulting power consumption and EM emanations during encryption and/or decryption can be correlated to secret key values. These side-channel attacks require several measurements of the target process in order to amplify the signal of interest, filter out noise, and derive the secret key through statistical analysis methods. Differential power and EM analysis attacks rely on correlating actual side-channel measurements to hypothetical models. This research proposes increasing resistance to differential power and EM analysis attacks through structural and spatial randomization of an implementation. By introducing randomly located circuit variants of encryption components, the proposed moving target defense aims to disrupt side-channel collection and correlation needed to successfully implement an attac

Systematic Literature Review of EM-SCA Attacks on Encryption

Cryptography is vital for data security, but cryptographic algorithms can still be vulnerable to side-channel attacks (SCAs), physical assaults exploiting power consumption and EM radiation. SCAs pose a significant threat to cryptographic integrity, compromising device keys. While literature on SCAs focuses on real-world devices, the rise of sophisticated devices necessitates fresh approaches. Electromagnetic side-channel analysis (EM-SCA) gathers information by monitoring EM radiation, capable of retrieving encryption keys and detecting malicious activity. This study evaluates EM-SCA's impact on encryption across scenarios and explores its role in digital forensics and law enforcement. Addressing encryption susceptibility to EM-SCA can empower forensic investigators in overcoming encryption challenges, maintaining their crucial role in law enforcement. Additionally, the paper defines EM-SCA's current state in attacking encryption, highlighting vulnerable and resistant encryption algorithms and devices, and promising EM-SCA approaches. This study offers a comprehensive analysis of EM-SCA in law enforcement and digital forensics, suggesting avenues for further research

Asynchronous Advanced Encryption Standard Hardware with Random Noise Injection for Improved Side-Channel Attack Resistance

This work presents the design, hardware implementation, and performance analysis of novel asynchronous AES (advanced encryption standard) Key Expander and Round Function, which offer increased side-channel attack (SCA) resistance. These designs are based on a delay-insensitive (DI) logic paradigm known as null convention logic (NCL), which supports useful properties for resisting SCAs including dual-rail encoding, clock-free operation, and monotonic transitions. Potential benefits include reduced and more uniform switching activities and reduced signal-to-noise (SNR) ratio. A novel method to further augment NCL AES hardware with random voltage scaling technique is also presented for additional security. Thereby, the proposed components leak significantly less side-channel information than conventional clocked approaches. To quantitatively verify such improvements, functional verification and WASSO (weighted average simultaneous switching output) analysis have been carried out on both conventional synchronous approach and the proposed NCL based approach using Mentor Graphics ModelSim and Xilinx simulation tools. Hardware implementation has been carried out on both designs exploiting a specified side-channel attack standard evaluation FPGA board, called SASEBO-GII, and the corresponding power waveforms for both designs have been collected. Along with the results of software simulations, we have analyzed the collected waveforms to validate the claims related to benefits of the proposed cryptohardware design approach