221 research outputs found
System capacity enhancement for 5G network and beyond
A thesis submitted to the University of Bedfordshire, in fulfilment of the requirements for the degree of Doctor of PhilosophyThe demand for wireless digital data is dramatically increasing year over year. Wireless communication systems like Laptops, Smart phones, Tablets, Smart watch, Virtual Reality devices and so on are becoming an important part of people’s daily life. The number of mobile devices is increasing at a very fast speed as well as the requirements for mobile devices such as super high-resolution image/video, fast download speed, very short latency and high reliability, which raise challenges to the existing wireless communication networks. Unlike the previous four generation communication networks, the fifth-generation (5G) wireless communication network includes many technologies such as millimetre-wave communication, massive multiple-input multiple-output (MIMO), visual light communication (VLC), heterogeneous network (HetNet) and so forth. Although 5G has not been standardised yet, these above technologies have been studied in both academia and industry and the goal of the research is to enhance and improve the system capacity for 5G networks and beyond by studying some key problems and providing some effective solutions existing in the above technologies from system implementation and hardware impairments’ perspective.
The key problems studied in this thesis include interference cancellation in HetNet, impairments calibration for massive MIMO, channel state estimation for VLC, and low latency parallel Turbo decoding technique. Firstly, inter-cell interference in HetNet is studied and a cell specific reference signal (CRS) interference cancellation method is proposed to mitigate the performance degrade in enhanced inter-cell interference coordination (eICIC). This method takes carrier frequency offset (CFO) and timing offset (TO) of the user’s received signal into account. By reconstructing the interfering signal and cancelling it afterwards, the capacity of HetNet is enhanced.
Secondly, for massive MIMO systems, the radio frequency (RF) impairments of the hardware will degrade the beamforming performance. When operated in time duplex division (TDD) mode, a massive MIMO system relies on the reciprocity of the channel which can be broken by the transmitter and receiver RF impairments. Impairments calibration has been studied and a closed-loop reciprocity calibration method is proposed in this thesis. A test device (TD) is introduced in this calibration method that can estimate the transmitters’ impairments over-the-air and feed the results back to the base station via the Internet. The uplink pilots sent by the TD can assist the BS receivers’ impairment estimation. With both the uplink and downlink impairments estimates, the reciprocity calibration coefficients can be obtained. By computer simulation and lab experiment, the performance of the proposed method is evaluated.
Channel coding is an essential part of a wireless communication system which helps fight with noise and get correct information delivery. Turbo codes is one of the most reliable codes that has been used in many standards such as WiMAX and LTE. However, the decoding process of turbo codes is time-consuming and the decoding latency should be improved to meet the requirement of the future network. A reverse interleave address generator is proposed that can reduce the decoding time and a low latency parallel turbo decoder has been implemented on a FPGA platform. The simulation and experiment results prove the effectiveness of the address generator and show that there is a trade-off between latency and throughput with a limited hardware resource.
Apart from the above contributions, this thesis also investigated multi-user precoding for MIMO VLC systems. As a green and secure technology, VLC is achieving more and more attention and could become a part of 5G network especially for indoor communication. For indoor scenario, the MIMO VLC channel could be easily ill-conditioned. Hence, it is important to study the impact of the channel state to the precoding performance. A channel state estimation method is proposed based on the signal to interference noise ratio (SINR) of the users’ received signal. Simulation results show that it can enhance the capacity of the indoor MIMO VLC system
Multi-Antenna Techniques for Next Generation Cellular Communications
Future cellular communications are expected to offer substantial improvements for the pre- existing mobile services with higher data rates and lower latency as well as pioneer new types of applications that must comply with strict demands from a wider range of user types. All of these tasks require utmost efficiency in the use of spectral resources. Deploying multiple antennas introduces an additional signal dimension to wireless data transmissions, which provides a significant alternative solution against the plateauing capacity issue of the limited available spectrum. Multi-antenna techniques and the associated key enabling technologies possess unquestionable potential to play a key role in the evolution of next generation cellular systems.
Spectral efficiency can be improved on downlink by concurrently serving multiple users with high-rate data connections on shared resources. In this thesis optimized multi-user multi-input multi-output (MIMO) transmissions are investigated on downlink from both filter design and resource allocation/assignment points of view. Regarding filter design, a joint baseband processing method is proposed specifically for high signal-to-noise ratio (SNR) conditions, where the necessary signaling overhead can be compensated for. Regarding resource scheduling, greedy- and genetic-based algorithms are proposed that demand lower complexity with large number of resource blocks relative to prior implementations.
Channel estimation techniques are investigated for massive MIMO technology. In case of channel reciprocity, this thesis proposes an overhead reduction scheme for the signaling of user channel state information (CSI) feedback during a relative antenna calibration. In addition, a multi-cell coordination method is proposed for subspace-based blind estimators on uplink, which can be implicitly translated to downlink CSI in the presence of ideal reciprocity. Regarding non-reciprocal channels, a novel estimation technique is proposed based on reconstructing full downlink CSI from a select number of dominant propagation paths. The proposed method offers drastic compressions in user feedback reports and requires much simpler downlink training processes.
Full-duplex technology can provide up to twice the spectral efficiency of conventional resource divisions. This thesis considers a full-duplex two-hop link with a MIMO relay and investigates mitigation techniques against the inherent loop-interference. Spatial-domain suppression schemes are developed for the optimization of full-duplex MIMO relaying in a coverage extension scenario on downlink. The proposed methods are demonstrated to generate data rates that closely approximate their global bounds
Multi-user MIMO wireless communications
Mehrantennensysteme sind auf Grund der erhöhten Bandbreiteneffizienz und
Leistung eine SchlĂĽsselkomponente von Mobilfunksystemen der Zukunft. Diese
ermöglichen das gleichzeitige Senden von mehreren, räumlich getrennten
Datenströmen zu verschiedenen Nutzern. Die zentrale Fragestellung in der Praxis
ist, ob der ursprünglich vorausgesagte Kapazitätsgewinn in realistischen
Szenarios erreicht wird und welche spezifischen Gewinne durch zusätzliche
Antennen und das Ausnutzen von Kanalkenntnis am Sender und Empfänger erzielt
werden, was andererseits einen Zuwachs an Overhead oder nötiger Rechenleistung
bedeutet.
In dieser Arbeit werden neue lineare und nicht-lineare MU-MIMO Precoding-
Verfahren vorgestellt. Der verfolgte Ansatz zur Bestimmung der Precoding-
Matrizen ist allgemein anwendbar und die entstandenen Algorithmen können zur
Optimierung von verschiedenen Kriterien mit beliebig vielen Antennen an der
Mobilstation eingesetzt werden. Das wurde durch die Berechnung der Precoding-
Matrix in zwei Schritten erreicht. Im ersten Schritt wird die Ăśberschneidung der
Zeilenräume minimiert, die durch die effektiven Kanalmatrizen verschiedener
Nutzer aufgespannt werden. Basierend auf mehreren parallelen Einzelnutzer-MIMO-
Kanälen wird im zweiten Schritt die Systemperformanz bezüglich bestimmter
Kriterien optimiert.
Aus der gängigen Literatur ist bereits bekannt, dass für Nutzer mit nur einer
Antenne das MMSE Kriterium beim precoding optimal aber nicht bei Nutzern mit
mehreren Antennen. Deshalb werden in dieser Arbeit zwei neue Mehrnutzer MIMO
Strategien vorgestellt, die vom MSE Kriterium abgeleitet sind, nämlich
sukzessives MMSE und RBD. Bei der sukzessiven Verarbeitung mit einer
entsprechenden Anpassung der Sendeleistungsverteilung kann die volle Diversität
des Systems ausgeschöpft werden. Die Kapazität nähert sich dabei der maximalen
Summenrate des Systems an. Bei gemeinsamer Verarbeitung der MIMO Kanäle wird
unabhängig vom Grad der Mehrnutzerinterferenz die maximale Diversität erreicht.
Die genannten Techniken setzen entweder eine aktuelle oder eine ĂĽber einen
längeren Zeitraum gemittelte Kanalkenntnis voraus. Aus diesem Grund müssen die
Auswirkungen von Kanal-Schätzfehlern und Einflüsse des Transceiver Front-Ends
auf die Verfahren näher untersucht werden.
Für eine weitergehende Abschätzung der Mehrantennensysteme muss die Performanz
des Gesamtsystems untersucht werden, da viele Einflüsse auf die räumliche
Signalverarbeitung bei Betrachtung eines einzelnen Links nicht erkennbar sind.
Es wurde gezeigt, dass mit MIMO Precoding Strategien ein Vielfaches der
Datenrate eines Systems mit nur einer Antenne erzielt werden kann, während der
Overhead durch Pilotsymbole und Steuersignale nur geringfĂĽgig zunimmt.Multiple-input, multiple-output (MIMO) systems are a key component of future
wireless communication systems, because of their promising improvement in terms
of performance and bandwidth efficiency. An important research topic is the
study of multi-user (MU) MIMO systems. Such systems have the potential to
combine the high throughput achievable with MIMO processing with the benefits of
space division multiple access (SDMA). The main question from a practical
standpoint is whether the initially predicted capacity gains can be obtained in
more realistic scenarios and what specific gains result from adding more
antennas and overhead or computational power to obtain channel state information
(CSI) at the transceivers.
In this thesis we introduce new linear and non-linear MU MIMO processing
techniques. The approach used for the design of the precoding matrix is general
and the resulting algorithms can address several optimization criteria with an
arbitrary number of antennas at the user terminals (UTs). This is achieved by
designing the precoding matrices in two steps. In the first step we minimize the
overlap of the row spaces spanned by the effective channel matrices of different
users. In the next step, we optimize the system performance with respect to the
specific optimization criterion assuming a set of parallel single-user MIMO
channels.
As it was previously reported in the literature, minimum mean-squared-error
(MMSE) processing is optimum for single-antenna UTs. However, MMSE suffers from
a performance loss when users are equipped with more than one antenna. The two
MU MIMO processing techniques that result from the two different MSE criteria
that are proposed in this thesis are successive MMSE and regularized block
diagonalization. By iterating the closed form solution with appropriate power
loading we are able to extract the full diversity in the system and empirically
approach the maximum sum-rate capacity in case of high multi-user interference.
Joint processing of MIMO channels yields maximum diversity regardless of the
level of multi-user interference.
As these techniques rely on the fact that there is either instantaneous or long-
term CSI available at the base station to perform precoding and decoding, it was
very important to investigate the influence of the transceiver front-end
imperfections and channel estimation errors on their performance.
For a comprehensive assessment of multi-antenna techniques, it is mandatory to
consider the performance at system level, since many effects of spatial
processing are not tractable at the link level. System level investigations have
shown that MU MIMO precoding techniques provide several times higher data rates
than single-input single-output systems with only slightly increased pilot and
control overhead
Full-duplex wireless communications: challenges, solutions and future research directions
The family of conventional half-duplex (HD) wireless systems relied on transmitting and receiving in different time-slots or frequency sub-bands. Hence the wireless research community aspires to conceive full-duplex (FD) operation for supporting concurrent transmission and reception in a single time/frequency channel, which would improve the attainable spectral efficiency by a factor of two. The main challenge encountered in implementing an FD wireless device is the large power difference between the self-interference (SI) imposed by the device’s own transmissions and the signal of interest received from a remote source. In this survey, we present a comprehensive list of the potential FD techniques and highlight their pros and cons. We classify the SI cancellation techniques into three categories, namely passive suppression, analog cancellation and digital cancellation, with the advantages and disadvantages of each technique compared. Specifically, we analyse the main impairments (e.g. phase noise, power amplifier nonlinearity as well as in-phase and quadrature-phase (I/Q) imbalance, etc.) that degrading the SI cancellation. We then discuss the FD based Media Access Control (MAC)-layer protocol design for the sake of addressing some of the critical issues, such as the problem of hidden terminals, the resultant end-to-end delay and the high packet loss ratio (PLR) due to network congestion. After elaborating on a variety of physical/MAC-layer techniques, we discuss potential solutions conceived for meeting the challenges imposed by the aforementioned techniques. Furthermore, we also discuss a range of critical issues related to the implementation, performance enhancement and optimization of FD systems, including important topics such as hybrid FD/HD scheme, optimal relay selection and optimal power allocation, etc. Finally, a variety of new directions and open problems associated with FD technology are pointed out. Our hope is that this treatise will stimulate future research efforts in the emerging field of FD communication
Recommended from our members
Space-time-frequency methods for interference-limited communication systems
textTraditionally, noise in communication systems has been modeled as an additive, white Gaussian noise process with independent, identically distributed samples. Although this model accurately reflects thermal noise present in communication system electronics, it fails to capture the statistics of interference and other sources of noise, e.g. in unlicensed communication bands. Modern communication system designers must take into account interference and non-Gaussian noise to maximize efficiencies and capacities of current and future communication networks. In this work, I develop new multi-dimensional signal processing methods to improve performance of communication systems in three applications areas: (i) underwater acoustic, (ii) powerline, and (iii) multi-antenna cellular. In underwater acoustic communications, I address impairments caused by strong, time-varying and Doppler-spread reverberations (self-interference) using adaptive space-time signal processing methods. I apply these methods to array receivers with a large number of elements. In powerline communications, I address impairments caused by non-Gaussian noise arising from devices sharing the powerline. I develop and apply a cyclic adaptive modulation and coding scheme and a factor-graph-based impulsive noise mitigation method to improve signal quality and boost link throughput and robustness. In cellular communications, I develop a low-latency, high-throughput space-time-frequency processing framework used for large scale (up to 128 antenna) MIMO. This framework is used in the world's first 100-antenna MIMO system and processes up to 492 Gbps raw baseband samples in the uplink and downlink directions. My methods prove that multi-dimensional processing methods can be applied to increase communication system performance without sacrificing real-time requirements.Electrical and Computer Engineerin
- …