Wireless Communication in Data Centers: A Survey

Data centers (DCs) is becoming increasingly an integral part of the computing infrastructures of most enterprises. Therefore, the concept of DC networks (DCNs) is receiving an increased attention in the network research community. Most DCNs deployed today can be classified as wired DCNs as copper and optical fiber cables are used for intra- and inter-rack connections in the network. Despite recent advances, wired DCNs face two inevitable problems; cabling complexity and hotspots. To address these problems, recent research works suggest the incorporation of wireless communication technology into DCNs. Wireless links can be used to either augment conventional wired DCNs, or to realize a pure wireless DCN. As the design spectrum of DCs broadens, so does the need for a clear classification to differentiate various design options. In this paper, we analyze the free space optical (FSO) communication and the 60 GHz radio frequency (RF), the two key candidate technologies for implementing wireless links in DCNs. We present a generic classification scheme that can be used to classify current and future DCNs based on the communication technology used in the network. The proposed classification is then used to review and summarize major research in this area. We also discuss open questions and future research directions in the area of wireless DCs

Performance evaluation of an optical transparent access tier based on PON and spectral codes

The increasing amount of bandwidth requirements and quality of service needs for the next-generation access networks has boosted extensive research in the fiber-optics communication field. In this light, passive optical networks (PONs) combined with optical code division multiple access (OCDMA), provide a potentially cost-effective solution to meet such bandwidth demands. This work proposes an optical transparent architecture which enables all-optical communication between the network nodes. The encoded data streams are multiplexed at a merging point which results in multiple user interference (MUI), thus significantly reducing the network throughput. The networking nodes are able to monitor and record user activity in the PON, and further register the (past) state of activity at the merging point. In this work, we study the coherence of state between the networking nodes and the merging point, for different packet size distributions, in order to predict an optimal transmission instant of each node's data packets. We note that the states are coherent depending on the packet size distribution

Non-Intrusive Measurement in Packet Networks and its Applications

PhDNetwork measurementis becoming increasingly important as a meanst o assesst he performanceo f packet networks. Network performance can involve different aspects such as availability, link failure detection etc, but in this thesis, we will focus on Quality of Service (QoS). Among the metrics used to define QoS, we are particularly interested in end-to-end delay performance. Recently, the adoption of Service Level Agreements (SLA) between network operators and their customersh as becomea major driving force behind QoS measurementm: easurementi s necessaryt o produce evidence of fulfilment of the requirements specified in the SLA. Many attempts to do QoS based packet level measurement have been based on Active Measurement, in which the properties of the end-to-end path are tested by adding testing packets generated from the sending end. The main drawback of active probing is its intrusive nature which causes extraburden on the network, and has been shown to distort the measured condition of the network. The other category of network measurement is known as Passive Measurement. In contrast to Active Measurement, there are no testing packets injected into the network, therefore no intrusion is caused. The proposed applications using Passive Measurement are currently quite limited. But Passive Measurement may offer the potential for an entirely different perspective compared with Active Measurements In this thesis, the objective is to develop a measurement methodology for the end-to-end delay performance based on Passive Measurement. We assume that the nodes in a network domain are accessible.F or example, a network domain operatedb y a single network operator. The novel idea is to estimate the local per-hop delay distribution based on a hybrid approach (model and measurement-based)W. ith this approach,t he storagem easurementd ata requirement can be greatly alleviated and the overhead put in each local node can be minimized, so maintaining the fast switching operation in a local switcher or router. Per-hop delay distributions have been widely used to infer QoS at a single local node. However, the end-to-end delay distribution is more appropriate when quantifying delays across an end-to-end path. Our approach is to capture every local node's delay distribution, and then the end-to-end delay distribution can be obtained by convolving the estimated delay distributions. In this thesis, our algorithm is examined by comparing the proximity of the actual end-to-end delay distribution with the estimated one obtained by our measurement method under various conditions. e. g. in the presence of Markovian or Power-law traffic. Furthermore, the comparison between Active Measurement and our scheme is also studied. 2 Network operators may find our scheme useful when measuring the end-to-end delay performance. As stated earlier, our scheme has no intrusive effect. Furthermore, the measurement result in the local node can be re-usable to deduce other paths' end-to-end delay behaviour as long as this local node is included in the path. Thus our scheme is more scalable compared with active probing

Optical Wireless Data Center Networks

Bandwidth and computation-intensive Big Data applications in disciplines like social media, bio- and nano-informatics, Internet-of-Things (IoT), and real-time analytics, are pushing existing access and core (backbone) networks as well as Data Center Networks (DCNs) to their limits. Next generation DCNs must support continuously increasing network traffic while satisfying minimum performance requirements of latency, reliability, flexibility and scalability. Therefore, a larger number of cables (i.e., copper-cables and fiber optics) may be required in conventional wired DCNs. In addition to limiting the possible topologies, large number of cables may result into design and development problems related to wire ducting and maintenance, heat dissipation, and power consumption. To address the cabling complexity in wired DCNs, we propose OWCells, a class of optical wireless cellular data center network architectures in which fixed line of sight (LOS) optical wireless communication (OWC) links are used to connect the racks arranged in regular polygonal topologies. We present the OWCell DCN architecture, develop its theoretical underpinnings, and investigate routing protocols and OWC transceiver design. To realize a fully wireless DCN, servers in racks must also be connected using OWC links. There is, however, a difficulty of connecting multiple adjacent network components, such as servers in a rack, using point-to-point LOS links. To overcome this problem, we propose and validate the feasibility of an FSO-Bus to connect multiple adjacent network components using NLOS point-to-point OWC links. Finally, to complete the design of the OWC transceiver, we develop a new class of strictly and rearrangeably non-blocking multicast optical switches in which multicast is performed efficiently at the physical optical (lower) layer rather than upper layers (e.g., application layer). Advisors: Jitender S. Deogun and Dennis R. Alexande

Quality of service in optical burst switching networks

Tese dout., Engenharia Electrónica e Computação, Universidade do Algarve, 2009Fundação para e Ciência e a Tecnologi

Traffic and performance evaluation for optical networks. An Investigation into Modelling and Characterisation of Traffic Flows and Performance Analysis and Engineering for Optical Network Architectures.

The convergence of multiservice heterogeneous networks and ever increasing Internet applications, like peer to peer networking and the increased number of users and services, demand a more efficient bandwidth allocation in optical networks. In this context, new architectures and protocols are needed in conjuction with cost effective quantitative methodologies in order to provide an insight into the performance aspects of the next and future generation Internets. This thesis reports an investigation, based on efficient simulation methodologies, in order to assess existing high performance algorithms and to propose new ones. The analysis of the traffic characteristics of an OC-192 link (9953.28 Mbps) is initially conducted, a requirement due to the discovery of self-similar long-range dependent properties in network traffic, and the suitability of the GE distribution for modelling interarrival times of bursty traffic in short time scales is presented. Consequently, using a heuristic approach, the self-similar properties of the GE/G/¿ are being presented, providing a method to generate self-similar traffic that takes into consideration burstiness in small time scales. A description of the state of the art in optical networking providing a deeper insight into the current technologies, protocols and architectures in the field, which creates the motivation for more research into the promising switching technique of ¿Optical Burst Switching¿ (OBS). An investigation into the performance impact of various burst assembly strategies on an OBS edge node¿s mean buffer length is conducted. Realistic traffic characteristics are considered based on the analysis of the OC-192 backbone traffic traces. In addition the effect of burstiness in the small time scales on mean assembly time and burst size distribution is investigated. A new Dynamic OBS Offset Allocation Protocol is devised and favourable comparisons are carried out between the proposed OBS protocol and the Just Enough Time (JET) protocol, in terms of mean queue length, blocking and throughput. Finally the research focuses on simulation methodologies employed throughout the thesis using the Graphics Processing Unit (GPU) on a commercial NVidia GeForce 8800 GTX, which was initially designed for gaming computers. Parallel generators of Optical Bursts are implemented and simulated in ¿Compute Unified Device Architecture¿ (CUDA) and compared with simulations run on general-purpose CPU proving the GPU to be a cost-effective platform which can significantly speed-up calculations in order to make simulations of more complex and demanding networks easier to develop

Performance analysis of a proposed hybrid optical network

This dissertation discusses a novel Hybrid Optical Network (HON) that can provide service differentiation based on traffic characteristics (i.e., packet, burst, and long-lived flow) with QoS guarantee not only in network layer, but also in physical layer. The DHON consists of sophisticated edge-nodes, which can classify, monitor, and dynamically adjust optical channels in the core layer as traffic variation. The edge nodes aggregate traffic, identifying end-to-end delay by ingress queuing delay or burst timeout. The network can estimate number of channels by arriving traffic intensity and distribution with estimated upper-bound delay. The core layer employs two parallel optical switches (OCS, OBS) in the same platform. Thanks to the overflow system, the proposed network enhances utilization with fewer long distance premium channels. The premium channel can quickly handle burst traffic without new channel assignment. With less overprovisioning capacity design, the premium channel enhances utilization and decrease number of costly premium channels. This research also proposes mathematic models to represent particular DHON channels (i.e., circuit, packet, and burst). We employ method of moments based on overflow theory to forecast irregular traffic pattern from circuit-based channel (i.e., M/M/c/c) to overflow channel, in which G/G/1 model based on Ph/Ph/1 matrix can represent the overflow channel. Moreover, secondary channel supports packet-based traffic over wavelength channel with two service classes: Class I based on delay sensitive traffic (i.e., long flow) and Class II for non-delay sensitive traffic (e.g., best effort). In addition, mixture of traffic in the wavelength channels is investigated based on M/G/1 and M/G/2 with specific service time distribution for particular class. Finally, we show our DHON based on (O-O-O) switching paradigm has improved the performance over typical (O-E-O) switching network architecture based on NSF topology