2,489 research outputs found
Computational polarimetric microwave imaging
We propose a polarimetric microwave imaging technique that exploits recent
advances in computational imaging. We utilize a frequency-diverse cavity-backed
metasurface, allowing us to demonstrate high-resolution polarimetric imaging
using a single transceiver and frequency sweep over the operational microwave
bandwidth. The frequency-diverse metasurface imager greatly simplifies the
system architecture compared with active arrays and other conventional
microwave imaging approaches. We further develop the theoretical framework for
computational polarimetric imaging and validate the approach experimentally
using a multi-modal leaky cavity. The scalar approximation for the interaction
between the radiated waves and the target---often applied in microwave
computational imaging schemes---is thus extended to retrieve the susceptibility
tensors, and hence providing additional information about the targets.
Computational polarimetry has relevance for existing systems in the field that
extract polarimetric imagery, and particular for ground observation. A growing
number of short-range microwave imaging applications can also notably benefit
from computational polarimetry, particularly for imaging objects that are
difficult to reconstruct when assuming scalar estimations.Comment: 17 pages, 15 figure
MIMO Antenna Polynomial Weighted Average Design Method of Downward-Looking Array SAR
MIMO antenna polynomial weighted average design method of downward-looking array SAR was proposed from the angle of surveying and mapping in this paper, in order to solve the ill-posed problem that an equivalent virtual array can be implemented by a variety of physical transmitter-receiver arrays for bistatic MIMO linear array. For wave band, resolution, elevation precision, and working height concerned by the applications of surveying and mapping, the length of equivalent virtual array and actual physical array meeting the needs of large scale topographical mapping was solved. Then array numbers and position vectors of MIMO downward-looking array SAR of real aerial mapping platform were optimized. According to this design, some simulation experiments and comparisons were processed. The results proved the rationality and effectiveness of this array configuration by comparing the differences of 3D imaging results and the original simulation scene, counting mean and standard deviation of elevation reconstruction error eliminating the influence of shadow areas, and counting the probability of elevation reconstruction error within half a resolution of the whole scene and individual building area
Synthetic aperture imaging with intensity-only data
We consider imaging the reflectivity of scatterers from intensity-only data
recorded by a single moving transducer that both emits and receives signals,
forming a synthetic aperture. By exploiting frequency illumination diversity,
we obtain multiple intensity measurements at each location, from which we
determine field cross-correlations using an appropriate phase controlled
illumination strategy and the inner product polarization identity. The field
cross-correlations obtained this way do not, however, provide all the missing
phase information because they are determined up to a phase that depends on the
receiver's location. The main result of this paper is an algorithm with which
we recover the field cross-correlations up to a single phase that is common to
all the data measured over the synthetic aperture, so all the data are
synchronized. Thus, we can image coherently with data over all frequencies and
measurement locations as if full phase information was recorded
Recommended from our members
Synthetic Aperture Imaging With Intensity-Only Data.
We consider imaging the reflectivity of scatterers from intensity-only data
recorded by a single moving transducer that both emits and receives signals,
forming a synthetic aperture. By exploiting frequency illumination diversity,
we obtain multiple intensity measurements at each location, from which we
determine field cross-correlations using an appropriate phase controlled
illumination strategy and the inner product polarization identity. The field
cross-correlations obtained this way do not, however, provide all the missing
phase information because they are determined up to a phase that depends on the
receiver's location. The main result of this paper is an algorithm with which
we recover the field cross-correlations up to a single phase that is common to
all the data measured over the synthetic aperture, so all the data are
synchronized. Thus, we can image coherently with data over all frequencies and
measurement locations as if full phase information was recorded
A Downward-looking Three-dimensional Imaging Method for Airborne FMCW SAR Based on Array Antennas
AbstractWith regard to problems in conventional synthetic aperture radar (SAR), such as imaging distortion, beam limitation and failure in acquiring three-dimensional (3-D) information, a downward-looking 3-D imaging method based on frequency modulated continuous wave (FMCW) and digital beamforming (DBF) technology for airborne SAR is presented in this study. Downward-looking 3-D SAR signal model is established first, followed by introduction of virtual antenna optimization factor and discussion of equivalent-phase-center compensation. Then, compensation method is provided according to reside video phase (RVP) and slope term for FMCW SAR. As multiple receiving antennas are applied to downward-looking 3-D imaging SAR, range cell migration correction (RCMC) turns to be more complex, and corrective measures are proposed. In addition, DBF technology is applied in realizing cross-track resolution. Finally, to validate the proposed method, magnitude of slice, peak sidelobe ratio (PSLR), integrated sidelobe ratio (ISLR) and two-dimensional (2-D) contour plot of impulse response function (IRF) of point target in three dimensions are demonstrated. Satisfactory performances are shown by simulation results
On the use of compressed sensing techniques for improving multistatic millimeter-wave portal-based personnel screening
This work develops compressed sensing techniques to improve the performance of an active three dimensional (3D) millimeter wave imaging system for personnel security screening. The system is able to produce a high-resolution 3D reconstruction of the whole human body surface and reveal concealed objects under clothing. Innovative multistatic millimeter wave radar designs and algorithms, which have been previously validated, are combined to improve the reconstruction results over previous approaches. Compressed Sensing techniques are used to drastically reduce the number of sensors, thus simplifying the system design and fabrication. Representative simulation results showing good performance of the proposed system are provided and supported by several sample measurement
- …