Aerospace medicine and biology: A continuing bibliography with indexes, supplement 218, April 1981

This bibliography lists 161 reports, articles, and other documents introduced into the NASA scientific and technical information system in March 1981

Deterministic, Efficient Variation of Circuit Components to Improve Resistance to Reverse Engineering

This research proposes two alternative methods for generating semantically equivalent circuit variants which leave the circuit\u27s internal structure pseudo-randomly determined. Component fusion deterministically selects subcircuits using a component identification algorithm and replaces them using a deterministic algorithm that generates canonical logic forms. Component encryption seeks to alter the semantics of individual circuit components using an encoding function, but preserves the overall circuit semantics by decoding signal values later in the circuit. Experiments were conducted to examine the performance of component fusion and component encryption against representative trials of subcircuit selection-and-replacement and Boundary Blurring, two previously defined methods for circuit obfuscation. Overall, results support the conclusion that both component fusion and component encryption generate more secure variants than previous methods and that these variants are more efficient in terms of required circuit delay and the power and area required for their implementation

Orbital assembly and maintenance study

The requirements, conceptual design, tradeoffs, procedures, and techniques for orbital assembly of the support structure of the microwave power transmission system and the radio astronomy telescope are described. Thermal and stress analyses, packaging, alignment, and subsystems requirements are included along with manned vs. automated and transportation tradeoffs. Technical and operational concepts for the manned and automated maintenance of satellites were investigated and further developed results are presented

Manufacturing High Entropy Alloys: Pathway to Industrial Competitiveness

High entropy alloys (HEAs) provide a transformative opportunity to design materials that are custom tailored to the distinct needs of a given application, thereby shifting the paradigm from “apply the material you have” to “engineer the material you need.” HEAs will enable high-performance manufactured goods that are competitive in the international marketplace through extraordinary material properties and unique property combinations. HEAs deliver new choices to manufacturers to create alternatives to materials that are rare, hazardous, expensive, or subject to international restrictions or conflict. The potential benefits of HEAs span diverse fields and applications, and show promise to not only accelerate economic growth and domestic competitive advantage, but also address pressing societal challenges. These include solid state cooling, liquefied natural gas handling, nuclear degradation- resistant materials, corrosion-resistant heat exchangers, and efficiency gains from high temperature performance that advance national energy goals; high-performance aerospace materials and ultra- hardness ballistics that support national security; and strong, corrosion-resistant medical devices and advances in magnetic resonance imaging that are essential to national health priorities. Research advances are setting the stage to realize each of these vital areas. However, research advances made to-date to produce lab-scale prototypes do not lend themselves to manufacturing at scale. For Americans to fully benefit from HEAs, the emerging technologies must be translated into products manufactured at scale in the United States. However, manufacturers and HEA experts who are working to bridge this gap are encountering cross-cutting barriers in manufacturing processes, testing, data, and access to the necessary resources. Through strategic public- and private- sector research and investment, these barriers can be overcome. The United States has invested in both HEA research and advanced materials resources, such as material sample creation at the Ames Laboratory Materials Preparation Center, material characterization at Oak Ridge National Laboratory’s Neutron User Facilities, and modeling and analysis through the National Institute of Standards and Technology’s Material Genome Initiative. A vast array of research and expertise has been fostered at federal laboratories and universities, yielding promising alloys, manufacturing processes, and analysis methods.National Science Foundation, Grant No. 1552534https://deepblue.lib.umich.edu/bitstream/2027.42/146747/1/Manufacturing-HEAs.pdf-1Description of Manufacturing-HEAs.pdf : Main articl

Circuit-Variant Moving Target Defense for Side-Channel Attacks on Reconfigurable Hardware

With the emergence of side-channel analysis (SCA) attacks, bits of a secret key may be derived by correlating key values with physical properties of cryptographic process execution. Power and Electromagnetic (EM) analysis attacks are based on the principle that current flow within a cryptographic device is key-dependent and therefore, the resulting power consumption and EM emanations during encryption and/or decryption can be correlated to secret key values. These side-channel attacks require several measurements of the target process in order to amplify the signal of interest, filter out noise, and derive the secret key through statistical analysis methods. Differential power and EM analysis attacks rely on correlating actual side-channel measurements to hypothetical models. This research proposes increasing resistance to differential power and EM analysis attacks through structural and spatial randomization of an implementation. By introducing randomly located circuit variants of encryption components, the proposed moving target defense aims to disrupt side-channel collection and correlation needed to successfully implement an attac

Index to 1981 NASA Tech Briefs, volume 6, numbers 1-4

Short announcements of new technology derived from the R&D activities of NASA are presented. These briefs emphasize information considered likely to be transferrable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. This index for 1981 Tech Briefs contains abstracts and four indexes: subject, personal author, originating center, and Tech Brief Number. The following areas are covered: electronic components and circuits, electronic systems, physical sciences, materials, life sciences, mechanics, machinery, fabrication technology, and mathematics and information sciences

Benefits assessment of active control technology and related cockpit technology for rotorcraft

Two main-rotor active control concepts, one incorporating multicyclic actuators located just below the swashplate, and the other providing for the actuators and power supplies to be located in the rotating frame are considered. Each design concept is integrated with cockpit controllers and displays appropriate to the actuation concept in each case. The benefits of applying the defined ACT/RCT concepts to rotorcraft are quantified by comparison to the baseline model 412 helicopter. These benefits include, in the case of one active control concept; (1) up to 91% reduction in 4/rev hub shears; (2) a flight safety failure rate of 1.96 x 10 to the 8th power failures per flight-hour; (3) rotating controls/rotor hub drag reduction of 40%; (4) a 9% reduction in control system weight; and (5) vibratory deicing. The related cockpit concept reduces pilot workload for critical mission segments as much as 178% visual and 25% manual

NASA SBIR abstracts of 1990 phase 1 projects

The research objectives of the 280 projects placed under contract in the National Aeronautics and Space Administration (NASA) 1990 Small Business Innovation Research (SBIR) Phase 1 program are described. The basic document consists of edited, non-proprietary abstracts of the winning proposals submitted by small businesses in response to NASA's 1990 SBIR Phase 1 Program Solicitation. The abstracts are presented under the 15 technical topics within which Phase 1 proposals were solicited. Each project was assigned a sequential identifying number from 001 to 280, in order of its appearance in the body of the report. The document also includes Appendixes to provide additional information about the SBIR program and permit cross-reference in the 1990 Phase 1 projects by company name, location by state, principal investigator, NASA field center responsible for management of each project, and NASA contract number

Proceedings of the 21st Conference on Formal Methods in Computer-Aided Design – FMCAD 2021

The Conference on Formal Methods in Computer-Aided Design (FMCAD) is an annual conference on the theory and applications of formal methods in hardware and system verification. FMCAD provides a leading forum to researchers in academia and industry for presenting and discussing groundbreaking methods, technologies, theoretical results, and tools for reasoning formally about computing systems. FMCAD covers formal aspects of computer-aided system design including verification, specification, synthesis, and testing

Space station automation of common module power management and distribution

The purpose is to automate a breadboard level Power Management and Distribution (PMAD) system which possesses many functional characteristics of a specified Space Station power system. The automation system was built upon 20 kHz ac source with redundancy of the power buses. There are two power distribution control units which furnish power to six load centers which in turn enable load circuits based upon a system generated schedule. The progress in building this specified autonomous system is described. Automation of Space Station Module PMAD was accomplished by segmenting the complete task in the following four independent tasks: (1) develop a detailed approach for PMAD automation; (2) define the software and hardware elements of automation; (3) develop the automation system for the PMAD breadboard; and (4) select an appropriate host processing environment