5,670 research outputs found
Performance Analysis of QoS in PMP Mode WiMax Networks
IEEE 802.16 standard supports two different topologies: point to multipoint
(PMP) and Mesh. In this paper, a QoS mechanism for point to multipoint of IEEE
802.16 and BS scheduler for PMP Mode is proposed. This paper also describes
quality of service over WiMAX networks. Average WiMAX delay, Average WiMAX load
and Average WiMAX throughput at base station is analyzed and compared by
applying different scheduler at Base station and at fixed nodes
Joint Concurrent Routing and Multi-Pointer Packet Scheduling in IEEE 802.16 Mesh Networks
IEEE 802.16, also known as Worldwide Interoperability for Microwave Access
(WiMAX), is a standardization effort carried out by the IEEE to provide last-mile
broadband access to end users. The IEEE 802.16 standard
supports two medium access control (MAC) modes - a mandatory point to multipoint
(PMP) mode and an optional mesh mode. In this paper, we propose an
asymmetric interference aware routing algorithm and a new multipointer approach in
implementing scheduling algorithms for IEEE 802.16 mesh networks. We modify three
different centralized scheduling algorithms, fixed scheduling,
ordered scheduling and per-slot scheduling using multipointer approach to allow for
spatial reuse (SR) in IEEE 802.16 mesh networks. Simulation results
reveal that fixed scheduling with SR provides the best performance
USING THE CONCEPT OF A MAC SCHEDULING ALGORITHM FOR WIMAX NETWORKING ARCHITECTURE
Wimax is wireless digital communication system which is intended for wireless Metropolitan area networks. Wimax standsfor worldwide interoperability for microwave access. Wimax Technology enables ubiquitous delivery of wireless broadbandservice for fixed and or mobile users. An IEEE 802.16 wireless system can provide broadband wireless access to subscriberstations and operate in mesh mode. The communication between a subscriber station and a base station can pass through oneor more intermediate subscriber stations. The IEEE 802.16 standard provides a centralized scheduling mechanism thatsupports contention-free and resource-guarantee transmission services in mesh mode. This paper show how MAC schedulingarchitecture is emphasized for IEEE 802.16 standards.Keywords: MAC, QoS class scheduling, IEEE 802.16, WiMax, Network
Nonlinearity and Noise Effects in Multi-level Signal Millimeter-Wave over Fiber Transmission using Single- and Dual-Wavelength Modulation
We transmit multilevel quadrature amplitude modulation (QAM) data-IEEE 802.16 schemes-at 20 MSps and an orthogonal frequency-division multiplexing (OFDM) 802.11 g signal (54 Mbps) with a 25 GHz millimeter-wave over fiber system, which employs a dual wavelength source, over 20 km of single mode fiber. Downlink data transmission is successfully demonstrated over both optical and wireless (up to 12 m) paths with good error vector magnitude. An analysis of two different schemes, in which data is applied to one (single) and both (dual) of the wavelengths of a dual wavelength source, is carried out. The system performance is analyzed through simulation and a good match with experimental results is obtained. The analysis investigates the impact of Mach-Zehnder modulator (MZM) and RF amplifier nonlinearity and various noise sources, such as laser relative intensity noise, amplified spontaneous emission, thermal, and shot noise. A comparison of single carrier QAM IEEE 802.16 and OFDM in terms of their sensitivity to the distortions from MZM and RF amplifier nonlinearity is also presented
The history of WiMAX: a complete survey of the evolution in certification and standarization for IEEE 802.16 and WiMAX
Most researchers are familiar with the technical features of WiMAX technology but the evolution that WiMAX went through, in terms of standardization and certification, is missing and unknown to most people. Knowledge of this historical process would however aid to understand how WiMAX has become the widespread technology that it is today. Furthermore, it would give insight in the steps to undertake for anyone aiming at introducing a new wireless technology on a worldwide scale. Therefore, this article presents a survey on all relevant activities that took place within three important organizations: the 802.16 Working Group of the IEEE (Institute of Electrical and Electronics Engineers) for technology development and standardization, the WiMAX Forum for product certification and the ITU (International Telecommunication Union) for international recognition. An elaborated and comprehensive overview of all those activities is given, which reveals the importance of the willingness to innovate and to continuously incorporate new ideas in the IEEE standardization process and the importance of the WiMAX Forum certification label granting process to ensure interoperability. We also emphasize the steps that were taken in cooperating with the ITU to improve the international esteem of the technology. Finally, a WiMAX trend analysis is made. We showed how industry interest has fluctuated over time and quantified the evolution in WiMAX product certification and deployments. It is shown that most interest went to the 2.5 GHz and 3.5GHz frequencies, that most deployments are in geographic regions with a lot of developing countries and that the highest people coverage is achieved in Asia Pacific. This elaborated description of all standardization and certification activities, from the very start up to now, will make the reader comprehend how past and future steps are taken in the development process of new WiMAX features
Performance Study of Bandwidth Request Mechanisms in IEEE 802.16e Networks
WiMAX (Worldwide Interoperability for Microwave Access) is the IEEE 802.16 standards-based wireless technology that provides fixed and mobile Internet access for Metropolitan
Area Networks (MAN). The IEEE 802.16 std. includes medium access control (MAC) and physical (PHY) layer pecifications and is consider to be a promising technology. Bandwidth reservation is employed to provide quality of service (QoS) to guarantee different services specified in the standard. A bandwidth request/grant scheme is defined in the IEEE 802.16 standard. There are two types of
bandwidth request (BR) mechanisms, i.e., polling
and contention resolution, which are defined in the
standard. As specified, connections belonging to
scheduling classes of extended real-time polling
service, non-real-time polling service, and best effort
have options to make BRs via both mechanisms,
depending on the scheduling decision made by the
base station (BS). This paper attempts the
comparative study of BR mechanisms for different
service classes defined in the standard
Denial of service attacks and challenges in broadband wireless networks
Broadband wireless networks are providing internet and related services to end users. The three most important broadband wireless technologies are IEEE 802.11, IEEE 802.16, and
Wireless Mesh Network (WMN). Security attacks and
vulnerabilities vary amongst these broadband wireless networks because of differences in topologies, network operations and physical setups. Amongst the various security risks, Denial of Service (DoS) attack is the most severe security threat, as DoS can compromise the availability and integrity of broadband
wireless network. In this paper, we present DoS attack issues in broadband wireless networks, along with possible defenses and future directions
WLC22-4: Efficient request mechanism usage in IEEE 802.16
IEEE 802.16 protocols for metropolitan broadband wireless access systems have been standardized recently. According to the standard, a subscriber station can deliver bandwidth request messages to a base station by numerous methods. This paper provides both the simulation and analytical models for the investigation of specified random access method, which is compared with centralized polling and station- grouping mechanisms. Based on the assumptions of Bernoulli request arrival process and ideal channel conditions, the mean delay of a request transmission is evaluated for varying number of transmission opportunities and different arrival rates
A Fair and Efficient Packet Scheduling Scheme for IEEE 802.16 Broadband Wireless Access Systems
This paper proposes a fair and efficient QoS scheduling scheme for IEEE
802.16 BWA systems that satisfies both throughput and delay guarantee to
various real and non-real time applications. The proposed QoS scheduling scheme
is compared with an existing QoS scheduling scheme proposed in literature in
recent past. Simulation results show that the proposed scheduling scheme can
provide a tight QoS guarantee in terms of delay, delay violation rate and
throughput for all types of traffic as defined in the WiMAX standard, thereby
maintaining the fairness and helps to eliminate starvation of lower priority
class services. Bandwidth utilization of the system and fairness index of the
resources are also encountered to validate the QoS provided by our proposed
scheduling scheme
- …