Hybrid Beamforming With Sub-arrayed MIMO Radar: Enabling Joint Sensing and Communication at mmWave Band

In this paper, we propose a beamforming design for dual-functional radar-communication (DFRC) systems at the millimeter wave (mmWave) band, where hybrid beamforming and sub-arrayed MIMO radar techniques are jointly exploited. We assume that a base station (BS) is serving a user equipment (UE) located in a Non-Line-of-Sight (NLoS) channel, which in the meantime actively detects multiple targets located in a Line-of-Sight (LoS) channel. Given the optimal communication beamformer and the desired radar beampattern, we propose to design the analog and digital beamformers under non-convex constant-modulus (CM) and power constraints, such that the weighted summation of the communication and radar beamforming errors is minimized. The formulated optimization problem can be decomposed into three subproblems, and is solved by the alternating minimization approach. Numerical simulations verify the feasibility of the proposed beamforming design, and show that our approach offers a favorable performance tradeoff between sensing and communication.Comment: 5 pages, 2 figures, submitted to ICASSP 201

Adaptive Beam-Frequency Allocation Algorithm with Position Uncertainty for Millimeter-Wave MIMO Systems

Envisioned for fifth generation (5G) systems, millimeter-wave (mmWave) communications are under very active research worldwide. Although pencil beams with accurate beamtracking may boost the throughput of mmWave systems, this poses great challenges in the design of radio resource allocation for highly mobile users. In this paper, we propose a joint adaptive beam-frequency allocation algorithm that takes into account the position uncertainty inherent to high mobility and/or unstable users as, e.g., Unmanned Aerial Vehicles (UAV), for whom this is a major problem. Our proposed method provides an optimized beamwidth selection under quality of service (QoS) requirements for maximizing system proportional fairness, under user position uncertainty. The rationale of our scheme is to adapt the beamwidth such that the best trade-off among system performance (narrower beam) and robustness to uncertainty (wider beam) is achieved. Simulation results show that the proposed method largely enhances the system performance compared to reference algorithms, by an appropriate adaptation of the mmWave beamwidths, even under severe uncertainties and imperfect channel state information (CSIs).Comment: 5 pages, 6 figures, 1 table, 1 algorith

An antenna switching based NOMA scheme for IEEE 802.15.4 concurrent transmission

This paper introduces a Non-Orthogonal Multiple Access (NOMA) scheme to support concurrent transmission of multiple IEEE 802.15.4 packets. Unlike collision avoidance Multiple Access Control (MAC), concurrent transmission supports Concurrent-MAC (C-MAC) where packet collision is allowed. The communication latency can be reduced by C-MAC because a user can transmit immediately without waiting for the completion of other users’ transmission. The big challenge of concurrent transmission is that error free demodulation of multiple collided packets hardly can be achieved due to severe Multiple Access Interference (MAI). To improve the demodulation performance with MAI presented, we introduce an architecture with multiple switching antennas sharing a single analog transceiver to capture spatial character of different users. Successive Interference Cancellation (SIC) algorithm is designed to separate collided packets by utilizing the spatial character. Simulation shows that at least five users can transmit concurrently to the SIC receiver equipped with eight antennas without sacrificing Packet Error Rate

1-Bit Massive MIMO Downlink Based on Constructive Interference

In this paper, we focus on the multiuser massive multiple-input single-output (MISO) downlink with low-cost 1-bit digital-to-analog converters (DACs) for PSK modulation, and propose a low-complexity refinement process that is applicable to any existing 1-bit precoding approaches based on the constructive interference (CI) formulation. With the decomposition of the signals along the detection thresholds, we first formulate a simple symbol-scaling method as the performance metric. The low-complexity refinement approach is subsequently introduced, where we aim to improve the introduced symbol-scaling performance metric by modifying the transmit signal on one antenna at a time. Numerical results validate the effectiveness of the proposed refinement method on existing approaches for massive MIMO with 1-bit DACs, and the performance improvements are most significant for the low-complexity quantized zero-forcing (ZF) method.Comment: 5 pages, EUSIPCO 201

Hybrid Analog-Digital Precoding for Interference Exploitation

We study the multi-user massive multiple-input-single-output (MISO) and focus on the downlink systems where the base station (BS) employs hybrid analog-digital precoding with low-cost 1-bit digital-to-analog converters (DACs). In this paper, we propose a hybrid downlink transmission scheme where the analog precoder is formed based on the SVD decomposition. In the digital domain, instead of designing a linear transmit precoding matrix, we directly design the transmit signals by exploiting the concept of constructive interference. The optimization problem is then formulated based on the geometry of the modulation constellations and is shown to be non-convex. We relax the above optimization and show that the relaxed optimization can be transformed into a linear programming that can be efficiently solved. Numerical results validate the superiority of the proposed scheme for the hybrid massive MIMO downlink systems.Comment: 5 pages, EUSIPCO 201

Jointly Optimal Spatial Channel Assignment and Power Allocation for MIMO SWIPT Systems

The joint design of spatial channel assignment and power allocation in Multiple Input Multiple Output (MIMO) systems capable of Simultaneous Wireless Information and Power Transfer (SWIPT) is studied. Assuming availability of channel state information at both communications ends, we maximize the harvested energy at the multi-antenna receiver, while satisfying a minimum information rate requirement for the MIMO link. We first derive the globally optimal eigenchannel assignment and power allocation design, and then present a practically motivated tight closed-form approximation for the optimal design parameters. Selected numerical results verify the validity of the optimal solution and provide useful insights on the proposed designs as well as the pareto-optimal rate-energy tradeoff.Comment: 5 pages; 4 figures; accepted to IEEE journal 201