Contributions in inverse synthetic aperture radar imaging

Ph.DDOCTOR OF PHILOSOPH

Multichannel techniques for 3D ISAR

This thesis deals with the challenge of forming 3D target reconstruction by using spatial multi-channel ISAR configurations. The standard output of an ISAR imaging system is a 2D projection of the true three-dimensional target reflectivity onto an image plane. The orientation of the image plane cannot be predicted a priori as it strongly depends on the radar-target geometry and on the target motion, which is typically unknown. This leads to a difficult interpretation of the ISAR images. In this scenario, this thesis aim to give possible solutions to such problems by proposing three 3D processing based on interferometry, beamforming techniques and MIMO InISAR systems. The CLEAN method for scattering centres extraction is extended to multichannel ISAR systems and a multistatic 3D target reconstruction that is based on a incoherent technique is suggested

Multichannel techniques for 3D ISAR

This thesis deals with the challenge of forming 3D target reconstruction by using spatial multi-channel ISAR configurations. The standard output of an ISAR imaging system is a 2D projection of the true three-dimensional target reflectivity onto an image plane. The orientation of the image plane cannot be predicted a priori as it strongly depends on the radar-target geometry and on the target motion, which is typically unknown. This leads to a difficult interpretation of the ISAR images. In this scenario, this thesis aim to give possible solutions to such problems by proposing three 3D processing based on interferometry, beamforming techniques and MIMO InISAR systems. The CLEAN method for scattering centres extraction is extended to multichannel ISAR systems and a multistatic 3D target reconstruction that is based on a incoherent technique is suggested

Decentralized approach for translational motion estimation with multistatic inverse synthetic aperture radar systems

This paper addresses the estimation of the target translational motion by using a multistatic Inverse Synthetic Aperture Radar (ISAR) system composed of an active radar sensor and multiple receiving-only devices. Particularly, a two-step decentralized technique is derived: the first step estimates specific signal parameters (i.e., Doppler frequency and Doppler rate) at the single-sensor level, while the second step exploits these estimated parameters to derive the target velocity and acceleration components. Specifically, the second step is organized in two stages: the former is for velocity estimation, while the latter is devoted to velocity estimation refinement if a constant velocity model motion can be regarded as acceptable, or to acceleration estimation if a constant velocity assumption does not apply. A proper decision criterion to select between the two motion models is also provided. A closed-form theoretical performance analysis is provided for the overall technique, which is then used to assess the achievable performance under different distributions of the radar sensors. Additionally, a comparison with a state-of-the-art centralized approach has been carried out considering computational burden and robustness. Finally, results obtained against experimental multisensory data are shown confirming the effectiveness of the proposed technique and supporting its practical application

Ground-based ISAR imaging of cooperative and non-cooperative sea vessels with 3-D rotational motion

Includes bibliographical references (leaves 175-188).Inverse Synthetic Aperture Radar (ISAR) images of sea vessels are a rich source of information for radar cross section (RCS) measurement and ship classification. However, ISAR imaging of sea vessels is a challenging task because the 3-D rotational motion of such vessels often gives rise to blurring. Blurry ISAR images are not desirable because they lead to inaccurate parameter estimation, which reduces the probability of correct classification. The objective of this thesis is to explain how 3-D rotational motion causes blurring in ISAR imagery and to develop effective techniques for imaging cooperative and non-cooperative sea vessels for RCS measurement and ship-classification purposes respectively. Much research has been done to investigate the effect of 3-D rotational motion on an ISAR image under the assumption that an object's axis of rotation is constant over the coherent processing interval (CPI). In this thesis, a new quaternion-based system model is proposed to characterise the amount of blurring in an ISAR image when a sea vessel possesses 3-D rotational motion over a CPI. Simulations were done to characterise the migration of a scatterer through Doppler cells due to the time-varying nature of the Doppler generating axis of rotation. Simulation results with realistic 3-D rotational motion show substantial blurring in the cross-range dimension of the resulting ISAR image, and this blurring is attributed to the time-varying nature of the angle of the Doppler generating axis of rotation and the object's rotation rate over the CPI

Subspace-based methodologies for the non-cooperative identification of aircraft by means of a synthetic database of radar signatures

Una de las principales preocupaciones dentro del mundo de la aviación es la identificación rápida, eficaz y fiable de cualquier objeto observado que se encuentre a cualquier distancia y bajo cualquier condición atmosférica. Gracias a los avances en tecnología radar, esto se ha conseguido. De hecho, los radares son los sensores más adecuados para el reconocimiento de blancos en vuelo ya que pueden operar en cualquier condición. El reconocimiento de blancos mediante radar es hoy un hecho, existiendo sistemas IFF (Identification Friend or Foe) capaces de comunicarse con una aeronave haciendo posible que ella misma se identifique por sí sola. Sin embargo, esta necesidad de comunicación directa puede ser un inconveniente en ciertos momentos. Así, aparecen las técnicas no cooperativas o NCTI (Non-Cooperative Target Identification), que no establecen ninguna comunicación con el blanco y normalmente hacen uso de radares de alta resolución. Éstos ven los blancos como compuestos por diversos puntos que dispersan la energía emitida por el radar, generando así una imagen de la reflectividad de un blanco, lo que se ha llamado su firma radar. Comparando dicha firma radar con una base de datos de firmas radar de blancos conocidos es posible establecer, mediante una serie de algoritmos de identificación, el tipo de blanco iluminado por el radar. Uno de los temas más cuestionados es cómo poblar y actualizar esta base de datos de firmas radar. De manera ideal, la base de datos debería de contener medidas de blancos reales en vuelo; desafortunadamente, la principal desventaja de esta estrategia radica en la dificultad de obtener firmas radar de aviones neutrales o enemigos. Por esta razón, esta tesis propone utilizar firmas radar de blancos ideales, generadas mediante simulaciones electromagnéticas, como base de datos. Con el avance de las herramientas de predicción electromagnética es posible obtener de manera rápida y a bajo coste firmas radar de cualquier blanco deseado y en cualquier orientación. De este modo, el principal objetivo de esta tesis yace en el desarrollo de algoritmos eficientes de identificación de aeronaves en vuelo de manera no cooperativa, con altas tasas de acierto y empleando una base de datos de blancos obtenida mediante simulación electromagnética. El escenario propuesto consiste en la comparación de firmas radar reales obtenidas en una campaña de medidas con una base de datos compuesta por firmas radar simuladas, con ello se pretende por un lado, simular un escenario más realista, en el que las firmas de los blancos recogidas por el radar no tienen porqué tener la misma calidad que aquellas de la base de datos y por otro, comprobar que la identificación de un avión real mediante simulaciones es posible

Abstracts on Radio Direction Finding (1899 - 1995)

The files on this record represent the various databases that originally composed the CD-ROM issue of "Abstracts on Radio Direction Finding" database, which is now part of the Dudley Knox Library's Abstracts and Selected Full Text Documents on Radio Direction Finding (1899 - 1995) Collection. (See Calhoun record https://calhoun.nps.edu/handle/10945/57364 for further information on this collection and the bibliography). Due to issues of technological obsolescence preventing current and future audiences from accessing the bibliography, DKL exported and converted into the three files on this record the various databases contained in the CD-ROM. The contents of these files are: 1) RDFA_CompleteBibliography_xls.zip [RDFA_CompleteBibliography.xls: Metadata for the complete bibliography, in Excel 97-2003 Workbook format; RDFA_Glossary.xls: Glossary of terms, in Excel 97-2003 Workbookformat; RDFA_Biographies.xls: Biographies of leading figures, in Excel 97-2003 Workbook format]; 2) RDFA_CompleteBibliography_csv.zip [RDFA_CompleteBibliography.TXT: Metadata for the complete bibliography, in CSV format; RDFA_Glossary.TXT: Glossary of terms, in CSV format; RDFA_Biographies.TXT: Biographies of leading figures, in CSV format]; 3) RDFA_CompleteBibliography.pdf: A human readable display of the bibliographic data, as a means of double-checking any possible deviations due to conversion